Characteristics And Maintenance Methods Of Leather Shoes

1, metal

The metal sheepskin was originally developed in Italy, which is made from the first layer of cowhide. The surface metal coating is not resistant to organic solvents, especially benzene, which is easy to remove paint.

Maintenance of leather materials: use semi wet soft cloth to wipe, you can not easily encounter benzene solvents.

The skin should be bruised and scratched.

If there is a slight paint drop, you can use color nail polish to remedy.

2. Rub the hide.

This leather material is light colored and has a stable base color. It does not decolorization. The surface is dark and easy to erase. Eraser or hard cloth can erase the dark color of the surface, and then give the effect of double color retro effect.

Maintenance: use pparent shoe milk to throw fine wax.

3. Sheepskin

The sheepskin sheepskin was originally developed in Italy. The skin is made of metal coated paper on the surface of the top sheepskin and is stripped of metal paper after high temperature and high pressure.

Its film sheepskin is not resistant to organic solvents, especially toluene. This film is easy to fall off. If there is a slight drop of film, it can be sprayed with pearlescent powder.

Maintenance: use semi wet soft cloth to wipe, you can not easily encounter benzene solvents, this skin avoid bruising and scratching.

If the paint is removed, it can be remedied with matching nail polish.

4, bright sheepskin

This skin is made from the first layer sheepskin, similar to the sheepskin sheepskin, which is made of gold foil paper after high temperature, high pressure and press plate.

Maintenance: use semi wet soft cloth to wipe, you can not easily encounter benzene solvents, this skin avoid bruising and scratching.

If the paint is removed, it can be remedied with matching nail polish.

5. Fish skin

It is made from fish peeling and scalding. It is dyed with pure benzene. The skin and belly and back patterns are different. Therefore, it can be matched with double in production, because the fish skin is smaller in size and is usually used in sandals and leather.

Maintenance: use soft brush to clean the vamp along the direction, pay attention to waterproofing, do not collide.

It is easy to decolorization because of fish soaking. If there is slight pollution, whitening or fading, you can use shoe polish to light or spray brightening agent to restore skin color and shine.

6. Double color wrinkled cow skin.

The appearance of the leather is smooth and smooth. The skin is made of egg white compound on the surface of the cowhide. After solidification, it is like a bright film. It adheres firmly to the leather surface. When the leather is dyed, its surface color is different from each other, resulting in a two color effect.

Maintenance: avoid collisions with hard objects, scratch easily, and do not use hard brush to clean uppers. When high temperature is easy to deform, high and cold are easy to crack, avoid drying, roasting or cold weather.

(also can be used for skin care products) color selection is better.

7, two color mirror elasticity PU

The material is smooth, smooth, soft and has good elasticity. When dyeing, its surface color is deep to shallow. Finally, it achieves double color effect. It is easy to produce slight wrinkles when extruded or bent. This is normal, but try to avoid excessive extrusion and bending, forming serious wrinkle marks.

Maintenance: avoid collisions with hard objects, scratch easily, and do not use hard brush to clean uppers. When high temperature is easy to deform, high and cold are easy to crack, avoid drying, roasting or cold weather.

(also can be used for skin care products) color selection is better.

8. Snake pattern

Snake skin is originally developed in Italy. It is made of printing and coating technology, and then painted and embossed into snake scales. So the correct name should be called serpentine cow leather.

At present, there are two kinds of serpentine leather and snake skin sheepskin.

Maintenance: it is easier to maintain, use shoe milk and leather brightener to maintain and prevent hard changes.

Avoid collision with hard objects, scratch easily, not use hard brush to clean uppers. When high temperature is easy to deform, high and cold are easy to crack, avoid drying, roasting or cold weather.

(also can be used for skin care products) color selection is better.

9. Ostrich cowhide

Ostrich cowhide was originally developed in Italy. It is a pattern of ostrich skin pattern embossed by cowhide.

Ostrich skin pattern unique, strong sense of three-dimensional, but thin cortex, poor elongation, usually bags, bags.

The ostrich cowhide shoes have the characteristics of cowhide, and the ostrich skin pattern has achieved the perfect effect.

Maintenance: ostrich hide has no coating on the surface. Leather making process is similar to wax coating. The method of maintenance is to use wax wax maintenance.

It is easy to absorb moisture and stains. The color is more prominent. When you wear, you should avoid water stains or other stains, keep your shoes clean, do not rain, clean the dust when you do not wear them, use shoes and milk to maintain, maintain the brightness of the upper, and prevent mildew.

(also can be used for skin care products) color selection is better.

10, two nuts

This is made of second layers of cowhide. The fiber structure is denser than the top layer, and the permeability is less than that of the top layer. This kind of leather is mostly used for producing casual shoes and sports shoes.

Maintenance: in normal maintenance, use soft brush (blush brush) to rub in the same direction, so that texture can be smoothed. Shoe polish and shoe paste can not be used. Avoid touching glue and not soaking.

If you want to soak, please dry it as soon as possible.

The dough is easily decolorizing because of the dough soaking. If there is a slight pollution of white or discoloration, it can be used with the light of the shoe powder or the light spray of the brightening agent. It can restore the color of the villi, and the brightness is as new as the new.

11, gloss waxed leather

This is made from the big cowhide of the top layer. The surface is polished and waxed, and the color becomes darker and darker, showing a slight double color effect.

Maintenance: wax maintenance at ordinary times

12, flat cattle leather.

Niuba leather usually uses the front surface of the cowhide with pores to grind through the fine sandpaper, forming a flannelette effect, partly and vaguely seeing the pores.

Maintenance: usually with a soft brush (blush brush) can also be rubbed in the same direction, so that texture can be smooth, can not be used shoe polish, shoe paste, avoid touching glue, not to soak.

If you want to soak, please dry it as soon as possible.

Because the skin is easy to decolor, if it is slightly polluted, whitening or fading, you can use the shoe powder to smear lightly or brighten the brightening agent, and then restore the fluff color and brightness.

13, throwing the cowhide.

In general, it is made of ox skin made of Chinese and big ox head. The surface pattern is not pressed. However, under the action of the drum, the surface is naturally contracted to form a skin that resembles a litchi pattern. There is a phenomenon of uneven size and shades in a leather pattern, and the finished shoes can be matched with two pairs.

This specification 2.2-2.4mm is generally used for male production, and women's shoes are usually 1.0-1.2mm thick.

Maintenance: normal cowhide maintenance method.

It can also be maintained with lotion or hand cream.

(also can be used for skin care products) color selection is better.

14. Coating sheepskin

This is a goat skin processing, the general thickness of 0.7-0.9MM, the surface of the skin is damaged, light grinding and finishing, thick coating, and leather texture is not clear.

Maintenance: goats skin is crispy, avoid scratching, use colourless or colourless shoes to maintain.

(also can be used for skin care products) color selection is better.

15, environmental protection sheepskin

The environment-friendly sheepskin was originally developed in Italy. This skin is made of sheep skin. It has soft handle, clear grain surface, and very light surface coating, so it is not easy to cover up.

Maintenance: usually use colourless or colourless shoe milk to wipe.

Attention should be paid to wearing, because the sheepskin is comfortable, but the tear strength is poor, so avoid collision and strenuous exercise.

Cleaning can be done with alcohol.