Introduction To Fabric Knowledge Of Bass Yarn And Hemp

< p > > a href= "http://www.91se91.com/news/" > strong > crepe fabric > /strong > /a > strong > Introduction < /strong > /p >

According to the principle of forming bubbles, P is mainly divided into woven foam, alkali shrink crepe and so on.

< /p >

< p > the raw material of the woven crepe yarn is pure cotton or polyester / cotton yarn. The density of the warp yarn is larger than that of the ground, or the yarn is made of single yarn.

During weaving, the amount of warp delivery is greater than that of the ground, and then the beautiful and uneven bubbles are formed through dyeing and finishing.

The bubble fastness of the bubble yarn is better.

Alkali shrinkage crepe is the principle of increasing the diameter and shortening the length of cotton fiber in the presence of strong alkali liquor.

< /p >

< p > alkali shrinkage crepe is a pure cotton fine plain plain fabric that will be dyed or printed. According to the design requirements, the liquid will be printed on the surface of the fabric, so that the surface of the fabric will be formed with lye and alkali free parts. There will be some shrinkage on the surface of the fabric and no shrinkage of the cloth will be formed.

The foam fastness of alkali shrink crepe is not good, and the fastness of bubble is improved after finishing with resin.

In addition, two kinds of fibers with different shrinkage properties can be spun into yarns, arranged at intervals. After weaving, dyeing and finishing, due to different shrinkage of yarns, the cloth surface forms uneven bubbles.

The bubble fastness of this type of bubble yarn is good.

< /p >

< p > according to printing and dyeing methods, it is divided into dyeing crepe, printed bubble yarn and yarn dyed crepe.

The foam is mainly used for women, children's summer dress, and bedclothes, curtains and other decorative items.

When washing the bubbles, it is not advisable to use hot water bubbles, nor is it suitable for rubbing and twisting vigorously. No ironing is necessary after washing, so as to avoid affecting the fastness of bubbles.

< /p >

< p > < strong > hemp > /strong > a href= "http://www.91se91.com/news/index_c.asp" > strong > fabric > /strong > /a > strong.

< p > hemp < a target= "_blank" href= "http://www.91se91.com/" > dress < /a > "/p".

< p > hemp clothing is suitable for straight line or contour line in structure. Because of its poor draping performance, it should avoid using pleat or making open skirt, otherwise it will give people a bloated impression.

Because of the poor elasticity of linen fabric, it is not suitable for tight or heavy structure design.

The shrinkage of hemp fabric is large (similar to that of printed cotton cloth), and it needs to be soaked and pre contracted before cutting. The temperature is relatively high (180 - 200 degrees Celsius).

For linen fabrics with thick stripes on the surface, the trimming should be aligned to make them symmetrical and beautiful. The breaking strength of flax fibers is high. They should be sewed with long and sharp stitches and fastened sutures.

Linen fabric has poor wrinkle resistance and abrasion resistance. It is easy to wear at the crevice. It can be decorated with open and double lines to increase the area of wear.

< /p >

< p > wear of hemp clothing < /p >

< p > the key points for wearing the hemp clothing are not too long to wear, and should be washed frequently.

In summer, clothes that are closely dressed, if not frequently changed, will easily cause the fabric to be yellow and difficult to wash.

Frequent washing can overcome the fatigue of linen fabric and extend the life of < a target= "_blank" href= "http://www.91se91.com/ > > clothes > /a > easily worn parts.

Secondly, it is best not to wear a woven linen garment to sit and rest at will, because the linen fabric is easy to crease, especially the wrinkle after heavy pressure is not easy to recover, affecting the appearance.

< /p >

< p > wash clothes of bast garments < /p >

< p > the washing requirements of bast fabrics are basically the same as those of cotton fabrics, but the soaking time should not be too long.

Also because the hemp fibers are generally rigid and have poor cohesion, they should be lightly rubbed. They should not be rubbed vigorously on the washboard. Avoid using hard brushes to avoid fuzzing. Ramie clothing needs special attention. Otherwise, it will feel itchy after wearing it again.

After rinsing, it can not be squeezed or dehydrated vigorously to prevent a href= "http://www.91se91.com" > hemp fiber > /a > slip, which will affect appearance and wear resistance.

When you are in the sun, you should stretch the collar and seams of the clothes to cool the sun, but not in the sun or too long to prevent fading.

The stain on linen fabric is also the same as cotton fabric. But if there is a slight cigarette burn on linen fabric, wipe it with a slice of lemon and then put it in the sun for a while.

< /p >

< p > the collection of hemp clothing < /p >

< p > the collection of hemp clothing can be folded and stored, but it must be folded and smoothed. The creases should have rules. It is best to fold the original creases according to the commodity package.

If it is a linen suit and other clothes, it should be hung in the wardrobe with hangers to keep the garments neat.

If long-term storage of hemp clothing, the wardrobe must be dry, to prevent moisture absorption of bast garments damp and mildew.

< /p >