Lin Zi Affairs: Domestic Testing Instruments Need To Shorten The "Three Big Gaps"

< p > at present, the research and development of foreign high-end textile testing instruments has been developing steadily, and the gap of domestic testing instruments is obvious. For example, when the USTER@QUANTUM testing system is used, it can reduce the yarn quality exceeding the limit of the original 4.5% spindle length of the long spinning truck to 0.3%, which is 93% lower than that of the original defective spindle position. China's research and development in this field is still in its infancy. The main reasons for these differences are mainly in three aspects: R & D ideas and models (Organization Technology), R & D investment, and the diffusion of R & D achievements. < /p >
< p > "our new a href=" http://www.91se91.com/news/index_c.asp "> R & D project < /a > is indeed market-oriented and user oriented, but the result is always slow, and there is a gap in keeping pace with the times. This is the experience of a R & D personnel of a color separation tester in the industry. The foreign counterparts' views and suggestions for improvement of the previous generation products are regarded as treasures. Each of these information is analyzed and studied one by one. Combined with the latest related technologies (especially digital technology), an improvement plan is put forward one by one. After optimization, the prototype is then developed and sent to the affected user enterprises for trial free of charge, and a trial technology confidentiality agreement is concluded with the users to realize the R & D side and the user Fang Shuangying. < /p >
< p > users also put forward suggestions for modification from a technical point of view according to the effect of on-the-spot trial. They also report to the association's new product promotion organization, finalize the model, put it into production and put it on the market. < /p >
< p > this kind of R & D mode can often be fired. There are still defects in the organization technology of our R & D mode. The list of 33 enterprises in the two batch of "China Textile machinery product R & D center" so far has not been released by a href= "http://www.91se91.com/news/index_c.asp" > textile testing instrument < /a > R & D enterprises. The research and development of the industry lacks the top-level guidance and design of the country, leading to the lack of guidance in research and development direction, the decentralization of financial resources and manpower, and unable to form a joint effort to create a strong boat and break waves, and develop the internationally famous high-end instruments. Obviously, it is urgent to set up a national textile testing instrument product R & D center as soon as possible. < /p >
< p > < a href= "http://www.91se91.com/news/index_c.asp > > weaving test instrument < /a > the gap of R & D investment. Textile testing product R & D technology is the collection and concentration of all kinds of textile machinery technology, covering all textile machinery products. Compared with the textile mainframe, although its size is small and its materials are few, its R & D investment is sometimes more than that of the mainframe. The famous Japanese SHIMADZU (test instrument manufacturer) has developed a variety of gas and media testing products at large cost to build wind tunnels similar to aircraft testing, which has made a breakthrough in R & D and achieved fruitful results. < /p >
< p > only after giving up can we get it later. Everyone knows about such a big border, but most of the enterprises in China are often reluctant to invest in R & D. They are often forbidden to "get first, then be willing". This is the answer of an enterprise manager when asked about the risk of R & D investment. There are few entrepreneurs who are willing to take risks and invest in research and development. Is this the cause of the gap? < /p >
< p > the gap between the diffusion of R & D achievements and the operation mode of popularization and application. The above realization of foreign R & D parties and users Fang Shuangying and the promotion and application mode also enlighten us: the diffusion and popularization of R & D achievements are the forerunner of new test products going to the market, and also an important means to transform products into commodities. Because products are not equal to commodities, they can be turned into commodities if they are sold and accepted. There are many achievements in the research and development of textile testing products in China, but there is a lack of scientific operation methods and mechanisms for diffusion and popularization. < /p >
< p > the project of "data acquisition and monitoring integration system for cotton spinning air-jet looms" jointly developed by Tianjin University of Technology and other two units was approved by the experts of the Tianjin science and Technology Commission in March 2008. Through parallel technology and concurrent program design, the monitoring system has high responsiveness and large throughput. It can monitor thousands of looms at the same time. It has many functions such as real-time monitoring, data processing, information inquiry, report generation and so on. It has reached the international advanced level, and has played a significant role in improving the product quality and economic benefits of the enterprises. However, most enterprises in the industry do not know that the new technology achievements can not be converted into productive forces. < /p >
< p > this is just like "car goods". On the one hand, there are a lot of empty cars every day. On the other hand, there are many goods without cars. This phenomenon requires the government, society, industry associations and enterprises to hand in hand, cooperate with each other, earnestly study and deal with it, and do well in the application and dissemination of R & D results. < /p >