• <abbr id="ck0wi"><source id="ck0wi"></source></abbr>
    <li id="ck0wi"></li>
  • <li id="ck0wi"><dl id="ck0wi"></dl></li><button id="ck0wi"><input id="ck0wi"></input></button>
  • <abbr id="ck0wi"></abbr>
  • <li id="ck0wi"><dl id="ck0wi"></dl></li>
  • Home >

    Shoe Material Quality: Distinguish The Authenticity Of Leather.

    2010/9/27 18:35:00 44

    Shoe Material Quality Leather Authenticity

    1, the quality of shoe material includes two parts, vamp and shoe. Leatherwear Authenticity


       Natural leather That is Genuine leather It has pores. When you can't see clearly with your eyes, you can press the skin with your thumb to see if there is a fine leather pattern beside your thumb. It has fine texture, disappearance of fine lines after releasing hands, good elasticity of leather shoes, and better natural leather. If there is no fine grain, most of them are not natural leather, including two layers of shaving film leather.


    Another notable feature of natural leather is the blemish on the surface. Generally, the natural leather upper is slightly defective in the inside of the shoe and in other inconspicuous places, such as uneven skin width, bright furuncle, tick boil and so on. There are three layers of cross section of natural leather, which are dense and different. The epidermis is very fine and flexible, and there are dense dermis in the middle. The following is a loose meat surface fiber layer, and there is no obvious demarcation between layers.


    Leather shoes are used as reinforcing materials to prevent extended deformation and improve foot touch. It is required that the shoe lining material has fine touch, breathability, excellent moisture absorption and moisture retention, and no color loss. The middle and upper leather shoes are made of natural leather and cotton cloth. If the vamp is natural leather, the shoe lining is the artificial substitute leather. It can only be regarded as the middle and low grade shoes. Most consumers ignore the choice and identification of shoe lining materials, which is wrong.


    2. Check the upper and the bottom seam to identify the quality of the processing.


    See if there is a broken line and whether the upper stitch is neat and regular. In particular, the bonding part of the adhesive shoe leather bottom should be glued and smoothed without any gap, and there is no indication of virtual sewing and glue opening.


    3. Touch the inner cavity of your shoe with your hands to see if there is a bumpy phenomenon inside and inside the shoe.


    Wherever you can touch your feet, you can't be bumpy or your feet will blister. The shoe must be provided with an insole, which is designed to keep the shoes clean, covering the rugged nails at the bottom and improving the touch of the feet.


    4. Use hand to pinch the heel of your upper to see if it is stiff and elastic.


    It is not necessary to have a groove mark on the rear part of the rigid part, and the elasticity below the ankle is not good enough to damage the ankle.


    5. Press the bottom of the waist to see if it is hard.


    The bottom of the shoe is the trunk and skeleton of the shoe, and press hard as the bottom of the shoe. If the skeleton and trunk are not stiff, the shoes must be deformed and damaged.


    6, put your shoes on the table or glass panel at random, to see if the shoes are stable. When shoes are placed on the table, the left and right sides should be suspended immediately. {page_break}


    7. Use the middle finger tip to insert the front toe sole to see if the height is suitable.


    When the head of the shoe tip is exactly enough for the middle finger to indicate the belly thickness, it indicates that the front toe of the shoe tip is suitable. When the front toe of the shoe tip is too large, the stability is reduced; the shoe toe is worn quickly before the foot is lifted, the shoe is easily deformed, and the foot is easy to fatigue.


    8. Hold your shoes with your hands to see if the shoe sole and heel contact is smooth.


    Light the sole and heel lightly against the side of the table (or counter), so that the side of the shoe is upturned to view the contact area of the sole. It is better to contact the side of the table with the sole (the widest part of the sole) and the whole heel plane. Otherwise, shoes will be easy to deform and drop heels.


    9. Put your shoes on the table and check whether it is right from two directions.


    From the front of the shoe, look at the size of the inside and outside edges of the sole from the top of the table. From the heel of the shoe, check whether the heel is vertical or not, so that it does not tilt to the inside or outside.


    10, with index finger erected on the side of the shallow shoes to help the outside, check the upper ankle height.


    The tip of the index finger comes down to the bottom of the shoe, so that the index finger is closer to the upper part of the outer ankle, and the second finger knuckle line of the index finger is highly consistent with the upper arm of the outer ankle. General life shoes, social etiquette shoes, fashion shoes, slightly lower than the index finger second finger knuckle line is good; low waist sports shoes and casual shoes are soft mouth structure, the external ankle height can slightly higher than the index finger second finger joint line.


    11. Look down from upwards and downwards to see the symmetry of the shoe parts and the deformation of the shoe outline.


    Taking the straight line between the tip of the shoe and the middle point of the heel as the symmetrical axis, see whether the components on the vamp are symmetrical or not. The shoe outline should be folded in the shoe, smooth and round, and the twisted leaf should be twisted into inferior shoes.


    12. Understand the performance of the sole of the shoe and choose the suitable outsole.


    According to the main raw materials, it can be divided into rubber base, imitation leather base, plastic bottom and so on. Their properties are: Rubber soles are soft, elastic, skid resistant, wear resistant, heat-resistant and cold resistant. They only have a heavier texture. The imitation leather soles are light, stiff, wear-resistant and resistant to twists and turns, but with poor elasticity and less slip resistance. The plastic soles are wear-resistant and elastic, but the texture is hard, and the heat resistance and cold resistance are poor.

    • Related reading

    Knowledge Of Shoe Maintenance

    Recommended topics
    |
    2010/9/27 18:22:00
    166

    Anti Counterfeiting Instructions Of Hongxing Erke

    Recommended topics
    |
    2010/9/27 18:18:00
    300

    Shoe Culture: The Formation And Development Of Footwear

    Recommended topics
    |
    2010/9/27 15:30:00
    34

    穿拖鞋開車是違反規(guī)定的

    Recommended topics
    |
    2010/9/27 15:29:00
    47

    How Much Do You Know From The Evolution Of Boots To Shoes?

    Recommended topics
    |
    2010/9/27 14:35:00
    89
    Read the next article

    Hongxing Erke Brand Culture

    "Hongxing Erke" is like an ambitious swan, lofty and lofty, without fear of challenge and constant struggle, becoming an outstanding example. This name defines a kind of spirit -- the firm and enterprising idea advocated by Hongxing Erke.

    主站蜘蛛池模板: 亚洲欧美成aⅴ人在线观看| 好男人社区视频| 国产真实伦视频在线观看| 亚洲日本一区二区三区在线不卡| WWW四虎最新成人永久网站| 男人j放进女人p动态图视频| 网站正能量www正能量视频| 日本处888xxxx| 国产乱了真实在线观看| 久久久久国色av免费观看| 英国性经典xxxx| 成年女人18级毛片毛片免费观看| 四虎影视永久在线精品免费| 中文字幕视频在线免费观看| 老子的大ji巴cao死你| 日韩爽爽视频爽爽| 国内大量揄拍人妻精品視頻 | 1313mm禁片视频| 欧美日韩精品一区二区三区不卡| 国产精品第2页| 亚洲国产成人av网站| 69xx免费观看视频| 暴力调教一区二区三区| 国产免费观看黄AV片| 中文字幕日韩高清| 精品99在线观看| 在线拍揄自揄在线播放| 亚洲国产日产无码精品| 国产福利在线导航| 无限资源日本免费2018| 国产在线观看免费视频播放器| 久久久久久久99精品免费观看 | 91偷偷久久做嫩草电影院| 欧美巨大xxxx做受孕妇视频| 国产欧美一区二区精品久久久 | 狠狠综合欧美综合欧美色| 国产色产综合色产在线视频| 亚洲av永久无码精品天堂久久 | 欧美色图一区二区| 日本一区免费电影| 伊人热热久久原色播放www|