• <abbr id="ck0wi"><source id="ck0wi"></source></abbr>
    <li id="ck0wi"></li>
  • <li id="ck0wi"><dl id="ck0wi"></dl></li><button id="ck0wi"><input id="ck0wi"></input></button>
  • <abbr id="ck0wi"></abbr>
  • <li id="ck0wi"><dl id="ck0wi"></dl></li>
  • Home >

    Computer Color Matching Can Improve The Efficiency Of Printing And Proofing.

    2014/1/7 20:24:00 38

    ComputerColor MatchingPrinting And Proofing

    < p > computer color matching system consists of two parts: software system and hardware system. Among them, the software system is software for color matching and color matching system. The theory of Kubelka-Munk is based on optical theory, which can modify the coloring of single fabric and blended fabric, establish and manage the color formula library, control the quality of production, and can intelligently adjust the formula to compensate for the interaction between the dyestuffs and dyestuffs.

    The hardware system is a spectrophotometer, and its basic components are light source, separate monochromatic light and photoelectric detector.

    < /p >


    < p > the working principle of measuring and matching is that the white light emitted by the light source is irradiated on the sample, and the reflected light is separated by three prisms or diffraction gratings, and then the reflectivity of various wavelengths is calculated. The computer color matching system calculates the chromatic value or the coordinates of the three degree color space with this reflectivity, and then calculates.

    < /p >


    < p > in this process, first of all, the basic database of dye calibration should be established, and the chromatic environment parameters of the formula should be set up. (color matching and the evaluation of light source, spectral range and wavelength interval, CIE standard color system, dyeing process, dye combination mode and color difference tolerance of dye formula), then the standard color sample will be measured, and the dye formula will be predicted and calculated.

    In general, the formula obtained by the computer color matching system can only be corrected 1~2 times.

    < /p >


    < p > < strong > making recipe file < /strong > < /p >.


    < p > each base cloth should be taken from the production of a href= "http://www.91se91.com/news/index_c.asp" > dyed cloth < /a >. Some of them will be stored in the computer after being directly measured, and the other part will be used for making the basic samples.

    The fabric with the same texture and the same structure and the same structure should be treated as different kinds of fabrics.

    The dye samples for making basic samples should be as many as possible, so that when matching colors, several formulations that meet the requirements can be obtained from various dyestuffs of different hue, and the choice is large, so that satisfactory results can be obtained.

    In order to ensure the accuracy of color matching, dye batting tests should be done when dyes with different batch numbers are changed.

    Each dye should be dyed into 8 basic samples with different concentrations (for fabric weight).

    The range of dyeing concentration and the grade of concentration should be determined according to the actual situation.

    < /p >


    < p > in the production of samples, attention should also be paid to the specimen being made by the same person to ensure consistency.

    The dyes for making a set of basic samples can not be divided into 8 times. A certain amount of dyestuff should be dyed at a time to form the dye solution. The dye solution should be diluted according to the concentration of the dye solution to obtain different concentration of dye solution.

    The production conditions of the basic samples should be simulated as far as possible.

    The pH value of bath, the type and dosage of auxiliaries, time, temperature, bath ratio and post treatment conditions should be the same as that of mass production.

    For blended fabrics or yarns, the basic samples of dyeing and staining should also be obtained according to the one bath or two bath method used in bulk sample production.

    To do this, chemical methods should be used to strip off a component from the raw material and obtain two kinds of single component fabrics for making dyed and stained samples.

    < /p >


    < p > before the storage of basic data, the basic samples must be measured.

    The basic sample generally has the following principles: as far as possible, choose the large diameter hole; the surface uneven or coarser fabric should be measured more, and the average value should be taken; the surface of a set of samples should be consistent with the direction of the grain; if it is a yarn sample, it should be wrapped around the frame in advance, and the density is uniform and the number of layers is the same. It is best to wrap 4 layers. If it is woven into cloth, the result will be more accurate. The samples of pile and blankets are added to a hole of quartz glass before the test, and the sample is pressed against the outside of the glass. Determination

    < /p >


    < p > when using computer color measuring system to measure colors, first of all, the computer and color tester should be set and standardized unified parameters, such as D65 light source, 100 field of view, or SCE, CMC L/C=2/0.5 or 2/l, etc.

    Before measuring colors, black and white plates should be used to calibrate colorimeter and computer. The measured objects must be kept smooth and certain tension in the coloring hole; attention should be paid to the organization of the tested objects, the difference between the positive and negative sides, and the influence of twill and fuzzing surface; attention must be paid to the uniform condition of dyeing; if the dyeing is not leveled, it must be redone; the color sample cloth should be rotated at different angles, and the directional color should be measured.

    < /p >


    < p > < strong > mastering < a href= > http://www.91se91.com/news/index_c.asp > color matching < /a > key points < /strong > /p >


    < p > when the color difference is large, it is possible to color the system as much as possible.

    Generally, after adjusting the formula through computer, if the system is pferred out of the system due to chromatically changing factors, it can not synchronize with the vision. At this time, the color concentration is very small.

    When the spectroscopic curve does not match (color change phenomenon), if the color is close, we should pay attention to whether the system adjusts the hue and vision synchronously. If it is not synchronized, it must be adjusted by visual color matching to avoid wasting color timeliness.

    < /p >


    < p > direct dyeing must be made by computer. The reflectance curve can be used to confirm that the dye can be dyed without color change.

    Pay attention to the difference between the standard sample and the surface morphology of the sample, so as to make proper concentration adjustment in advance (the smoother and brightening the surface, the lighter the color matching formula).

    The dyes should belong to the same category, which is conducive to dyeing with one method.

    Even if the same type of dyestuff is used, the dyeing properties (such as dyeing rate and color fastness) should be similar, otherwise the dyeing will not be consistent, the reproducibility will be poor or the color change will be different after wearing because of the change of dyeing conditions.

    The same type of dyes should be used for dyeing and dyeing. The amount of dyestuff should not be too large. The amount of dyes should be as few as possible to facilitate the control of shade.

    < /p >


    < p > generally, it should not exceed 3 a href= "http://www.91se91.com/news/index_c.asp" > dye > /a >.

    The combination of two dyes is also related to the color of the dye. For example, green light yellow (disperse yellow SE-2C) is combined with red light blue (disperse blue SE-2R), the green color is dark and dark, and it matches with pure blue (disperse turquoise blue H-G and disperse blue 2BLN).

    When using the basic data system (CCM) to match colors, it is best to use different material correction to avoid the difference of the color concentration predicted by the formula.

    When the system has color library data, it is necessary to use the color system matching as far as possible. A color library system with appropriate color stock and good rules (CCS) can greatly enhance the efficiency of color matching.

    After dyeing, the cloth should be dried and cooled before judging the color.

    < /p >


    < p > there are still some shortcomings in computer color matching. For example, in the process of computer color matching, there are many factors that affect the accuracy of color matching. In practical application, the main influencing factors include dyeing process control, dye strength, pretreatment of dyed gray cloth, color measurement layer of fabric, dyeing performance of fabric, weighing error and so on. Therefore, these factors must be strictly controlled.

    The color matching of computer depends on the number of dyes in the database, so there are some limitations. The solution is to increase the color of the building to reduce the limitation.

    < /p >


    < p > color matching technology as a key emerging technology in the printing and dyeing industry, has realized the color data pfer confirmation and colorless proofing between printing and dyeing enterprises and customers, effectively raised the reaction speed, effectively controlled the chromatic aberration, and fundamentally improved the efficiency of the entire printing and dyeing enterprise, and it will become the leading factor in the printing and dyeing industry.

    < /p >

    • Related reading

    Central Bank Governor China Needs Clothing And Other Imported Goods.

    Latest topics
    |
    2014/1/7 19:28:00
    37

    Textile Industry Strategy New Policy Pformation

    Latest topics
    |
    2014/1/6 17:28:00
    68

    Online Shopping Regret Right Will Implement The Urgent Change Of Electricity Supplier Replacement Policy

    Latest topics
    |
    2014/1/6 17:26:00
    32

    "New Consumer Law" Is About To Implement Some Electricity Suppliers Ahead Of Schedule

    Latest topics
    |
    2014/1/4 21:18:00
    58

    二胎政策促進童鞋市場發展

    Latest topics
    |
    2014/1/1 22:22:00
    237
    Read the next article

    Cotton Temporary Storage System Will Be Closed In 2014.

    The cotton temporary storage and storage system, which has lasted for three years, will be closed in 2014. Xinjiang cotton enterprises insiders have also received relevant information about the state or subsidize Xinjiang cotton farmers, stop purchasing and storage, and liberate the cotton market. Yang Hongwen also has some concerns that if the subsidy is made in Xinjiang and the mainland does not subsidize or partial subsidies, the cotton planting area in the mainland will definitely continue t

    主站蜘蛛池模板: 亚在线观看免费视频入口| 日本高清www无色夜在| 国产麻豆一精品一aV一免费| 伊人久久大香线蕉无码| a毛片a毛片a视频| 激情综合色五月六月婷婷| 国语自产偷拍精品视频偷| 亚洲欧洲视频在线观看| 三个黑人上我一个经过| 精品国产一区二区三区无码| 日本人的色道www免费一区| 国产呦系列免费| 亚洲aⅴ男人的天堂在线观看| 久久久久久久影院| 日本精品一区二区三区视频| 国产乡下三级全黄三级| 久久青草免费91线频观看不卡| 香蕉久久ac一区二区三区| 日本一卡二卡≡卡四卡精品| 国产一区美女视频| 一本久道中文无码字幕av| 热re99久久国产精品| 国产精品哟哟视频| 久久精品国产精品亚洲艾| 色丁香在线观看| 夫妇交换性3中文字幕k8| 亚洲欧美日韩在线不卡| 天天在线天天综合网色| 欧美大胆a级视频免费| 在线成人播放毛片| 亚洲另类古典武侠| 黄色一级毛片看一级毛片| 欧美91精品久久久久网免费| 国产人妖一区二区| 丁香花高清在线观看完整版| 激情伊人五月天久久综合| 国产精品va无码二区| 久久久久久人妻无码| 男生和女生打扑克差差差app| 国产自产2023最新麻豆| 久久精品人人做人人爽电影蜜月|