Fabric Design Of Down Jacket

The eiderdown of down eider is characterized by light, soft and warm. These characteristics are largely determined by the content and quality of down garments.

There is no introduction to the feather here. Below is the down jacket

The following is a brief introduction.

Down fabric design: use pure cotton PU coating fabric, and TTU isolation layer (pure cotton base fabric yarn density using 200T, plain weave).

Pure cotton PU coating fabric is silky, delicate, and feels tight.

The properties of pure cotton are easy to absorb sweat and breathe well. The PU coating makes it easy to wrinkle, has excellent elasticity recovery function and can effectively prevent leakage.

Appearance and sewn quality: pay attention to whether there are drilling wool and drilling wool on the fabric. The three parts of the finished product are evenly distributed, requiring fine and neat stitches. The process of inserting, inserting and rolling should be neat and stretched, and can not be twisted or uneven. The biggest feature of the TTU isolation layer is heat absorption, ventilation and moisture conduction.

Although the fabric is thin, it can not see the snow and white down.

Trademark: first, see if there are any registered trademarks and instructions for the use of the products; the down down content of the down garments is 90% down.

10% gross.

Rub: use both hands to knead down and down the down garment to see if there is any fluff.

If there is fluffy drilling, it indicates that the fabric or linings used for drilling are not of good performance or are not good for drilling down, and are inferior products.

Those who write 100% down must be fraudulent.

Fluffy degree: good products not only have good fluffiness, but also require good air permeability. Through the rolling and weaving process, the fiber of TTU isolation layer is unusually tightly combined, and the porous structure of its fiber can effectively guide moisture and air to absorb sunlight.

Therefore, it has extraordinary windproof, warm and breathable properties.

Down Jackets

The polyester taffeta made of fine denier polyester silk is used.

This polyester taffeta is a fully polyester thin fabric. It is made of fine denier polyester filament (increasing moisture absorption and breathability of fabrics) and woven into a fabric with silk appearance style. Its color is bright and bright, and its handle is smooth.

The warp and weft fabrics are made of semi dull (soft gloss, dyeability and drapability). The fine denier polyester filament FDY50D/48F (the 75 denier fully denier fine denier polyester filament is made up of 48 monofilaments) is used as raw material. The plain weave fabric is interwoven on the water jet loom. According to the specification of 290T (preventing the down leakage), the nose is close to the down jacket and sniffed, and then compared with the normal down garment, to check whether there is fishy smell or peculiar smell.

Weigh it: weigh the weight of the down garment by hand, and watch its size. Generally speaking, the lighter the weight is, the larger the volume is, the higher the quality of the down pile, the better the quality, and vice versa, the quality is poor.

Touch and pinch: feel the softness of the down garment, and complete the small hairs.

If the handle is soft and has a complete small piece of film, it is a good product. If there are too long and too thick wool, it feels soft but not elastic. It is soft wool instead of down.

Four Pat: hand pat down down clothes to see whether there is dust overflow at the stitch.

If there is no dust spillover for good products, if there is dust overflow, it is a fake and inferior product made of crushed wool or grey sand velvet.

Grey cloth is characterized by relaxation, desizing, alkali reduction (air permeability increasing), dyeing, softening, shaping and other finishing processes and special finishing processes. The fabric has uniform texture, thin and breathable, soft and delicate surface, smooth and ironing, and anti leakage.

Ideal liner material.