Printing And Dyeing Industry Has Large Demand For Energy Saving And Environmental Protection Equipment.

< p > although the overall industry is not very prosperous, there are always some bright spots in some industries.

The industry did feel the initial appearance of the effect of eliminating backward production capacity in the past two years.

Under the swing of the national policy of eliminating backward production capacity, the setting machine, < a href= "http://www.91se91.com/news/index_c.asp" > printing and dyeing equipment < /a > has become an enduring bright spot in the market.

< /p >

< p > there are some bright spots in some industries when the overall economy is not too good.

In the country's elimination of backward production capacity policy swing, the setting machine, < a href= "http://www.91se91.com/news/" > rotary screen printing machine < /a > printing and dyeing equipment has become an enduring bright spot in the market.

< /p >

< p > < strong > demand for Energy Saving Equipment > /strong > /p >

This year, most p manufacturers are not worried about orders.

Because, with the promotion of backward production capacity elimination, Shishi, Shaoxing and other regional printing and dyeing enterprises have been quickening the pace of updating the machine.

< /p >

< p > for example, Zhejiang Wuxing has been included in the 15 printing and dyeing enterprises that have been upgraded. At present, 29 units need to be eliminated and steam heating is open, and no closed printing and dyeing flat washing cylinders have eliminated 24 units, and 83% of the planned tasks have been completed.

In addition, these enterprises also actively eliminate and update production equipment with high energy consumption, high pollution and low output.

At present, 102 sets of old equipment, such as pre-processing equipment, drawing and setting machine, circular flat screen printing machine and continuous dyeing machine, have been eliminated, and 56 units have been updated, and nearly 150 million yuan has been invested.

< /p >

< p > recently, Shaoxing Dongsheng invested more than 100 million yuan to purchase equipment such as shaping machine, dyeing machine and so on.

The company uses a bath dyeing machine with a bath ratio of 1 to 3, which goes far beyond the threshold of setting bath ratio not higher than 1: 8, so that the effluent volume of printing and dyeing effluent is minimized.

At the same time, after printing and dyeing finishing, the company imported international advanced machine from South Korea and other countries.

< /p >

When p is still using the old equipment for production, Haimen Tonghai dyeing and finishing company invested 80 million in the past two years and replaced all the old equipment into the leading equipment of the domestic counterparts.

Among them, the value of over 1 million yuan a set of heat setting machine, sea dyeing and finishing equipped with 16 units.

Qiu Zuxin, chairman of the company, calculated that the old equipment processed 65 meters per minute, and now processed 90 meters per minute.

One day can be processed more than 36000 meters, and production efficiency has been greatly improved.

In the past, at least 2 people were required to see every old equipment. Now it is fully automated, and manpower is greatly reduced, and the cost is greatly reduced.

By updating the equipment, the quality of the products has also been greatly improved.

Now the company sells products directly to supermarkets in Europe, America and other countries.

In the past three years, there have never been any incidents of return, storage, compensation, etc.

It is precisely because of these advantages that others do not have that Tonghai dyeing and finishing Co. will occupy a larger market share in the low a href= "http://www.91se91.com" printing and dyeing industry < /a >.

< /p >

< p > < strong > Development > a href= "http://www.91se91.com" > setting machine < /a > technical pformation market < /strong > /p >

< p > setting machine is one of the main equipment of energy consumption pollution. In order to solve this problem, printing and dyeing enterprises can not only replace the advanced energy saving and environmental protection setting machine, but also choose to pform waste gas into the shaping machine. It is worth noticing that this pformation is also becoming a new development trend.

< /p >

< p > in May this year, Shaoxing County announced the implementation of the "blue sky action" in full implementation. It required that all the more than 1900 sets of shaping machines in the printing and dyeing industry of the county should install waste gas treatment devices and convert all coal-fired boilers into natural gas central heating.

The government has introduced an incentive policy to subsidize 60 thousand yuan for the coal to gas boiler and 10% for the installation of the waste gas treatment plant. At present, the pformation of the "coal to gas" setting machine has been completed and 459 units have been disused, and 550 of the 550 boilers have been discontinued.

As of August 7th, all the machines have already completed the contract, of which 788 have been reformed and the completion rate is over 40%.

Zhu Shengjie, general manager of Shaoxing Xinyuan knitting and dyeing and finishing plant, said that the exhaust gas from printing and dyeing factories mainly refers to the white smoke generated from the evaporation of oil in the process of high temperature setting, commonly known as "white oil". The new device can clean the white smoke released from the shaping machine after cooling.

After treatment, the color and smell of smoke discharged from the steel pipe can be greatly improved.

< /p >

< p > Guangzhou blue torch combustion equipment Co., Ltd. is one of the enterprises engaged in the technological pformation of the shaping machine.

According to the technical personnel of the company, the heat efficiency of the traditional stereotyping machine used for coal heating is only about 80%. After professional technical pformation, using natural gas and all combustible gases, the thermal efficiency is over 98%.

At the same time, due to the constant temperature and high heat utilization rate of the coal heating system, the production efficiency of the setting machine is greatly improved, and the shaping fabric is stable.

In addition, natural gas heating has the characteristics of being opened and ready to use. It is easy to operate, fast heating up, energy saving and reducing sulfur dioxide emissions can meet the national "12th Five-Year" emission requirements.

< /p >

< p class= "MsoNormal" style= "margin: 0cm 0cm 0pt" > span lang= "EN-US" lang= "Microsoft";

< p > < strong > domestic equipment is becoming mainstream. < /strong > < /p >

< p > according to China's < a target= "_blank" href= "http://www.91se91.com/" > textile < /a > machinery and Equipment Industry Association printing and dyeing equipment expert Li Yi, in the past two years, the effect of eliminating backward production capacity has begun to appear in the textile machinery industry.

Although the overall market of textile machinery is not good, some energy saving and emission reduction printing and dyeing equipment has achieved a good market.

For example, the setting machine and rotary screen printing machine are the more popular equipment sold over the past two years.

Textile machinery enterprises also felt this change.

For example, the sales volume of rotary screen printing machine of Fujian dragon company increased by more than 30% over the same period last year.

< /p >

< p > Li Yi said that the main reason for the sale of the machine is that the equipment has adopted some new technologies and has the characteristics of large demand and wide application.

It can not only be used to shape woven fabrics, but also can be used to shape knitted fabrics and non-woven fabrics.

The reason why the rotary screen printing machine is selling well is that the automation level of the equipment is generally improved at present, and the accuracy of the equipment is obviously improved. Even if it is necessary to manually carry out the flower, it will soon be able to achieve the purpose of artificial accuracy.

Fundamentally changed the original manual printing machine may need to waste hundreds of rice cloth to the good flower situation.

At the same time, the energy consumption level and pollution level of these devices have been improved significantly.

< /p >

< p > although the current domestic a href= "http://www.91se91.com" > printing and dyeing enterprise < /a > has no fundamental change in the trust and goodwill of European equipment, but the high price of imported equipment has made many users discouraged.

Li Yi told reporters that the price of a home-made setter is about 1 million 800 thousand yuan, while the same imported equipment can buy about 5000000 yuan, and an imported equipment can buy 3 domestic high-end equipment.

With the continuous improvement of domestic equipment manufacturing technology, it is not particularly high-end. < a href= "http://www.91se91.com" > printing and dyeing products < /a > domestic equipment can be done. Moreover, domestic equipment not only considers actual production conditions, but also has better adaptability, and after-sales maintenance is also more convenient.

This is also one of the reasons why domestic setter equipment has been recognized by domestic customers and has been selling well.

< /p >