Photo And Text: Technology And Creativity Create The Perfect Fur Technology.

Production technology of fur

Production of fur

Part of it is technology, part of the technology, and part of creativity.

Now there are many new technologies to deal with fur, but the process of cutting and sewing fur has remained unchanged for many years.

The ancient craft, which is handled in a new way by inspirational designers, has made revolutionary changes in fur, so that fur has its present appearance and feel.

The most basic technology is still concentrated labor force.

It takes decades of experience and excellent eyesight to produce a well made garment. Unlike other clothing materials, this natural fabric is irregular.

Production technology of fur

I. Basic Technology

Whole skin stitching technology

The most basic technology in fur production is the whole skin stitching technology.

Once the fur is dried, the fur is carefully cut into rectangles and ready for use.

The technology of whole skin stitching is to sew each fur on the side.

Then, according to the design, the required number of rows is spliced.

The length of the clothes will determine the size of the mink used for the length of the garment.

Segmentation of fur Technology

An evolution of whole skin stitching technology is to split the skin that has been fixed on the template along the middle seam of the back.

The more narrow fur will be spliced in various ways to create different effects.

Usually, all the leather on the left side should be spliced together and placed in the middle of the back, then all the right skin should be spliced together and placed in the middle of the front part of the garment.

Pumping technique

The technology of pumping is by far the most demanding technology, adjustment ability and eyesight.

The fur on the template is cut first along the middle of the back.

The length of the design is the sum of all the last small strip width.

This requires the tailor to measure the length and width of the fur that he owns first.

Then calculate the number of diagonal cuts needed for each half of the fur to achieve the required length of clothing.

Because the size of the fur and the length of the garment are different, the ordinary fur will be cut into 1/4 or 1/8 width.

Every cut is a seam.

The fur was then reunited.

Once each part of the garment is finished, these parts will be placed on the template table, which will be joined together as we did before.

After the completion of this step, the charm lies in the fact that clothes are not seams at first glance, but the whole dress can be made into various shapes, lace and any design elements.

Partial pumping technique

Part of the cutters technology is also the first to cut fur.

But in calculating the quantity of fur, one part of this piece of fur can be kept in the original square, and the whole fur handled by the knife technique starts from the lower part of the fur.

This technology is more suitable for clothing with special shapes or in general short clothes.

Production technology of fur

Two, advanced technology

Direction processing in pumping technology

A technical master can enjoy the freedom of design by means of different splicing techniques.

Technicians can design curves, interlaced shapes and even cut patterns.

To create this effect, technicians are required to fully understand how to change the length of the fuzz, how to match colors, and to fully understand all the techniques.

Add leather

There are many reasons why we should use the technology of adding leather into fur.

Moreover, the amount of leather added will also produce different effects, and at the same time reduce the quantity of fur needed. It may also become an important design element.

In fact, the same technology can also use other kinds of fur instead of leather to mix with mink or fox skin, or two different colors, but the same type of fur -- for example, white and Black Mink are stitched together.

The designer's design can use this technology to produce hundreds of thousands of different effects.

Production technology of fur

Applique Technology

By sewing the same type, but different color fur in a herringbone way, the technology of using fur to create inlaid flowers is produced.

The same design can also first print similar patterns on different colors of the same kind of fur, cut the shape, and then stitch it to the desired position.

Similarly, the selected design and the selected colors are determined by the imagination of the designer.

Perforation technology

With the production of both sides of the technology, it is no longer a difficult problem to make the clothes lighter and achieve the effect of two sides.

Of course, this innovation not only produced a new method of clothing production, but also provided a new way to make our clothes without lining and produce a unique effect.

The effect of designing perforation on fur clothing is a very important technology of digging and cutting to create different patterns.

Shapes can be simple squares or other shapes.

But it must be very careful that these holes can not be designed too densely, or they will damage the structure of the garment itself.

Weaving / mesh weaving

The fur is cut into a very slender strip, and then a very elastic line and fur is woven together to get the effect of hand knitting.

Twining

Other tools are used to find new design effects and design opportunities.

Shearing / pulling needle

One of the main techniques is shearing and pulling needles.

The main thing is to pull out the long outer coarse hair and cut the down pile into 3 to 7 millimeters long.

This process can produce warm fur for clothing, knitted or two-sided garments.

Dyeing / reducing colour

Dyeing is another technology after the use of nitrate. It can usually be used on all fur materials. The dyeing process depends mainly on the final color and the color of the fur itself, which can be bleached first and then dyed.

Coloring becomes a process consisting of multiple steps, including dyeing. It can be applied to fur clothing that has been made, or to dye the top and bottom of the fuzz into different colors.

Pigments can be made from natural substances or chemical substances.

Although the colors will fade with time, they can still give women the chance to wear the most beautiful fur clothing in winter. This is undoubtedly necessary for women living below zero.

Laser pattern

Laser template is one of the latest technologies.

This allows designers to engrave their logo, make fur into corduroy, or make fur into a variegated feel.