Introduction To The Performance Characteristics Of Domestic Electronic Flat Nose Keyhole Machine

The main performance characteristics of ZOJE ZJ5780 electronic flat nose keyhole machine are:

1. the feeding and needle bar swinging mechanisms are driven by stepper motors, with the ability to decompose up to 0.05 millimeters, making the stitches stable and beautiful.

2. pass

It can set the speed of the first 5 pins to achieve slow start and effectively prevent the breakage of the machine at high speed.

3. through the computer control system, we can sew the reinforcement joints of the last few pins to prevent the buttonholes from falling off.

4. equipped with 30 diversified standard keyhole shapes.

The main performance characteristics of the new nt-1790 electronic flat head lockout machine:

1. the feeding and needle bar swinging mechanisms are driven by stepper motors, with the ability to decompose up to 0.05 millimeters, making the stitches stable and beautiful.

2. the speed setting of the first 5 needles is realized through the operation panel to achieve slow start, effectively preventing the breakage phenomenon when the machine starts at high speed.

3. through the computer control system, we can sew the reinforcement joints of the last few pins to prevent the keyhole off line.

Four

Equipped with 30 standard form of keyhole.

The main performance characteristics of ccf-1790 series electronic flat nose keyhole machine are:

1. the highest sewing speed can reach 4200 rpm.

2. the independent stepper motor controlled shearing mechanism can accurately cut the cross section / bottom line.

3. by adjusting the tension of the electromagnet clamp, the tension between the parallel part and the sleeve part of the keyhole can be realized.

4. the operation panel adopts full screen LCD display, high definition graphics identification, and can complete all data set, graphic editing and modification on the operation panel.

5. operation panel supports USB data interface. Special design: This machine has flat machine tool and simple machine tool. It is especially suitable for sleeve and pocket keyhole, and can carry out pattern pmission and program upgrading through it.

6. the system has 30 different shapes of memory.

By using adjustable needle holder, the size of keyhole can be changed. Besides, it can be extended to the maximum of 99 patterns, and can be edited and selected freely through operation panel.