Photo: Experts Expose The New Technology Of Fur Raw Materials

Nitrate technology --

International designers use them from

All fur materials must first be tanned before they start to buy fur raw materials.

After buying fur, the next stop is the tanning factory.

Now the advanced leather factory is a world that combines technology, chemistry and fashion trends.

Here, the product of nature will show its brand new face.

At the time of sending to the tanning factory, designers will study the color, design and production required by the experts.

Once they have made their choice, experts in the field begin to create their magic.

Nitrate Technology

First, the fur will be differentiated according to the different buyers. Then, the fur raw material will be put into the big tube immediately to be thoroughly soaked.

Therefore, we must first call the weight of fur to determine the amount of water needed.

Once the fur is thoroughly soaked, check the fur once and rinse it thoroughly.

Then the fur was put into another big barrel.

This large tube is packed with brine, so that the salt of the nitrate can be fully entered into the fur.

The process takes about 1 to 2 days.

Nitrate Technology

Then the fur was put into a special machine, carefully removing excess leather components and cleaning it again.

After this process, the fur will become very light and soft.

Then, the fur will be placed in another solution for another 1 to 1 and a half days.

After the completion of the process, the fur was placed in the centrifuge -- just like the high speed dryer -- this is a very important process.

At this time, the fur was put into a large drum, where mineral oil was added, and when the fur rolled in the drum, mineral oil covered the surface of leather and fur.

This process keeps the fur moist for about 60 minutes, and the subsequent fur becomes softer and smoother.

Nitrate Technology

After finishing this process, the fur needs to beat in the sawdust, remove the excess grease, and then beat again to remove the excess sawdust.

The last step is to carefully comb the villi in the same direction for final examination.

During the whole process, the fur was soaked, cleaned, tanned, scraped, dried, oiled and washed again.

This process takes about 1.5 weeks. After a series of continuous operations, the fur can become a natural state that can be used.

Nitrate Technology