• <abbr id="ck0wi"><source id="ck0wi"></source></abbr>
    <li id="ck0wi"></li>
  • <li id="ck0wi"><dl id="ck0wi"></dl></li><button id="ck0wi"><input id="ck0wi"></input></button>
  • <abbr id="ck0wi"></abbr>
  • <li id="ck0wi"><dl id="ck0wi"></dl></li>
  • Home >

    How To Adjust The Needle Jumping Problem Of Multi Needle Sewing Machine

    2012/9/18 16:36:00 63

    Multi Needle Sewing MachineJumping NeedleMachine Needle

      

    Multi needle sewing machine

    In the course of using, many problems are encountered. It is jumping needle. If frequent needle jumping happens, it will seriously affect the quality of products.



    First, threading should be correct. Incorrect thread fitting will cause needle jumping, disconnection and stitch incompatibility.

    On the premise that the traces are beautiful, the needle tension and bending needles should be kept at a minimum tension. The needle should be uo113gs 14# to 16#.


    (1) adjustment of bending needle and machine needle.


    Straight needle and bending needle should be inserted into the bottom of the needle holder at the top of the straight needle pin. The gap between the curved needle tip and the needle side should be kept between 0 and 0.1 millimeters. When the bending needle comes back to the end, the distance between the bending needle tip and the needle center line should be kept at 2.5 to 3 millimeters.

    The needle is raised from the bottom dead point and the needle is started to hook. When the curved needle tip coincides with the center line of the machine needle, the needle tip should be 1.5 to 2 millimeters above the pinhole.


    (2) adjustment of the lever.


    The dial bar should be kept up to the top. When the dial rod head moves to the center of the machine needle, the distance from the needle should be 0.5 mm.

    When the curved pin is hooked up

    Machine needle

    When the line is started, the dial bar must be carefully adjusted so that it can smoothly enter the wire loop of the bending needle and hook up the bending needle line. At the same time, the gap between the rod and the tip of the needle tip should be within 0.1 to 0.2 millimeters.


    (3) adjustment of machine needle and thread


    When the needle drops to the lower dead center, the eye of the needle bar crossing hook is aligned with the adjusting rod.

    If we hope that the machine needle ring is bigger, the products of the sewing machine, sewing machine, sewing machine and so on will emerge in an endless stream. The special machines such as keyhole, button, knot, pattern machine and suit bag can speed up the development; we should move the line adjustment lever upward, whereas the line adjustment bar will move downward.


    (4) Regulation of bending needles


    When using the chemical fiber line, the position of the bent needle hook can be adjusted up and down. There are many series of related products matching the light. Customers may buy a device, but they can not match the special process requirements with other equipment purchased later. Even after the purchase of the complete set of equipment, the distance between the crooked needle bar and the hook eye at the bottom is 7~8 millimeters.


    The above points

    Jump needle

    The adjustment method is for reference only, and should be solved in one or more ways according to the actual situation in maintenance.

    • Related reading

    How To Deal With The Trouble Of The Needle Checking Machine

    Equipment matching
    |
    2012/9/18 15:54:00
    17

    How To Disconnect The Embroidery Machine?

    Equipment matching
    |
    2012/9/18 15:18:00
    69

    Brief Analysis Of Differences Between Pen And Inkjet Plotters

    Equipment matching
    |
    2012/9/18 14:36:00
    15

    Intelligent Cutting Equipment Improves The Efficiency Of Garment Industry.

    Equipment matching
    |
    2012/9/18 11:19:00
    28

    Explanation Of Sewing Quality And Performance Of Electronic Flat Nose Keyhole Machine

    Equipment matching
    |
    2012/9/18 10:33:00
    20
    Read the next article

    Homogenization Of Business Philosophy Leads Enterprises Into Marketing Difficulties.

    Homogenization of business philosophy is the root cause of enterprises' being trapped in marketing difficulties. The establishment of a business concept based on organizational competence and the establishment of systematic organizational capabilities are fundamental to break through the marketing dilemma.

    主站蜘蛛池模板: 狠狠噜狠狠狠狠丁香五月| 日本xxx网站| 欧美成人在线观看| 日本三级电电影在线看| 国产综合久久久久鬼色| 又紧又大又爽精品一区二区| 亚洲中文字幕伊人久久无码 | 亚洲av无码专区在线播放| 一本一本久久a久久精品综合| 黑人极品videos精品欧美裸| 波多野结衣办公室33分钟| 成视频年人黄网站免费视频| 国产无套内射久久久国产| 亚洲精品99久久久久中文字幕| 中文字幕在线视频网| 国产人成精品香港三级古代| 欧美黑人疯狂性受xxxxx喷水| 成人毛片免费看| 国产国产成人久久精品杨幂| 亚洲在成人网在线看| assbbwbbwbbwbbwbw精品| 美女裸体a级毛片| 日韩一区在线视频| 国产福利免费视频| 亚洲综合在线视频| yy111111少妇影院无码| 综合久久久久久久综合网| 日本乱偷人妻中文字幕| 卡通动漫精品一区二区三区| av无码精品一区二区三区四区| 法国性经典xxxxhd| 在线播放国产视频| 免费高清av一区二区三区| 久久99国产精品久久99| 野花视频在线观看免费观看最新| 校园春色亚洲欧美| 国产精品第44页| 免费香蕉依人在线视频久| H无码精品3D动漫在线观看| 玩肥熟老妇BBW视频| 天天干天天射天天操|