Textile Worker: Hard Work In High Temperature Workshop

< p > when talking about high temperature operation, many people first think of outdoor workers, cleaners, water supply workers, traffic policemen and so on.

As we all know, some indoor jobs are more difficult than outdoor work. Workers should engage in production operations in a sultry environment, such as < a href= "http://www.91se91.com/news/index_h.asp" > textile workers < /a >.

The temperature in the textile workshop is generally higher than 2 degrees above the outdoor level. The temperature of some heat dissipating machines is even higher than the outdoor temperature above 10 degrees Celsius. Moreover, because the working environment is relatively closed, in the hot season, it is like washing sauna in the workshop.

< /p >

< p > < strong > high temperature experience: enter the workshop for 10 minutes, then sweat. < /strong > /p >

< p > 8 a.m., the reporter came to the Zhejiang Lan Bao wool Group Co., Ltd., located at the intersection of Spinning Factory Road and Nanxi West Road.

After entering the dyeing and finishing workshop, the first thing that comes to the eye is a huge machine that makes a rumble of thunder, which makes people feel that the whole ground is shaking with it.

The hands of the textile workers were flying upside down, and the production line was busy.

< /p >

< p > > a href= "http://www.91se91.com/news/index_c.asp" > dyeing and finishing workshop < /a > divided into two sections: dry and wet. Relatively speaking, because of the need to use steam equipment in the wet section, the temperature will be higher, and the environment and conditions for workers will be more difficult.

< /p >

< p > beside the drying machine, the reporter saw Yang Xiufang, a drying worker who was working. She wore a white work cap and a cotton work uniform, and focused on the machine's hair.

Just after the water is removed, the wool passes through her hands, and the floor is laid on the conveyor for drying.

The noisy machine made a harsh noise, and Yang Xiufang had obviously adapted to the environment, unmoved, staring at the hair on the machine.

< /p >

< p > dryer is steam, and the whole machine continues to emit heat, which makes the enclosed environment more sultry.

After standing for only 10 minutes, the reporter felt the temperature of the wet section. He began to sweat on his forehead, and he felt the sweat drop on his back.

"The temperature around our dryer is around 55 degrees Celsius, and the conditions are rather difficult, so we have more high temperature subsidies than other jobs."

Yang Xiufang told reporters.

< /p >

< p > {page_break} < /p >

< p > despite the hot weather, some of the workmen in the workshop are still wearing long trousers.

After hearing, I knew that the workers worked in the workshop for a long time. The sweat on their bodies would stick to the hairs in the air, causing skin itching and even allergies.

< /p >

< p > "because we are afraid that our hair will be entangled in the machine, so we have to put our hair up and put on the hat when we go to work.

Slippers can't be worn in the workshop. "

Yang Xiufang said.

< /p >

< p > < strong > workers' voice: no matter which post should do well, screw < /strong > /p >

Yin Huifang, 50 years old, started working in dyeing and finishing workshop in 1979. From the then skilled worker to today's workshop director, Yin Huifang quietly dedicated more than 30 spring and autumn years in this workshop.

"In the past, our workshop was also responsible for dyeing, and steam was used as steam engines, so the temperature was particularly high, when the conditions were poor. We all used the basin to put ice on the machine to cool down."

Yin Huifang said.

< /p >

The director briefed the reporters on the general process of fine spinning of woollen fabrics: in the dry finishing section, the coarse woolen fabric was removed through the "quantity" to remove the defects on the cloth surface, followed by the repair of the needles, the needles were stitched and stitched into the needles, then the edges were sewn; the woolen cloth would enter the wet finishing section, and the suede was pulled out through the shrink machine to wash, dehydrate and dry. Then the woollen cloth entered the drying section again and carried out the "intermediate inspection". At that time, the woolen cloth was already half finished, and then formed a smooth, fine woven wool through the repair, fuzzing, shearing and steaming. < p > Yin

< /p >

< p > because the noise in the workshop is very big, communication must rely on roaring, busy work and can not attend to drinking water, plus the flying catkins in the air often fly into the throat, in the textile industry for a long time, some workers' voice has become hoarse.

< /p >

< p > "now our workshop conditions are much better. Every machine is equipped with electric fans, but there are so many machines emitting heat continuously, so the average temperature of the workshop is still around 40 degrees."

Yin Huifang said, "especially in the afternoon and afternoon, the workshop will be even hotter, like a sauna."

< /p >

< p > because it is necessary to catch up with the production of finished woolen fabrics before the fall and winter season. Therefore, from July to September, it is the busiest time for the "a href=" http://www.91se91.com/news/index_f.asp "textile workshop" /a, which is the highest temperature season in Jiaxing.

Yin Huifang told reporters that during the hottest days in summer, the workshop will prepare workers to cool down their products such as soda and cold drinks.

"Sometimes it's really hard to get hot, so we can get wet towels occasionally to wipe sweat. Actually, after working for so many years, we used to be used to high temperature, but no matter which post we are, we should do well in screws and do our work well."

< /p >