Calculation Of Clothing Line And Cost Control

In the process of garment production, the cost of wire consumption is increasingly being affected.

To save line cost, the first step is to calculate the line consumption of a single piece of clothing.

Flat car usage: 1:3 bottom ratio: 1:1

Three line dosage: 1:13.

Four line dosage: 1:16.

Single needle at chain bottom: 1:7.5

1/4 three line car usage: 1:16 bottom surface ratio: 3:2

1/8 three line car usage: 1:14 bottom surface ratio: 1:1

Three needle five line shrimp shuttle dosage: 1:23

Three line density: 1:14, depending on the density.

For each seam that needs to be broken, a seam head plus 12cm length.

Without a broken line, a seam head plus 6cm length;

Under the condition of thick fabric, the above examples should be increased appropriately.

After each place is added to the seam, the proportion is then multiplied and the total loss is increased by 20%.

In the actual production process, line control is very important, and the wrong method will result in waste.

The most important link is the strict control of warehouses. In actual production, it is often a sentence of the production team: there is no line.

The warehouse has to provide the line unconditionally, and then the purchase will have to be filled. After the order is finished, the workshop is covered with lines everywhere.

So how to control it depends on the specific production and operation of the factory.

For example: cut out the bed, fill in the goods list, produce the voucher, and look at the warehouse.

It is impossible to know the quantity blindly.

Sometimes a small divider is used because it is large.

There are also ways to strictly enforce the line changing system when changing colors.

Other wired quality control, quantity control and so on.