Fashion Design: Tell You Some Modeling Methods Of Summer Neckline

In fashion design, the neckline and shoulder area is always the most attractive position, we need to decorate them.

Introduce several modeling methods of summer neckline, don't make collar shoulder more characteristic ~ hope to give you inspiration and can be used in any shirt in summer~

Modeling of bow neckline

The opening is at the bottom of the neckline through a band that has been stitched into a loop.

• Draw a line as the depth of the neckline

• Transfer the breast dart to the middle of the anterior plate, as shown in Fig.

• We draw an extra line after cutting.

• After segmentation, leave the allowance of wrinkles, and modify the line in the middle of the front.

Modeling of ship type neckline

In this model, the collar is wide, and the collar itself can be tied into a tie to keep you on your shoulders.

• Cut according to the icon, transfer the shoulder dart from front to back, and modify the line.

• Cut the sleeve prototype drawing along the middle.

• Connect the sleeves to the body, see figure.

• Draw the shoulder line and re split the body and sleeve, as shown in the figure.

• We outline the line of the neckline and the width of the collar.

• Please note that the collar should be slightly higher than the shoulder, see Fig.

• Shorten the sleeve and put the two halves together again. The sleeve is a raglan cut.

• Simply lengthen the front collar to get a tie length of 15-20 cm.

• Outline the neckband.

• Correct the line of sleeve and collar.

• These are the details we get.

Modeling of asymmetric neckline

Beautiful shirt with interesting details, I like its originality.

• We will move the dart into the armhole, which is necessary for the sleeve to move freely, as shown in the figure.

• Let's outline the sleeves and don't forget to deepen the armholes.

• We outline the lines of the suture surface, as shown in the figure.

• We cut along the middle line of the front piece.

• On the left side, we outline the curve, see figure.

• These are the details we get.

Modeling of open neckline on the shoulder side

An interesting shirt by fashion designer Silvia tcherassi,

It's quite special.

• Cut out the dart and outline the depth of the neck.

• We've drawn out the shoulder line and deliberately deepened the armhole.

• Mark the ends of the shoulders, which will help shape the width of the neck further.

• We outlined the width of the neck according to the photos and cut off the extra part of the shoulder.

• First of all, we outline the lines of the collar on the front detail, because it will be located in the finished product. Then according to these lines, we will make our own collar, as shown in the figure.

• Don't forget that the collar is double, that is, fold in half. Be sure to cut it off and place the cloth along the diagonal line. This is necessary, otherwise it will be uneven.

• The back is modeled in the same way.

• This is what we finally got.