The Fabric Made In The United States Can Be Used As A Microphone.

For hundreds of years,

In a recent issue of the journal Nature and materials, Fink and his collaborators announced a landmark new functional fiber: a fiber that detects and produces sound.

The application of this fiber includes: it can be made into clothes for microphone, can capture speech or monitor body function, or make a fine single filament that can measure blood flow or pressure in capillaries.

New fiber contains asymmetric molecular plastic.

Ordinary optical fibers are "

In traditional piezoelectric microphones, the electric field is produced by metal electrodes.

However, in a fiber microphone, the stretching process causes metal electrodes to lose their shape.

Therefore, researchers substituted graphite conductive plastics.

Conductive plastics will produce a dense liquid when heated, thus maintaining higher viscosity than metal electrodes.

This not only prevents the material from mixing, but also more importantly, it also gives the fibers a normal thickness.

After the fibers are stretched, the researchers need to arrange all the piezoelectric molecules in the same direction.

At this point, a strong electric field (20 times stronger than the lightning induced lightning field) is needed.

Because everywhere in the fiber is very narrow, it produces a tiny lightning ball that destroys the surrounding matter.

Vocal fiber is widely used.

Although this delicate balance is needed in the manufacturing process, researchers are able to produce this functional fiber in the laboratory.

If they are connected to a power source and applied to a sinusoidal current (very stable alternating current), these fibers will vibrate.

If it vibrates at the audio frequency and near its ears, it can hear different notes or sounds.

In the papers on nature and materials, researchers have measured the acoustic properties of fibers more strictly.

Because water can pmit sound better than air, they put fibers in a tank opposite to the standard sound energy converter. The sound pducer can send out the sound waves detected by the fibers alternately, and can also detect the sound waves emitted from the fibers.

The researchers hope to eventually synthesize the properties of these experimental fibers into a single fiber.

For example, strong vibration can change the optical properties of reflective fibers, so that fiber fabrics can be used for optical communication.

In addition to wearable microphones and biosensors, the application of the fiber includes a network capable of monitoring the flow of water in the ocean and a high-resolution large area sonar imaging system. The fabric made of this acoustic fiber is equivalent to millions of tiny acoustic sensors.

The researchers say that by using the same mechanism, piezoelectric elements can also turn electricity into motion in turn.