• <abbr id="ck0wi"><source id="ck0wi"></source></abbr>
    <li id="ck0wi"></li>
  • <li id="ck0wi"><dl id="ck0wi"></dl></li><button id="ck0wi"><input id="ck0wi"></input></button>
  • <abbr id="ck0wi"></abbr>
  • <li id="ck0wi"><dl id="ck0wi"></dl></li>
  • Home >

    The Method Of Shoulder Saving In Garment Plate Making

    2010/2/9 19:34:00 101

    The Method Of Shoulder Saving In Garment Plate Making

    When the dart is on the shoulders, there are many common ways to deal with shoulder provinces. The three most common method is to stitch the half and relax half the amount, fold the provincial way and treat the shoulder area into several small provinces to form a wrinkle effect.

    There are many commonly used methods of shoulder handling when the dart is on the shoulder. The three most common methods are:

    1, the suture should be sutured to the shoulder, or only one half of the suture.
    2. Fold the dart.
    3, divide the provincial road into several small provincial roads that are not processed.

    Replacing the dart with a folded form can also create a good shape curve of the human body, and because it is folded, the original shoulder line will be modified into a curve, so that the shoulder line can be straight after folding. The highest point corrected by shoulder line is at the center of the provincial road, about 1.5cm from the original shoulder line.

    After merging the original shoulder dart and transferring the dart to the cut under the armhole, three parallel lines can be drawn on the shoulders as the position of the pleat. The middle line is exactly the original shoulder line, while the other two lines are 2-2.5cm on each side. They are about half of the length of the original dart, and are eventually collected to the original provincial point. Cut these lines, cut them from the shoulders to the chest points, then move slightly behind the paper, and divide the three folds into the three fold by merging the cuts under the armhole. Fix the three folds with pins or glue on the paper.

       Increase shoulder area

    Sometimes, in order to get a tighter or more effective result, it is necessary to increase the provincial road. Most of the cases appear in the very fitting style, such as "pleats" coat, swimsuit, tights, Underwear As well as prototype clothing, and so on, but can not increase in the shoulder area near the front centerline. Generally, it will increase by half or twice the size of the province near the shoulder point.

       Shears shoulder:

    In order to get loose effect on the chest, sometimes it will cut the shoulder area smaller. This method is very necessary for some special styles, such as a less fitting blouse or a daily T-shirt changing style, and sometimes to suit some body shape requirements. In general, the shoulder is shortened from inside the outer line to the inside, and then the armhole is redrawn from the new SP point. Small provincial roads such as these are usually slightly shorter during stitching.

       Temporary movement of shoulder provinces

    In many styles, the "move" to other locations at the very beginning will be shifted to the relevant position of the "style" requirement or "temporarily" to facilitate the drawing of the structural lines of the garment under this condition.

    In the pattern, cut from the position of the actual bust line under the armhole, until the chest point is X, then fold the shoulder point at the chest point X for the provincial cusp and replace it with a pin. A cut opening will appear under the armhole. This gap indicates that the shoulder load has been transferred to a new location, and it will not obstruct the drawing line of other parts of the garment. After drawing the structural lines of other parts of the style, the shoulder province can return to its original position. For example, you can simply remove the original pin from the shoulder, and merge the dart under the armhole, or take the adhesive tape and other methods, such as pins or paper, to complete the merger of the provincial road. After completing the conversion, the "temporary breach" will not work in other designs of the pattern.
    • Related reading

    "Basic Method" Garment Board Making Technology

    Learning Area
    |
    2010/2/9 19:34:00
    48

    Analysis Of Three Important Factors In Garment Plate Making

    Learning Area
    |
    2010/2/9 19:31:00
    54

    Segmentation In Fashion Design

    Learning Area
    |
    2010/2/9 19:30:00
    33

    Materials And Tools Needed For Garment Printing

    Learning Area
    |
    2010/2/9 19:29:00
    197

    Key Points Of Dress Design For Women'S Clothing

    Learning Area
    |
    2010/2/9 19:23:00
    133
    Read the next article

    Reasons For Straighten The Collar After The Lapel

    主站蜘蛛池模板: 欧美va在线视频| 怡红院视频在线| 白嫩少妇喷水正在播放| 性videos欧美熟妇hdx| 啊灬啊灬啊灬快好深视频在线| 久久久久中文字幕| 蜜臀精品无码av在线播放| 日本漫画口工全彩内番漫画丝袜| 成人爽a毛片在线视频| 啊啊啊好深视频| 久别的草原电视剧免费观看 | 日本丶国产丶欧美色综合| 国产午夜精品无码| 亚洲va欧美va天堂v国产综合 | 亚洲欧美色一区二区三区| 91精品久久久久久久久中文字幕 | 免费一级毛片在播放视频| japanese酒醉侵犯| 精品精品国产欧美在线观看| 干妞网免费视频| 交换人生电影在线| 88久久精品无码一区二区毛片 | 2021国产精品视频网站| 欧美另类精品xxxx人妖换性| 国产日韩欧美精品一区| 久久国产欧美日韩精品| 美女扒开大腿让男人桶| 天天综合天天综合| 亚洲日韩图片专区第1页| 五月婷婷在线视频| 欧美人成网站免费大全| 国产情侣真实露脸在线| 中日韩黄色大片| 男朋友想吻我腿中间的部位| 国产黄a三级三级看三级| 亚洲AV无码成人精品区在线观看| 韩国三级电影网址| 日本福利片国产午夜久久| 又粗又硬又黄又爽的免费视频| free性俄罗斯| 欧美一卡2卡3卡4卡公司|