• <abbr id="ck0wi"><source id="ck0wi"></source></abbr>
    <li id="ck0wi"></li>
  • <li id="ck0wi"><dl id="ck0wi"></dl></li><button id="ck0wi"><input id="ck0wi"></input></button>
  • <abbr id="ck0wi"></abbr>
  • <li id="ck0wi"><dl id="ck0wi"></dl></li>
  • Home >

    Present Situation And Future Innovation Of Neoprene Adhesive

    2008/12/29 14:25:00 41960

         

    Neoprene adhesive

    The adhesives have been developed rapidly since the advent of the last century in 50s because of their high quality, low cost, wide range of applications and strong applicability.

    Only in

    Eighties

    Later, it slowed down. The reason is the toxicity and flammability of solvents. People are worried about the harm and safety of adhesives.

    Some developing countries, such as China, did not limit the harmful substances of neoprene adhesive until July 2002.

    With the increasingly stringent national environmental regulations and increasing awareness of environmental protection, what is the way out for solvent chloroprene adhesive?

    Neoprene adhesive

    The current situation and development direction.

         

    1.

    Neoprene adhesive

    The status quo

        

    1.1, environmental protection concept leading

    Neoprene adhesive

    Development

    Before the implementation of the GB18583-2001 mandatory standard, the content of harmful substances in solvent chloroprene adhesive was out of control. Poisoning and even death accidents occurred frequently.

    Since the implementation of the standards in July 1, 2002, there are rules and regulations, and the production enterprises are bound to stop doing whatever they want.

    From no control to control is undoubtedly a great progress.

    It should be clear that the GB18583-2001 standard.

    Neoprene adhesive

    It is only the lowest market limit, not the environmental protection standard.

    Conform to the trend of environmental protection, there is no "three benzene" chloroprene rubber, it seems to be environmentally-friendly, in fact, no "three benzene" is not necessarily harmless, may not fully comply with environmental protection requirements.

    It should be noted that environment-friendly adhesives should be neither toxic to the human body nor pollute the environment. The two elements are both worthy of the name.

    As for the green adhesive, the standard is higher.

    A small number of enterprises in China have developed environmental labels.

    Neoprene adhesive

    The bonding effect is also good.

    Environmental labeling product certification technical requirements (HBC18-2003) (adhesives) limit the harmful substances more strictly. No toxic organic solvents such as benzene, toluene, xylene or halogenated hydrocarbon can be added during the production process.

    However, this environment-friendly neoprene adhesive is expensive because of its high price.

          1.2、達標與保質未能并行不悖

    The so-called standard is to achieve the GB18583-2001 standard, quality guarantee is consistent with the performance of HG/T3738-2004 "solvent based multi-purpose neoprene adhesive" standard requirements.

    Because the GB18583 standard only stipulates the limit of harmful substances, but there is no requirement for bonding performance. It is not difficult to meet the requirements simply, but the adhesive property is low and the market will not recognize it.

    There is no difficulty in reaching the standard and keeping the quality, but the rising cost and poor freezing resistance are the bottlenecks. Some enterprises have not used the GB18583 standard to limit the availability of chlorinated solvents, and use a lot of low quality and cheap 1,2 one or two chloroethane. Although the test is in line with the standard, the toxicity is very high. In fact, it is the toxic pfer of "three benzene" to the standard, and the harm can not be underestimated.

    The amount of 1,2 one or two chloroethane in every ton of adhesive is as high as 300-400kg.

    GB19340-2003 the standard for adhesives for shoes and bags, made strict provisions on the total amount of halogenated hydrocarbons and the amount of n-hexane, and can be referenced.

    At present, the quality of solvent type neoprene adhesive is rather large. Some enterprises still use benzene or benzene mixed with benzene as solvent in order to reduce costs. The benzene content exceeds the standard, which is totally contrary to the national standard from several times to more than 70 times.

    Some people feel that the application of GB18583 to chloroprene adhesive has poor performance. In fact, it does not mean that the adhesive performance of the standard glue is poor, but the solid content is slightly higher, and the frost resistance is not as good as the chloroprene adhesive containing mixed benzene.

    The result of our experiment is a clear example.

    The commercially available low and low solid solvent chloroprene adhesive has a solid content of 16.8%, containing mixed benzene 45%, solvent oil >35%, glued three layers of plywood, 1Omin after gluing, and after the combined hammer is pressed, the 7d is not frozen in a 25 degree freezer with the strength book open or plate damaged.

    Up to the standard glue and containing 10% 1,2 one or two chloroethane, the solid content must be 18.5%, which is frozen at less than 14 14 degrees.

    The temperature is 1190, the environmental label is 23%, and the freezing temperature is 9.

    Objectively speaking, benzene solvent is the best comprehensive solvent for neoprene, and no other solvent can match it. However, benzene is a carcinogenic substance and is extremely toxic. It must not be used as solvent for benzene.

    Toluene is slightly toxic and can only be used in limited quantities, and its dosage in the US and European regulations does not exceed 5%.

         1.3、產最減少并不意味會被淘汰

    The yield of solvent chloroprene adhesive is decreasing year by year (see Table 1). This is normal because it is replaced by SBS adhesive and white latex.


        

    Annual output of neoprene adhesive

    Up to now, the substitute adhesive with the same performance as solvent chloroprene adhesive has not yet appeared. Although SBS adhesive instead of a small part of neoprene adhesive, it can not be completely replaced because of its poor durability.

    Moreover, the performance of domestic waterborne neoprene adhesive will increase to a practical stage. It will take a long time. Even on that day, the solvent chloroprene adhesive will coexist with water chloroprene adhesive for a long time.

    Market economy is the survival of the fittest. Solvent chloroprene adhesive is superior in performance and cheap in price.

    The unique advantages are sticky retention period, fast curing at room temperature, rapid strength development, high shear strength (see Table 2), good flexibility, temperature resistance 4O -80 C (177 C), good durability (indoor use 1020, outdoor 3-5 years).

    Wide range of applications, can be bonded to a variety of materials.


       

    Shear strength of neoprene adhesive

    Solvent chloroprene adhesive, as long as the environmental pressure of solvents, when new development opportunities, a new way, friendly environment, improve performance, be eliminated is always avoided, old trees will also open new flowers.

         1.4、低質低價惡性競爭嚴重

    Over the past two years, the price of crude oil has skyrocketed and chemical raw materials have risen fiercely, resulting in the spread of low-grade chloroprene adhesives in the market.

    Some inferior products have deceived consumers in the name of "environmental protection".

    The price of solvent is very large, and the price of the adhesive is reasonable. It is puzzling that the price of individual products is still low.

    It is not hard to imagine that if we do not reduce the solid content and do not use high toxic and cheap solvents, we will produce low price products.

    Low price competition is a vicious competition of mutual pressure and mutual destruction. It destroys the normal market order and makes more enterprises fight against the fierce low-end market. The result is a serious impediment to the development of neoprene adhesive.

         1.5、生產技術正在推陳出新

    The production of neoprene adhesive is mostly small and medium enterprises, most of which are workshop manufacturers. They still use the manufacturing methods in the 80s of last century. They are obsolete, backward in technology, crude in equipment, too high in energy consumption, low in efficiency and low in quality.

    Basically homogeneity, imitation and low-grade.

    Whether it is rubber mixing or direct dissolution, most of which use a single feeding method, which seems convenient and time-consuming, but also affects the quality of products.

    The solvent used in the traditional process is mainly benzene, and the primary feeding method has no drawbacks.

    However, according to the GB18583 standard, the amount of toluene is less than 200kg per ton, and the rest should be acetic ether, cyclohexane, butanone, acetone, solvent gasoline and so on.

    Considering the cost, the proportion of solvent naphtha is relatively large, and the old technology is still conservative. It is bound to be slow in dissolution rate, long in dissolution time and poor in solubility.

    Especially in low temperature winter and spring seasons, the problem is even bigger. The neoprene adhesive has poor bonding effect and poor storage stability. The reason is neoprene is not completely dissolved.


    It is gratifying to note that in recent years, some enterprises have improved greatly in scale, production environment and technology.

    Shandong, a rubber adhesive company mainly composed of chloroprene adhesive, has a shady and green plant. The factory building is large and spacious and well ventilated.

    The agitator has a reflux condensing device, no solvent evaporation, and the pipeline is pumped by metering and adding solvent. The adhesive is directly pumped into the storage tank to fill the filling machine with semi-automatic filling. The whole plant can hardly smell when it is running normally in addition to the chloroprene rubber material. It is basically clean production.

    In addition, Guangdong, Shenzhen, Chengdu and other provinces and cities of chloroprene adhesive production enterprises mostly adopt high-speed shear production technology, dissolution is fast, time is shortened, only 4-5h, and the efficiency is very high.

    1.6. Water nitrogen butadiene is significantly different from foreign countries.

    Neoprene latex has been developed since the 80s of last century and has been successfully applied to water-based neoprene adhesive.

    Its characteristics are non-toxic, environment-friendly, non combustible and safe, saving resources, representing the development direction of neoprene adhesive.

    However, the water chloroprene adhesive is drying too slowly, and the adhesive needs to wait for a long time. The initial adhesive strength can not be compared with that of the solvent type, and the frost resistance is poor.

    At the same time, the bonding effect of impermeable materials such as metals, plastics and rubber is not ideal.

    The development of water-based chloroprene adhesive abroad is relatively early.

    Domestic water-based neoprene is still in its infancy. It will take some time to produce products with good quality and low cost.

          2、氯丁膠粘劑的展望

    The development of neoprene adhesive should also keep pace with the times, implement Scientific Outlook on Development, base on unremitting innovation, and thoroughly improve the solvent type neoprene adhesive, reduce pollution, save resources and environment friendliness.

    Accelerate the development of waterborne neoprene adhesive, overcome difficulties in performance, and commercialization as soon as possible.

          2.1、采用先進生產技術 <

    • Related reading

    New Knowledge Of Sports Shoes And Shoes

    Shoe material excipients
    |
    2008/12/29 14:13:00
    41928

    New Development Of Sports Shoes Soles And Surface Materials

    Shoe material excipients
    |
    2008/10/14 10:04:00
    41830

    Big Recognition Of Sports Shoes And Shoes

    Shoe material excipients
    |
    2008/10/10 14:07:00
    41813

    New Way For Shoes And Plastic Enterprises

    Shoe material excipients
    |
    2008/10/10 11:40:00
    41865

    Science And Technology Is The First Productivity And Modernization Of Mold Manufacturing.

    Shoe material excipients
    |
    2008/8/18 13:49:00
    41812
    Read the next article

    New Trend, Shoe Material, Flocking, Color Leather

    The emergence of flocking colored leather is not only a great supplement and development to the variety and color of leather fabrics, but also overcomes the shortcomings of the original leather dyed when it is not concentrated, not coloured or damaged, and can not be changed in a timely fashion with the color change of the market. The color suede leather is made on the basis of the original finished leather, and is made of NIM (a piece of chopped fibers). The length of the nap is 0..

    主站蜘蛛池模板: 亚洲成a人片77777群色| 天天躁日日躁狠狠躁av麻豆| 国产成年无码久久久免费| 亚洲国产精品人久久电影| 91免费国产在线观看| 久碰人澡人澡人澡人澡91| 特级按摩一级毛片| 好男人资源视频在线播放| 出差被绝伦上司侵犯中文字幕| 中文字幕免费在线观看| 日本免费一区二区在线观看| 欧美丰满熟妇BBB久久久| 国产精品久久久久久久久久久不卡| 亚洲图片欧美另类| yy6080理aa级伦大片一级毛片| 男人插女人app| 无码国内精品人妻少妇蜜桃视频| 国产中文字幕电影| 中文字幕在线视频网| 美国人与动性xxx播放| 性xxxxx欧美极品少妇| 免费看h片的网站| 中文字幕日韩精品无码内射| 精品小视频在线| 日韩欧美在线视频| 国产亚洲午夜精品| 久久精品国产只有精品2020| 香焦视频在线观看黄| 欧美一级专区免费大片俄罗斯| 在线观看亚洲网站| 亚洲天天综合网| 激情三级hd中文字幕| 日本免费高清一本视频| 啦啦啦中文高清在线观看6| 久久久精品免费| 精品无码无人网站免费视频| 无码一区二区三区在线观看| 国产四虎精品8848hh| 中文字幕在线看片| 男人把女人桶到爽| 国产精品自在线观看剧情|