Cotton Spinning Industry Has A Long Way To Go To Realize "NC Generation"

< p > the author visited some a target= "_blank" href= "http://www.91se91.com/" > textile "/a" enterprises, and they expressed their views on numerical control technology.

< /p >

< p > Shandong Lu Tai textile Limited by Share Ltd division manager Guo Heng: < /p >

< p > the degree of numerical control of Lu Tai textile is gradually deepening. We now have a set of one hundred thousand spindles cobweb system. Later, we will continue to introduce this system, and actively promote the process of numerical control.

Numerical control has brought many benefits to cotton spinning enterprises.

First of all, in terms of operation and management, it can strengthen the management of the production platform, ensure the supply of pre and post processes. Secondly, the use of numerical control can increase labor efficiency and increase the output per unit time; in addition, it can reduce the workload of employees.

For example, the original accounting is also needed for production classes to read the data one by one, and the statistics are now clear.

However, there are some difficulties in the process of NC implementation, such as some textile a target= "_blank" href= "http://www.91se91.com/" > clothing < /a > manufacturers do not open interface data from the perspective of business secrets, some old equipment is too old to have detection system.

All these require equipment manufacturers to continue to make efforts to make up for these problems as far as possible.

Of course, considering the cost of investment due to the need of numerical control, there is still a long way to go to realize the "CNC generation".

< /p >

< p class= "MsoNormal" style= "margin: 0cm 0cm 0pt" > span lang= "EN-US" lang= "Microsoft";

< p > Huang Jie, general manager of Jiangxi Jinxing Textile Co., Ltd.: < /p >

< p > Jinxing textile has started the road of numerical control since 2010. All the spider web systems of Swiss Lida have been introduced. The degree of numerical control can reach almost 100%.

After stepping into numerical control, we obviously feel the following progress: first, the stability of production and the quality of products have been significantly improved; second, the employment has been greatly reduced.

Nowadays, the average number of domestic ingots is 120 people, and after the realization of numerical control, we only need 30 people to work. It is expected that the number of workers will be reduced after all the devices are opened. Third, after automation, the automation level will be significantly improved, and the number of maintenance personnel and maintenance will be reduced. The most direct effect brought by digital control is < a href= "http://www.91se91.com/news/" > equipment < /a > automation level. Now domestic enterprises have been emphasizing pformation and upgrading, and must enter the "CNC generation" step by step.

I think we should start with three main aspects: first, we should strengthen the digestion and absorption of advanced equipment abroad and make it useful for us.

Second, cotton spinning equipment enterprises should pay more attention to improving their R & D capability.

Third, and most importantly, cotton textile equipment enterprises and cotton textile enterprises should strengthen cooperation between upstream and downstream.

The equipment enterprises do not understand the specific production process of cotton spinning enterprises, and cotton spinning enterprises are not familiar with the manufacturing links of the equipment. Only by strengthening communication between them can they create a closed door situation and break through the bottleneck of improving the equipment.

For example, we provide a good experimental environment for the relevant domestic enterprises. This advantage is comparable to that of a simulation laboratory in the equipment enterprise.

It is certain that NC will be an inevitable trend in the development of cotton spinning industry. However, at present, most of the middle and low-end cotton spinning enterprises are in China, and the condition of hardware equipment is uneven. There may be polarization in the development due to the limitations of capital or technology. The advent of the "CNC generation" will take a long time.

Therefore, if we want to achieve this idea at an early date, we need the support of the government and the wisdom of entrepreneurs, and we need the cooperation between the upstream and downstream of the cotton spinning industry.

< /p >

< p > < strong > reporter observed: "NC generation" has a long way to go. < /strong > /p >

< p > the "CNC generation" equipment innovation project is the popularization and application of digital technology on all kinds of equipment, the integration and innovation of a number of numerical control equipment, and the upgrading and upgrading of equipment performance and even fundamental changes, thus promoting the pformation and upgrading of the equipment manufacturing industry.

For textile equipment, from the "electrical age" completely into the "NC generation", it will faster and more vigorously promote the upgrading of China's textile industry.

As far as the current situation is concerned, cotton spinning equipment has the most "qualification" to achieve numerical control.

According to the interview, NC management has brought visible benefits to the whole chain of cotton spinning enterprises. The managers of cotton spinning enterprises are full of hope for the coming of this era, and are pushing the work with the greatest efforts.

The "CNC generation" has brought digital control from the technical level to the economic and social development level. The realization of the industry blueprint of "NC generation" is full of temptation for any industry leader.

Of course, when we cool our enthusiasm for this imagination, we need to be sensible about its arrival.

Whether for a cotton spinning enterprise or for the whole < a href= "http://www.91se91.com/news/index_c.asp" > cotton textile industry < /a >, the problems of high cost investment, hardware level restriction, < a href= "http://www.91se91.com" > spinning enterprise < /a > upstream and downstream cooperation and so on, these big problems of small business management to equipment port are all placed in front of the realization of the "CNC generation".

To achieve the "NC generation", the cotton textile industry is the leader. If it can be successfully promoted, it will undoubtedly become a model of other fields in the textile industry.

Therefore, from the point to the surface of the textile industry, we need to walk steadily and steadily.

< /p >