Design Of Inner Ear Type Short Tube Female Boots

The structure of the inner ear type short tube boots is formed by grafting the inner ear structure into the low tube boot.

1. finished product drawing

As shown in Fig. 5-2-2, the front shoe of the shoe is pressed on the shoe ears of the back to form an inner ear structure.

The front face of a shoe is shorter, similar to that of a woman's shallow shoe.

"Grandma's boots" means that this shoe, though it was more than 50 years ago, does not seem to be out of date now.

The shoe ears are angular, not circular, with 9 eyes.

From the bottom up to the narrower.

The opening is straight and does not make the difference between the inside and outside.

 

2. structure design drawing

As shown in Fig. 5-2-3, when the outline frame is designed, the height of the back is 120mm and the width of the cylinder is llOmm.

 

The front door of the front door is located near the point of V.

The back midline of the back is a smooth curve from the E point down to the nearest surface.

The 9 shoes are evenly distributed.

Pay attention to the length of the tongue, based on the length of the eye line.

The width of the shoe is about 40mm, and when the tongue is longer, it is easy to move around.

Other designs are high waist shoes.