• <abbr id="ck0wi"><source id="ck0wi"></source></abbr>
    <li id="ck0wi"></li>
  • <li id="ck0wi"><dl id="ck0wi"></dl></li><button id="ck0wi"><input id="ck0wi"></input></button>
  • <abbr id="ck0wi"></abbr>
  • <li id="ck0wi"><dl id="ck0wi"></dl></li>
  • Home >

    Troubleshooting And Influencing Factors In Bronzing

    2013/4/27 21:28:00 38

    Garment AccessoriesBronzingHot StampingGold Foil

    1. no hot stamping. Hot stamping Untrue


    This is related to many factors such as the surface characteristics, the properties of anodized aluminum, the temperature and pressure of stamping. 1, there are too many powder sprayed on the surface of the printing piece, or the surface contains additives such as tackifier and glossy paste, which will impede the adsorption of aluminum and paper. Solution: surface powder treatment or in printing process. 2. Improper selection of anodized aluminum directly affects the fastness of bronzing. According to the size of the gold stamping area, the type of electrified aluminium should be chosen comprehensively considering the characteristics of the hot stamping material. 3, do not correctly grasp the matching between bronzing equipment and pressing time and stamping temperature, affect the printing fastness and clarity of image and outline. Because of different equipment, hot stamping material, pressing time and hot stamping temperature are different. For example, the high speed circular press is fast and the contact temperature of the stamping line is higher than that of the flat or flat press. Under normal circumstances, the circular stamping temperature is between 190 and 220 degrees, and the flattening is about 130 to 150 degrees. The flatness is about 100 to 120 degrees. Of course, the pressing time, the stamping temperature and the production efficiency are also largely restricted by the transfer performance of electrified aluminum.


    2. anti pulling


       Backward pull It means that after electrification, the electrified aluminum will pull away the printing ink or printing varnish. The main reason is that the ink on the surface of the printing product is not dried or the surface of the printing product is not processed properly after UV, which results in the inability of printing ink and UV oil to bond with the surface of the paper. Solution: hot stamping after printing. In addition, anodized aluminum with low separation power and excellent thermal transfer can be selected.


    3. paste and hot stamping after electrified aluminum discoloration.


    Paste plate is mainly due to poor stamping, poor installation of anodized aluminum or aluminum foil incorrect. After hot stamping, the discoloration of electrified aluminium is mainly caused by high temperature of hot stamping. In addition, the crinkle of electrified aluminium is easy to cause hot stamping and uneven color change. It can be solved by lowering the temperature appropriately. For circular press type, fan can be installed at the foil feeding place to keep the foil floating, and avoid burning aluminum before touching the foil.


    4. improper process arrangement destroys the gloss on the surface of anodized aluminum.


    Plastic film mulching Gilding People often worry. Gold foil It is easy to wipe off and then hot stamping and then laminating. This is easy to cause: (1) film (especially matte film) will destroy the gloss of the surface of anodized aluminum, and it is not suitable to use water-soluble glue film, otherwise it will cause blackening on the surface of the audio-chemical aluminum, and at the same time, it will easily cause the gold powder to stick to the edges of the picture and make the hair void. 2. After stamping, it is depressed due to pressure, and glue is not easy to permeate the surface of anodized aluminum. It is easy to separate the OPP from the paper and affect the quality of the product. The correct process is to first film and then hot stamping, and choose OPP compatible aluminum. In short, there are many factors that affect the quality of bronzing. Making high quality bronzing plates and correctly controlling the gilding are the key to improve the quality of bronzing.

    • Related reading

    Fabric Bronzing Technology For Garment Accessories Knowledge

    science and technology culture
    |
    2013/4/27 21:22:00
    71

    Classification And Use Of Clothing Materials

    science and technology culture
    |
    2013/4/27 20:59:00
    27

    The Influence Of Four Factors On The Material Collection Efficiency Of Bag Opening Machine

    science and technology culture
    |
    2013/4/26 21:32:00
    44

    Hibo Technology Highlights: Natural Decomposition Of Buttons, Hi-Tech Fibers Emerge In Endlessly.

    science and technology culture
    |
    2013/4/19 14:44:00
    57

    What Is The Basic Knowledge Of Garment Accessories?

    science and technology culture
    |
    2013/4/18 23:56:00
    33
    Read the next article

    April Is Not Afraid Of Spring, Morning And Evening Temperature Difference.

    Fashion affects your life quietly everyday. In the early morning, when you stand in front of the orderly wardrobe, the fashion will be around you from the light chiffon shirt, the smoked smokes, the colorful half skirts with lotus leaves and the women's beloved high heels. Next, let's take a look at the fashion mix this season.

    主站蜘蛛池模板: 麻豆视频一区二区三区| 亚洲人成在线观看| china同性基友gay勾外卖| 精品人妻人人做人人爽夜夜爽| 护士的诱惑电影| 四虎8848精品永久在线观看| 丰满多毛的陰户视频| 色伦专区97中文字幕| 无毒不卡在线观看| 古代肉多荤话文高h| 伊人免费在线观看| japanese日本护士xxxx18一19 | 狠狠久久永久免费观看| 天天综合色天天综合| 亚洲综合久久精品无码色欲| 99久久精品九九亚洲精品| 欧美激情亚洲色图| 国产精品久久久精品三级| 亚洲AV无码成人专区| 风间由美性色一区二区三区| 日本大片免a费观看视频| 国产xxxxx在线观看| 一级毛片恃级毛片直播| 男女抽搐一进一出无遮挡| 国内精品久久久久久影院| 亚洲国产成人久久| 99久久国产视频| 欧美日韩中文国产va另类| 国产激情精品一区二区三区| 久久国产精品偷| 美女张开腿让男人桶国产| 天天躁夜夜躁狠狠躁2021| 亚洲成AV人综合在线观看| 亚洲五月六月丁香激情| 欧美日韩三级在线观看| 国产成人精品免费视频大全| 久久久久久久99精品免费观看 | 一卡2卡3卡4卡免费高清| 特黄aaaaaaaaa及毛片| 国产精品久久精品视| 久久亚洲国产精品五月天婷|