Home >

Textile Industry Downstream Demand Is Not Strong, Strive To Create Exquisite Knitting Knitwear

2012/12/4 11:55:00 31

??? 日本語 Fran?ais English 中文

this year, it seems to be a foregone conclusion for the whole a target= "_blank" href= "http://www.91se91.com/" > textile < /a > industry.

However, compared with the cotton spinning and chemical fiber industry, the growth rate of the knitting industry can still be maintained above 10%, which is also a good achievement.

Although it is a little lower than the 20% increase in previous years, it can still be regarded as a normal growth rate.

at present, although the sales of knitting machinery have also been affected, the overall situation has not surpassed the range that people can tolerate. Although the lace machine has dropped sharply in the beginning of the year, it rebounded again in May and June. The overall sales of the warp knitting machine were still good; the sales of computerized flat knitting machine had a big decline.

In fact, most of the knitting needle manufacturing enterprises feel very similar to the knitting machine manufacturers. Many knitting needle enterprises reflect that although the peak season is only one month this year, the peak season time has been reduced by three or four months compared with the previous years. The overall sales have been affected, but judging from the off-season, the degree of impact is not large.

And this effect is even weaker for enterprises which are mainly middle and high grade knitting needles.

downstream demand is not strong. Knitting sales have shrunk a lot.

because knitting needle is a consumable product, it can not only match with the main engine of production enterprises such as hosiery machine, computerized flat knitting machine, circular knitting machine, but also can be used for equipment wear modification of hosiery enterprise, < a href= "http://sjfzxm.com/news/index_f.asp" > sweater < /a > production enterprise.

The sharp decline in sales of knitting machinery has given needle manufacturers more emphasis on the needs of knitwear manufacturers.

but more unfortunate is that with the spread of financial crisis in Europe and America and the rise of manufacturing industry in Pakistan, India, Vietnam and other countries, the trend of domestic manufacturing costs rising and low-end foreign trade orders gradually moving to Southeast Asian countries has been emerging. Under the impact of this series of objective factors, Zhuji's traditional socks industry has been in crisis.

Shen Yong, general manager of Zhejiang Pinghu Jinli knitting needles Co., Ltd., has deep feelings about this. He told reporters that because their company mainly produces knitting needles for hosiery machines, in the past few years, when the socks industry in Zhuji was booming, some of the company's overtime products were in short supply. But most of the socks manufacturers in Zhuji recently stopped production and reduced production, resulting in a large shrinkage in Pinghu Jinli needle company sales.

there are some problems in the sales of computerized flat knitting machines this year due to the direct fluctuation of fiber price.

This also allows Kunshan Kai Yi knitting needle Co., Ltd. money fire root confirms that he did not have the computer knitting machine knitting machine production line correctness.

He said: "when the computerized flat knitting machine bought the fire, many customers in Shanghai hurried with needles, drove Mercedes Benz and BMW from Shanghai to Kunshan to pick up needles. At that time, I felt the potential crisis of needles for flat knitting machines. What we could do was too much. Sooner or later, there would be problems."

positioning high-end target is to replace imports /p >

in the face of many unfavorable conditions, many socks enterprises in Zhuji have launched technological innovation to find new markets for socks exports.

New materials such as coffee bean fiber, pearl protein fiber and wood fiber have now become new raw materials for stocking.

For example, a stocking made of wood fiber has been mass-produced in the ark hosiery company.

The unique element of the socks has the characteristics of breathability, antibacterial, no hardening after washing, no pilling, etc. the wear-resisting property is more than 10 times higher than that of ordinary cotton socks.

It is understood that the development of this new product is successful, and it will add more than 20 million yuan per year to the enterprise.

The use of new materials on socks undoubtedly poses new technical requirements and difficulties for many < a href= "http://sjfzxm.com/news/index_c.asp" > knitting needle manufacturing enterprises < /a >. Only by constantly satisfying this new requirement will enterprises firmly grasp their initiative.

Shen Yong, general manager of Zhejiang Pinghu Jinli knitting needles Co., Ltd., told reporters that the company is considering product pformation due to the current market situation. In the future, the company plans to pform the product research and development focus from the socks knitting needle to the large circular knitting needle.

He said that although the manufacturing process of large circular knitting needles is much more difficult than knitting machines, the company still has confidence in developing such products.

span style= "font-family:" Song body ";" span ";" Yu ";"

--EndFragment--!

Kunshan Kai Yi knitting needle Co., Ltd., Qian Horgan, in talking about the direction of product development, said that the company will continue to focus its research and development on high-end products in the future, and the company's goal is to replace imports.

Qian said: "although our knitting needles can not be matched with the well-known looms abroad, we can make our products reach the level of foreign enterprises through efforts, so that once the looms of the imported looms fail, the advantages of timely delivery and high cost performance will come out. What's more, the potential demand in this market is huge."

multi ring to create fine knitting knitted needles .

knitting needle is a kind of knitting equipment which is very complicated in product type and size. At the same time, it is also a precision manufacturing product. It is a kind of metal product which requires uniform size, smooth surface, good elasticity, and also requires fatigue resistance and corrosion resistance.

Only by using harsh requirements can we produce satisfactory knitwear.

In order to produce high quality needles, we need to select high-quality steel products, pay attention to production details and conduct a complete inspection.

first, select high quality steel for special purpose.

Because China's iron and steel industry is not only weak in research foundation, but also under the market economy condition, it does not pay enough attention to special special-purpose and small batch Steel Research and development. This makes our knitting needle manufacturing enterprises have no special steel products to choose from in China, but they have to purchase from manufacturers such as Germany and Sweden. Although the price is more expensive, it has a very important reuse and significance for improving product quality and grade.

Kunshan Qian Yi knitting needle Co., Ltd. Qian stressed that the quality of raw materials directly related to the quality of the needle, and spend more money to buy materials to produce knitting needles, the average cost per cent to each needle is more than a few cents, customers can be recognized, as long as the product quality is good, even if a little increase in the price of finished products, will not worry about product sales.

secondly, knitting needle is the process component of knitting machinery, which is closely related to the quality of knitted fabric. Because knitting needle is an inconspicuous small part, it requires batch products to have better consistency in the production process. Therefore, we should pay attention to the manufacturing quality such as size, shape, hardness, elasticity, surface roughness and so on. These small links often determine the grade of product quality.

finally, a complete testing system is also needed.

Although knitting needles are small, their manufacturing technology is designed in many fields, such as wear, tear and fatigue of needles. It is necessary to conduct targeted failure analysis and chemical analysis, and then adjust the analysis indicators accordingly. This requires a complete testing system. At the same time, a complete testing system is also a need for continuous improvement of the quality of production enterprises.

Although these requirements are not low for the production of domestic knitting needles, it is a threshold for domestic needles to have a place in the international market of knitting needles.