The Basic Salary Of Textile Enterprises Is 3000 Yuan.

< p > the Swiss Gao Tao Bill company imported from the company produces DELTA-100 type fully automatic warping machine. It can be worn to tens of thousands of warps within 8 hours, and its efficiency is 10 times more than that of manual wear. This greatly alleviates the current shortage of human resources in enterprises.

< /p >

Since last year, many textile and garment enterprises in Quanzhou have actively introduced international leading textile machinery to cope with many unfavorable factors such as RMB appreciation, labor shortage, rising cost and high international trade barriers.

These production facilities are more automated, more stable in production performance, higher in product level, product quality and added value.

According to the Quanzhou inspection and Quarantine Bureau, in the first two months of this year, the Bureau has inspected and supervised 22 batches of international advanced imported textile equipment and 34 million 100 thousand US dollars, representing an increase of 69.2% and 283% respectively, indicating that Quanzhou's textile and garment industry is accelerating the layout of industrial upgrading by means of machinery and equipment.

< /p >

< p > < strong > quality stable equipment self checking ability improved < /strong > < /p >

< p > in the new workshop of Fujian Longfeng Textile Science and Technology Industrial Co., Ltd., located in Shen Hu Town, Jinjiang, this year, more than 600 imported ZW408 of Tianjin Tian Ju water jet loom, which has just imported from Japan, has been put into operation in half a month.

< /p >

In the spinning workshop on the first floor of P, the 13086 weft threads of the loom are weaving through water and weaving weft and weft.

If it is a common packaging fabric, a loom with a width of 1.8 meters can produce nearly 700 meters per day.

On the other hand, a woman worker is holding a flashlight to check the fabric of each loom slowly spitting out to see if there are any defects.

In fact, her work is not too complicated.

Because even if there is only one broken line in more than ten thousand wires, it will be induced by the built-in optical fiber of the loom, and the equipment will be automatically shut down for maintenance.

Therefore, the residual rate of finished products is also lower.

< /p >

< p > in fact, many traditional manufacturing industries including dyeing and finishing industry have speeded up the upgrading process.

According to the Quanzhou inspection and Quarantine Bureau, Shishi xinxianghua dyeing and finishing Development Co., Ltd. also introduced the Taiwan high temperature dyeing machine this year.

This highly efficient batch dyeing equipment can reduce the tension of fabric dyeing, apply to the dyeing of many kinds of synthetic fabric, and also apply to the dyeing of natural fiber fabrics.

At the same time, according to the different kinds of fabrics can be replaced with different specifications of nozzle, the highest speed of cloth roller reaches 350 meters / minute.

< /p >

< p > < strong > save manpower 1 people to dry hundreds of looms < /strong > < /p >

Liu Dongfang, director of Longfeng textile new factory, told the reporter that the new equipment is the most mature water jet loom in the world, and the operation is more simple. "Like this, round trip inspection, each worker can take care of 100 machines on average," P said.

Speaking of this, Liu Dongfang has no choice but to say, "now the wage of the assembly line workers has been opened to 3000 yuan / month, and the average wage of the general workers has reached 5000 yuan / month in the busy season.

< /p >

< p > the front-line workers recruitment situation is not very optimistic. A manufacturing person told reporters that the labor production cost of Quanzhou's productive enterprises increased by an average of 20% to 30% per year, and the pressure on production and operation of enterprises was getting bigger and bigger. Most of the powerful enterprises were able to alleviate the contradiction by reducing the dependence of production links on manpower.

< /p >

< p > 2013, the Quanzhou inspection and Quarantine Bureau has inspected and supervised various imported textile equipment for 95 batches and 77 million 980 thousand US dollars, up 216% and 117% respectively, which are mostly advanced equipment in the world, including air-jet looms, warp knitting machines, dyeing machines and other textile equipment and textile machinery parts, mainly from Germany, Switzerland, Italy, Japan and other countries and Taiwan.

From 1 to February this year, the value of the equipment imported from Longfeng textile has reached US $2 million 940 thousand.

"The new equipment has more stable performance and longer running time. It only needs 50% manpower of the last batch of equipment, which greatly relieves the recruitment problem."

Liu Dongfang added.

< /p >

< p > < strong > intelligent production efficiency increases linearly > /strong > < /p >

< p > in the workshop of the two floor of the new factory of Dragon Peak, the reporter saw a microcomputer storage storehouse used to connect different floors and different workshops, which was not available in the old factory buildings.

In the past, the pan heads with different specifications were pported to the weaving workshop by manpower trolley. The workers need to spend a certain amount of time to find the corresponding specifications from a large number of heads.

With this temporary storage, we only need to input data at the operation terminal to inform the process workers, and the corresponding disk heads can accurately deliver to the required workshops and improve production efficiency.

< /p >

< p > more amazing is that the original needs 20 workers to complete the wear (line) work, now an automatic wear machine can be completed.

Liu Dongfang told reporters that such automatic wear machine, the new factory imported a total of three units, "this is much easier than recruiting 60 workers."

< /p >

< p > through intelligent design and layout, the three production processes of warping, coating, and shafts are only one person on duty, plus one duty monitor, and 4 people in each class can fully control the workshop with an area of 20 thousand square meters.

It is understood that at present, the 1020 loom looms of the first phase of the Longfeng textile new factory are not all in place. After the completion of the project, the new plant will have more than 6000 looms, and it will probably become the largest textile manufacturer in Quanzhou.

< /p >