What Are The Self Checking Methods For Shoe Pressing Equipment?

Check at least once a month. Drop a few drops of the hydraulic oil in the filter paper for 2~3 hours. If the oil is polluted or decomposed, it will be easy to see the stain.

Although it is difficult to judge whether the hydraulic oil is replaced or not, experience can get the proper replacement period of the hydraulic oil, and users should check the shoe making equipment regularly.

Shoe factory staff in the use of oil pressure shoemaking machinery or equipment, more or less will have some faults, in order to prevent these failures as far as possible, we should take some measures to check mechanical equipment regularly.

The following are self inspection methods during the use of shoe making equipment:

1. shoe factory employees can observe with the naked eye: put the new hydraulic oil and the hydraulic oil in the different test tubes, compare the two samples, check the color of the oil, whether the float exists or not, and the moisture on the lower side of the tube.

2. use the comparative method to check the stain of shoe making equipment.

After dropping a few drops of hydraulic oil in the filter paper, generally observe the oil for 2~3 hours.

If oil is polluted or decomposed, it is easy to see stains.

Though difficult to judge

The replacement of hydraulic fluid can be achieved by experience.

3. if the above test results are abnormal, it is necessary to conduct further tests in the laboratories of the testing agency or sales industry.

Experts in sales and testing organizations should know if they need to be replaced immediately.

4. users should be regular.

The inspection is carried out at least once a month. The inspection is carried out by the oil supplier. Every three months before the injection machine is installed, it is checked once a month. After three months' installation, it is checked every three months.