Women'S Seasonal Change Menu Shoes, Popularization Of Single Shoes, Little Knowledge

single

Definition

Single shoes are shoes with single skin or single layer cloth.

Generally speaking, people like to divide their shoes into three categories: cotton shoes, single shoes and sandals. Cotton shoes are mainly worn for the cold season, and sandals are mainly for summer wear, so most of the shoes are mainly single shoes.

They have to divide them in detail, but there are many, such as casual shoes, sports shoes, fashion shoes, including some of the boots now belonging to the category of single shoes.

Simply speaking, single shoes are not thick shoes, and fabrics are relatively thin, so they match well.

It will not be as big as those thick shoes.

Principles for evaluating the quality of single shoes

1, the quality of shoe material includes two parts, vamp and shoe.

Authenticity

Natural leather is genuine leather and has pores. When the eyes are difficult to see clearly, thumb can be pressed on the leather surface to see if there is a fine leather pattern beside the thumb.

It has fine texture, disappearance of fine lines after releasing hands, good elasticity of leather shoes, and better natural leather.

If there is no fine grain, most of them are not natural leather, including two layers of shaving film leather.

Another notable feature of natural leather is the blemish on the surface.

Generally, the natural leather upper is slightly defective in the inside of the shoe and in other inconspicuous places, such as uneven skin width, bright furuncle, tick boil and so on.

There are three layers of cross section of natural leather, which are dense and different. The epidermis is very fine and flexible, and there are dense dermis in the middle. The following is a loose meat surface fiber layer, and there is no obvious demarcation between layers.

Leather shoes are used as reinforcing materials to prevent extended deformation and improve foot touch.

It is required that the shoe lining material has fine touch, breathability, excellent moisture absorption and moisture retention, and no color loss.

The middle and upper leather shoes are made of natural leather and cotton cloth.

If the vamp is natural leather, the shoe lining is the artificial substitute leather. It can only be regarded as the middle and low grade shoes.

Most consumers ignore the choice and identification of shoe lining materials, which is wrong.

2, view

The quality of the processing is identified by sewing thread and bonding seam.

See if there is a broken line and whether the upper stitch is neat and regular.

In particular, the bonding part of the adhesive shoe leather bottom should be glued and smoothed without any gap, and there is no indication of virtual sewing and glue opening.

3, touch the inner cavity of the shoe with your hands and see if there is a bumpy phenomenon inside and inside the shoe. Wherever you can touch your feet, you can't be uneven or your feet will blister.

The shoe must be provided with an insole, which is designed to keep the shoes clean, covering the rugged nails at the bottom and improving the touch of the feet.

4, use hand to pinch the heel part of the heel to see if it is stiff and elastic. It is necessary to follow the hard part of the heel without the groove mark. Under the ankle, the elasticity is good. It can not be perfect, or it will damage the ankle.

5. Press the inner bottom of the waist to see if the hard shoe's inner sole is the trunk and skeleton of the shoe, and press hard as the bottom of the body to keep it motionless.

The skeleton and trunk are not stiff.

Deformation must be deformed and damaged.

6, put your shoes on the table or glass panel at random, to see if the shoes are stable. When the shoes are placed on the table, they should stop immediately.

7. Use the middle finger tip to insert the front toe sole to see if the height of the front toe is appropriate. When the tip of the shoe tip is right enough to indicate the belly of the middle finger, it indicates that the front toe of the shoe tip is suitable.

When the front toe of the shoe tip is too large, the stability is reduced; the shoe toe is worn quickly before the foot is lifted, the shoe is easily deformed, and the foot is easy to fatigue.

8, hold your shoes with your hands to see if the shoe sole and heel contact is smooth, and the sole and heel are lightly on the side of the table (or counter) side, so that the side of the shoe is upwards, so as to see the contact parts of the sole.

with

(the sole is the widest) and the whole heel plane is in good contact with the side of the table.

Otherwise, shoes will be easy to deform and drop heels.

9, put the shoes on the table, look at the two directions from the front and rear directions to see if the alignment is from the front of the shoe to the back, and the size of the inside and outside edges of the sole should be raised from the top of the table.

From the heel of the shoe, check whether the heel is vertical or not, so that it does not tilt to the inside or outside.

10, with index finger erected on the side of the shallow shoes to help the outside, check the upper ankle height.

The tip of the index finger comes down to the bottom of the shoe, so that the index finger is closer to the upper part of the outer ankle, and the second finger knuckle line of the index finger is highly consistent with the upper arm of the outer ankle.

General life shoes, social etiquette shoes, fashion shoes, slightly lower than the index finger second finger knuckle line is good; low waist sports shoes and casual shoes are soft mouth structure, the external ankle height can slightly higher than the index finger second finger joint line.

{page_break}

11. Look down from upwards and downwards to see the symmetry of the shoe parts and the deformation of the shoe outline.

Taking the straight line between the tip of the shoe and the middle point of the heel as the symmetrical axis, see whether the components on the vamp are symmetrical or not.

The shoe outline should be folded in the shoe, smooth and round, and the twisted leaf should be twisted into inferior shoes.

12. Understand the performance of the sole of the shoe and choose the suitable outsole.

According to the main raw materials, it can be divided into rubber base, imitation leather base, plastic bottom and so on. Their properties are: Rubber soles are soft, elastic, skid resistant, wear resistant, heat-resistant and cold resistant. They only have a heavier texture. The imitation leather soles are light, stiff, wear-resistant and resistant to twists and turns, but with poor elasticity and less slip resistance. The plastic soles are wear-resistant and elastic, but the texture is hard, and the heat resistance and cold resistance are poor.

Single shoe matching

Many people are very fastidious about dressing, but they neglect the harmony of shoes and clothing color, which is harmful to the overall aesthetic feeling.

Usually, the color of shoes is much less than that of clothing. As long as you pay attention, choosing and matching shoes colors is easier.

1, elegant, implicit and solemn costumes, should choose black, white, gray, dark brown and other neutral colors of shoes as well.

2, the shoes of the red department are suitable for matching clothing with warm colors such as brown, orange and yellow.

3, dark blue shoes should be collocated with blue, green, purple and other cool colors.

4, when the color contrast between the upper and lower garments is large, the color of the shoes should not be too close to the color of the lower garment, so as to avoid a sense of separation from the top and bottom.

At this time, the color of shoes should be as close as possible to the color of the upper garment so as to maintain the reciprocal relationship between colors and achieve the goal of harmonization.

5, if the color of clothing is lighter, the color of shoes can be darker; the color of clothing is deeper, and shoes should be lighter.

If the dress is colourful, it should be accompanied by a pair of soft neutral colors.

6, the color contrast of socks and shoes should be larger, or the socks with pitional colors between shoes and bottoms will make shoes and clothing color more harmonious.

Single shoe maintenance

1. A pair of shoes is best worn once every other day.

Because the sweat will cause moisture in the shoes after wearing the shoes all day, so when you go home, you should dry your shoes in a cool ventilated place to prevent bacteria.

2, usually wear shoes, use shoes cloth or soft hair to wipe away the dust.

The position of the seam between the heel and the shoe can be cleaned with the pointed brush, and then put into the shoe support to prevent the leather from deforming.

If there is no shoe holder, you can put it in the newspaper instead.

3, if the shoes are wet, use the dry cloth to suck the moisture of the shoes, then put them in a cool and ventilated place and let the shoes dry naturally. Do not put the wet shoes in the sun, air them next to the cool air or blow dry with the ventilator, otherwise it will burst easily.

Never wash and contact chemical solvents when cleaning shoes.