The Sequins Sewing Machine Is Fully Armed.

Ready to wear show, enjoy the gorgeous evening. Full dress Exhibition. The model moved and moved, and the sequins on the dress made a beautiful glow. Nowadays, this fashion element is not only on the dress, but also the T-shirts, children's clothing, handbags, shoes and hats, and even the cushions in the family.

Sequins (also known as beads and gold pieces) are used as decorations for clothing. They are usually finished on the fabric through a multi head computer embroidery machine. However, in the process of embroidery, due to machine failure, there will be leakage embroidery or less embroidery, which will affect the quality of embroidery. These small embroidered or poorly embroidered sequins often need to be manually stitched up, which takes time and effort. Therefore, a sequin embroidery machine for improving the efficiency of embroidery, reducing the labor intensity of workers and improving the quality of embroidery products arises at the historic moment. After that, a variety of sewing machines such as single chip sewing machines, double sequins sewing machines, dribbling sewing machines, and strip sequins, two in one sewing machines have been developed. The working principle of this sewing machine is similar to that of the single head embroidery machine. The cost is relatively low, the floor area is small, the operation is simple, and it is more suitable for the small batch, multi variety and short cycle production mode of the garment factory nowadays, and the market potential is large. At present, the products are mainly exported to India, the Middle East and other countries and regions.

This product has many similarities with the sequins computerized embroidery machine. Sequins computer embroidery machine is an integrated product of machine, electricity and gas. It can automatically switch positions and automatically embroider sequins, sequins and sequins. The sequin sewing machine is a new type of machine which is derived from the sequin feeder after the sewing machine is installed. Through the stitching of the thread, the laser belt with holes in the middle is automatically sliced, and the stitching is fixed on the material. The direction of the sewing seam can be manually controlled, and any pattern and pattern combination can be sewn by the car. The interval and combination of the sequins can be controlled by the electric control system. Sequins sewing machine is widely used in fabrics, such as velvet, denim, needle / woven fabric, genuine leather and other synthetic leather. It is mainly used for underwear, women's wear, fashion, children's wear, T-shirt, handbag, hairdressing, shoes and caps, etc. Decorative sewing 。 The specifications include 3 millimeters, 4 millimeters, 5 millimeters, 7 millimeters, and 9 millimeters. Some of them can also make two sequins of different sizes. The biggest difference between the two is that the control system of the former is multi axis control system, which can take X/Y direction, and the latter is single axis control system.

At present, sequins Sewing machine The main manufacturers are Zhejiang refinement, Shanghai Baoshi, Tianjin Baoying, Wuhan Meijia, Taiwan Venus, Japan's sewing and other enterprises.

"Refinement" 8830 computer gold tablet machine

Zhejiang new fine sewing machine Co., Ltd. has been producing computerized gold tablet machines since 2006. It has 8800 models, 8830 models of 8810/8820 and three models, of which 8800 are of general mechanical type, 8810/8820 is mainly used for sewing the same specifications of gold pieces, 8830 is computer controlled, and two kinds of gold tablets are made at the same time. The price ranges from one thousand yuan to seven thousand or eight thousand yuan. This series of products is based on its 3800 type chain sewing machine with double rollers and gold pieces.

The "refinement" 8830 computer gold tablet machine adopts servo system, which not only makes the machine more stable in high-speed operation, but also accurately controls the speed of the gold slice output, effectively reduces noise and reduces vibration, and can embroider two different sizes of gold pieces at the same time, which can achieve lamination seams, and the system has 55 kinds of memory.

The machine is equipped with a high speed independent chip sewing device with high reliability. The working speed can reach 90~9000 needles per minute, and two dimensions can be used to lock the sequins. Customers can also edit their own patterns according to their needs. There are 55 patterns of memory in the system. Up to 99 x 99 ways to send film can be selected. The operator can make any sequins.

The operation screen is simple and easy to use, and also has the functions of automatic feeding, slicing and automatic refueling. The machine adopts simple mechanical transmission mechanism, its structure is flexible and concise, its performance is stable and reliable, and its operation is convenient. It is a patented product for refinement company.

Main technical parameters

Line number 2

Needle type DB * 1 14#

Stitch length (mm) 0 to 4.5

Presser foot height (mm) 5.5 to 10

Maximum sewing speed (r/min) 4500

"Kingleo" LZ-8920CQ type double sequins sewing machine

The "kingleo" LZ-8920CQ double sequins sewing machine was produced by Shanghai Bao Shi sewing machine Co., Ltd., and was put into the market in November 2007. The product was developed on the basis of the original LZ-271CQ sequins embroidery machine. It can sew two different sizes of sequins at the same time, and adopt advanced fork feeding mechanism to meet the needs of some users just sewing straight lace, saving investment cost and improving production efficiency.

Main features:

1. The fork type double feeding mechanism supports two different kinds of sequins combined stitching. Two sequins can overlap the pieces or alternate intervals, and have two functions, namely, nail sequins and sequins. It is easy to realize any combination of two different sizes of sequins only by changing a pair of guideways, and it is very convenient to change the guideway.

2. The use of fork type feeding film can effectively reduce the error when sending the film, ensure that each piece is delivered accurately, effectively prevent the chip or card from being removed, and use the cutting device to break the slices, so that the chips are round to prevent the broken pieces from happening. {page_break}

It can be programmed to set up the supporting and feeding mechanism; the stepping angle of rotation and the step length of the chip can be programmed; under the condition of the nail machine, the number of spacer pins of the sequins can be programmed; 55 kinds of flower patterns are pre stored, and the patterns can be programmed according to user requirements.

4. It can be improved without the use of the bead device. It can be used as a high-speed sewing machine and improve the utilization rate of the equipment. The servo motor control has the function of automatically stopping the needle, the sewing can be fixed, the sewing speed can be freely adjusted, and the power consumption of the sewing machine is about 50% compared with that of the ordinary sewing machine.

Main technical parameters

Sewing speed (r/min) ordinary flat sewing speed 5000; nail slice speed 950

Sequins specifications (mm) 3, 4, 5, 7, 9 (two of them can be selected at the same time, 3, 5).

Stitch distance (mm) 0~5

Presser lift height (mm) 5.5/13

Sewing fabric thin, medium and heavy materials

Servo motor power (W) 400

Motor voltage (V) 220

"Fu Yi" high-speed industrial double sequins sewing machine

The product is produced by Fu Ying subsidiary, Tianjin BAOYING Computer Machinery Co., Ltd. Fu Yi is one of the earliest enterprises producing computerized embroidery machines in China. The printing system, mechanical parts and electronic control system are developed independently and produced, and have certain influence in the embroidery machine market. Based on the needs of diversified production and marketing, Baoying company started producing single chip sewing machine in 2006, and launched double sequins sewing machine in 2008. Its performance and structure have been greatly improved. Because of the solid foundation laid in the field of embroidery machine, there are many kinds of sewing sewing machines developed by BAOYING company. There are 6 kinds of sewing machines, including single bright piece sewing machine, double sequins sewing machine, single wafer patch machine, double sequins patch machine, drier sewing machine and two pieces of sewing machine with strip sequins.

The sequins and electronic control system of "Fu Yi" double sequins sewing machine are designed and produced independently, and enter the field earlier. The experience is relatively rich, and the product stability is better.

Main features:

(1) two or 3~9 pieces of sequins can be sewn by the front and rear devices. The two device can work alone or alternatively, or two at the same time.

(2) by simple setting, all kinds of sequins can be realized: single chip, spacer, laminated, continuous and segmented.

3. The sewing speed of the sequins can reach up to 1000 rpm.

4. The new 45 degree special chip device has smooth line of sight and flexible operation. The device is designed and developed by Fu Yi, and the check stop parts of the sequins are applied for patent protection.

It can sew all kinds of sequins, such as plum, diamond, square and other special-shaped pieces, and round rope, ribbon, lace and so on.

Meijia GC701-S sewing machine

Wuhan Meijia group Limited by Share Ltd mainly produces computerized embroidery machines for high-tech enterprises in Hubei province. "Meijia" GC701-S sewing machine is a sewing machine with multi function sequins, which has all functions of ordinary sewing machine. The computer system has 30 patterns and 20 fixed patterns. Users can edit 10 patterns according to actual needs. The gold plate device system adopts the fork type to send the film. In order to ensure the stability of the feeding piece, special adjustable speed motor is selected. The machine has manual and automatic chip setting function.

Main functional characteristics

(1) powerful support for single large (5 mm), Dan Xiaopian (3 mm), size crossing, laminated and other embroidery methods.

55 kinds of pre stored patterns can be called directly.

Through computer control system, users can edit patterns independently.

4. With the function of embroidery, it can be used instead of embroidery machine.

5. We can stitch round shape, square, plum, diamond, bump and so on.

Main technical parameters

Stitch distance (mm) 3~5

Sewing speed (r/min) 80 ~ 1200{page_break}

Voltage (V) 220

Power (W) 560

Sequins specifications (mm) 3, 4, 5, 6.75