Home >
Apparel, Footwear And Other Decorative Hardware Industry Is Expected To Return To Life.
< p > recently, the Third Plenary Session of the eighteenth Central Committee of the Communist Party of China was solemnly held in Beijing. The decision of the CPC Central Committee on several major issues of deepening the reform issued by the CPC Central Committee has made a comprehensive institutional arrangement and deployment for the development of new urbanization from the aspects of household registration system reform, county reform, urban construction investment and financing mechanism, and further proposed that the new urbanization with human core should be promoted. The top-level design of the central government has triggered a positive response from the market to the concept of new urbanization. < /p >
< p > urbanization can be understood as urbanization, which involves major social transformation from small peasant economy to industrial economy, from self-sufficient economy to open economy, from low technology content to new technological revolution. The so-called new urbanization is relative to the old urbanization, emphasizing the concept and behavior of civilization and rational evolution, instead of promoting like the previous big pie, leading to low-level replication and wind up, resulting in great waste of resources. < /p >
The promotion of urbanization is bound to lead to the development of decorative hardware industry. There will be new growth points in the domestic market demand. The assembly of industrial recovery has been sounded, and P is just around the corner. For the decorative hardware industry, the long-awaited new urbanization plan has finally come to the fore. The development of urbanization is to let decorative hardware have great room for development in the next few years. < /p >
< p > 2013 inorganic and isotope mass spectrometry, the State Council's food safety office will pay close attention to the quality of dairy products. In the future, China's < a href= "http://www.91se91.com/news/index_c.asp" > the sensor < /a > the annual increase of 15%. The quantity of tea products in the coming years will be set up by the physical and chemical testing laboratory. The 2013 quarter fourth quarter of the state-owned enterprises will be inoculated with hepatitis B vaccine, and the death case will increase to 8 cases of food station optimization: the most powerful editor of the press: as an electronic component widely used in modern electronic equipment, the annual growth rate of the sensor is over 15, and the output value of the sensor will reach 120 billion yuan in 5 years. "A" In 2013, new social trends emerged in the field of sensors. The equipment and system related enterprises in the world want to establish a social "TrillionSensorsUniverse" that uses 1 trillion sensors every year. < /p >
< p > < strong > the annual increase of sensor in China is 15% < /strong > < /p >.
< p > sensor is the basic product in the electronic information equipment manufacturing industry. It is a special component in the new electronic components. The sensor industry is recognized as a promising high-tech industry at home and abroad. It attracts worldwide attention due to its high technology content, good economic returns, strong penetration and wide market prospects. Driven by the booming market of electronic information industry, China's sensors have formed certain industrial foundation, and have made great progress in technological innovation, independent research and development, achievements transformation and competitiveness, and have made important contributions to promoting the development of national economy. < /p >
< p > China's sensor market has been growing continuously in recent years, and its growth rate is over 15%. In 2012, the four major areas of sensor application in China were industrial control, automotive electronics, communication electronics and consumer electronics, and industrial and automotive electronics accounted for about 42% of the market share. < /p >
< p > according to China's "12th Five-Year plan" for electronic components, China will invest 500 billion yuan in 12th Five-Year, mainly in the field of R & D and industrialization of new electronic components. The plan clearly lists the products and technologies that will be developed in the next 5 years, including the new chip, miniaturization, integration and high reliability electronic components products that meet the development needs of the new generation of electronic machines; the high quality and key electronic components that meet the matching needs of our new transportation equipment manufacturing industry; the electronic components and environmental protection electronic components for the energy saving and environmental protection equipment; the electronic components for the new generation of communication technology; the electronic components for the new energy and smart grid industry; the new electronic component materials and equipment. < /p >
< p > includes sensors based on MEMS technology, gas sensors, flow sensors and humidity sensors for environmental monitoring equipment. In addition, the Ministry of industry and information technology released the "12th Five-Year plan" of the Internet of things in February 2012. It also mentioned the development of micro and smart sensors and wireless sensor networks in key projects. < /p >
< p > the next 5 years will be the 5 year of the steady and rapid development of China's sensor market. Under the impetus of annual growth of over 30%, the scale of China's sensor market in 2014 is expected to reach more than 120 billion yuan. < /p >
< p > < strong > the reason why the sensor revolution is concerned is < /strong > /p >
< p > first, the use of electronic components headed by sensors is biased towards smart phones and functional phones. The growth of electronic components depends on specific application products, and prone to the imbalance between supply and demand. The industry hopes to develop new sources of growth beyond demand and price changes. < /p >
< p > Second, the potential demand of sensors in the field of social infrastructure is soaring. In order to manage and maintain the aging infrastructure properly, there is a global demand for sensors and ICT (information and communication technology). Even in areas such as agriculture and primary industries such as agriculture and circulation, logistics and so on, the demand for sensors has been increasing in order to improve production efficiency and energy efficiency. There are more and more user backup forces for sensors. < /p >
< p > Third, information communication < a href= "http://www.91se91.com/news/index_c.asp" > technology < /a > industry wants to make use of more digital data. Data obtained from sensors will expand the computing and communication requirements. Moreover, if the combination of a large number of sensor data and open data, through IoT and M2M for big data analysis, will produce higher value data. {page_break} < /p >
< p > < strong > the eight trends of sensor industry < /strong > < /p >
< p > 1. Sensor industrialization development mode: we need to accelerate the development of industrial development mode from sensor research to mass production, and take the leapfrog development way of combining independent innovation and international cooperation, making China the largest producer of sensors in the world. < /p >
< p > two, sensor product structure is comprehensive, coordinated and sustainable development. Product varieties should be tilted to high technology and high added value, especially to fill "blank" varieties. < /p >
< p > three, enterprise production scale (annual production capacity) to scale economy or suitable scale economy development. The production scale of the general-purpose sensor with a large quantity of faces will be in the hundreds of millions of years. The production scale of some mid-range sensors will be calculated at an annual output of 10 million (including above). The production scale of some high-grade sensors and special sensors will be several hundred thousand to several million a year. < /p >
< p > four, production pattern to professional development. The connotation of specialized production is as follows: 1. production of sensor categories is few and fine; 2., specialized in producing a certain type of sensor series products needed in a certain application area, so as to gain a higher market share; and 3., specialized production of sensor enterprises. < /p >
< p > five, sensor production technology develops to automation. There are many kinds of sensors and different sensitive materials, which determine the diversity and complexity of sensor manufacturing technology. Looking at the general situation of the sensor process line, most of the processes have achieved single machine automation. However, there are still many difficulties in fully automated production process. It needs to be widely used in the future to use CAD, CAM and advanced automation equipment and industrial robots to make breakthroughs. < /p >
< p > six, the key technology transformation of enterprises should be strengthened from the dependence on imported technology to the absorption and innovation of imported technology. < /p >
< p > seven, enterprise operation should accelerate the development from the domestic market to the international market of two domestic and foreign markets. < /p >
< p > eight, the enterprise structure will develop towards "big, medium and small simultaneous", "collectivize and specialized production coexist". < /p >
< p > now, although the whole < a href= "http://www.91se91.com/news/index_c.asp" > decorative hardware industry < /a > has not yet got rid of the haze weather, but the state vigorously promotes the urbanization construction to release a strong signal bullet, which is bound to be another good development opportunity for the decorative hardware industry, but the whole industry may not be able to settle down and wait for urbanization to release huge energy. The whole decoration and hardware industry must see the dawn of urbanization and save ourselves. In a weak market environment, we should take calmly the situation of the bottom of the valley, and now we must adjust our mind and mentality in order to better assess the situation. < /p >
< p > decoration and hardware industry still has a lot of homework to do. The most urgent thing is to reflect on the development of this industry, how to change the present state and recreate the glory of those years. All these need to be settled down by the decorative hardware industry. Only when a friend knows the other, can he fight all the time, and learn to lend his strength to expand his strength, so as to enrich himself by drawing on the essence of ancient history. The decoration hardware industry is closely related to the urbanization. There is no doubt that the promotion of urbanization is bound to drive the development of the whole industry. The attractive cake is just in front of us. Whether we can eat, eat and eat can depend on our own skills. < /p >
< p > this conference on the development of urbanization policy, for decorative hardware industry, there will be future investment opportunities. < /p >
< p > urbanization can be understood as urbanization, which involves major social transformation from small peasant economy to industrial economy, from self-sufficient economy to open economy, from low technology content to new technological revolution. The so-called new urbanization is relative to the old urbanization, emphasizing the concept and behavior of civilization and rational evolution, instead of promoting like the previous big pie, leading to low-level replication and wind up, resulting in great waste of resources. < /p >
The promotion of urbanization is bound to lead to the development of decorative hardware industry. There will be new growth points in the domestic market demand. The assembly of industrial recovery has been sounded, and P is just around the corner. For the decorative hardware industry, the long-awaited new urbanization plan has finally come to the fore. The development of urbanization is to let decorative hardware have great room for development in the next few years. < /p >
< p > 2013 inorganic and isotope mass spectrometry, the State Council's food safety office will pay close attention to the quality of dairy products. In the future, China's < a href= "http://www.91se91.com/news/index_c.asp" > the sensor < /a > the annual increase of 15%. The quantity of tea products in the coming years will be set up by the physical and chemical testing laboratory. The 2013 quarter fourth quarter of the state-owned enterprises will be inoculated with hepatitis B vaccine, and the death case will increase to 8 cases of food station optimization: the most powerful editor of the press: as an electronic component widely used in modern electronic equipment, the annual growth rate of the sensor is over 15, and the output value of the sensor will reach 120 billion yuan in 5 years. "A" In 2013, new social trends emerged in the field of sensors. The equipment and system related enterprises in the world want to establish a social "TrillionSensorsUniverse" that uses 1 trillion sensors every year. < /p >
< p > < strong > the annual increase of sensor in China is 15% < /strong > < /p >.
< p > sensor is the basic product in the electronic information equipment manufacturing industry. It is a special component in the new electronic components. The sensor industry is recognized as a promising high-tech industry at home and abroad. It attracts worldwide attention due to its high technology content, good economic returns, strong penetration and wide market prospects. Driven by the booming market of electronic information industry, China's sensors have formed certain industrial foundation, and have made great progress in technological innovation, independent research and development, achievements transformation and competitiveness, and have made important contributions to promoting the development of national economy. < /p >
< p > China's sensor market has been growing continuously in recent years, and its growth rate is over 15%. In 2012, the four major areas of sensor application in China were industrial control, automotive electronics, communication electronics and consumer electronics, and industrial and automotive electronics accounted for about 42% of the market share. < /p >
< p > according to China's "12th Five-Year plan" for electronic components, China will invest 500 billion yuan in 12th Five-Year, mainly in the field of R & D and industrialization of new electronic components. The plan clearly lists the products and technologies that will be developed in the next 5 years, including the new chip, miniaturization, integration and high reliability electronic components products that meet the development needs of the new generation of electronic machines; the high quality and key electronic components that meet the matching needs of our new transportation equipment manufacturing industry; the electronic components and environmental protection electronic components for the energy saving and environmental protection equipment; the electronic components for the new generation of communication technology; the electronic components for the new energy and smart grid industry; the new electronic component materials and equipment. < /p >
< p > includes sensors based on MEMS technology, gas sensors, flow sensors and humidity sensors for environmental monitoring equipment. In addition, the Ministry of industry and information technology released the "12th Five-Year plan" of the Internet of things in February 2012. It also mentioned the development of micro and smart sensors and wireless sensor networks in key projects. < /p >
< p > the next 5 years will be the 5 year of the steady and rapid development of China's sensor market. Under the impetus of annual growth of over 30%, the scale of China's sensor market in 2014 is expected to reach more than 120 billion yuan. < /p >
< p > < strong > the reason why the sensor revolution is concerned is < /strong > /p >
< p > first, the use of electronic components headed by sensors is biased towards smart phones and functional phones. The growth of electronic components depends on specific application products, and prone to the imbalance between supply and demand. The industry hopes to develop new sources of growth beyond demand and price changes. < /p >
< p > Second, the potential demand of sensors in the field of social infrastructure is soaring. In order to manage and maintain the aging infrastructure properly, there is a global demand for sensors and ICT (information and communication technology). Even in areas such as agriculture and primary industries such as agriculture and circulation, logistics and so on, the demand for sensors has been increasing in order to improve production efficiency and energy efficiency. There are more and more user backup forces for sensors. < /p >
< p > Third, information communication < a href= "http://www.91se91.com/news/index_c.asp" > technology < /a > industry wants to make use of more digital data. Data obtained from sensors will expand the computing and communication requirements. Moreover, if the combination of a large number of sensor data and open data, through IoT and M2M for big data analysis, will produce higher value data. {page_break} < /p >
< p > < strong > the eight trends of sensor industry < /strong > < /p >
< p > 1. Sensor industrialization development mode: we need to accelerate the development of industrial development mode from sensor research to mass production, and take the leapfrog development way of combining independent innovation and international cooperation, making China the largest producer of sensors in the world. < /p >
< p > two, sensor product structure is comprehensive, coordinated and sustainable development. Product varieties should be tilted to high technology and high added value, especially to fill "blank" varieties. < /p >
< p > three, enterprise production scale (annual production capacity) to scale economy or suitable scale economy development. The production scale of the general-purpose sensor with a large quantity of faces will be in the hundreds of millions of years. The production scale of some mid-range sensors will be calculated at an annual output of 10 million (including above). The production scale of some high-grade sensors and special sensors will be several hundred thousand to several million a year. < /p >
< p > four, production pattern to professional development. The connotation of specialized production is as follows: 1. production of sensor categories is few and fine; 2., specialized in producing a certain type of sensor series products needed in a certain application area, so as to gain a higher market share; and 3., specialized production of sensor enterprises. < /p >
< p > five, sensor production technology develops to automation. There are many kinds of sensors and different sensitive materials, which determine the diversity and complexity of sensor manufacturing technology. Looking at the general situation of the sensor process line, most of the processes have achieved single machine automation. However, there are still many difficulties in fully automated production process. It needs to be widely used in the future to use CAD, CAM and advanced automation equipment and industrial robots to make breakthroughs. < /p >
< p > six, the key technology transformation of enterprises should be strengthened from the dependence on imported technology to the absorption and innovation of imported technology. < /p >
< p > seven, enterprise operation should accelerate the development from the domestic market to the international market of two domestic and foreign markets. < /p >
< p > eight, the enterprise structure will develop towards "big, medium and small simultaneous", "collectivize and specialized production coexist". < /p >
< p > now, although the whole < a href= "http://www.91se91.com/news/index_c.asp" > decorative hardware industry < /a > has not yet got rid of the haze weather, but the state vigorously promotes the urbanization construction to release a strong signal bullet, which is bound to be another good development opportunity for the decorative hardware industry, but the whole industry may not be able to settle down and wait for urbanization to release huge energy. The whole decoration and hardware industry must see the dawn of urbanization and save ourselves. In a weak market environment, we should take calmly the situation of the bottom of the valley, and now we must adjust our mind and mentality in order to better assess the situation. < /p >
< p > decoration and hardware industry still has a lot of homework to do. The most urgent thing is to reflect on the development of this industry, how to change the present state and recreate the glory of those years. All these need to be settled down by the decorative hardware industry. Only when a friend knows the other, can he fight all the time, and learn to lend his strength to expand his strength, so as to enrich himself by drawing on the essence of ancient history. The decoration hardware industry is closely related to the urbanization. There is no doubt that the promotion of urbanization is bound to drive the development of the whole industry. The attractive cake is just in front of us. Whether we can eat, eat and eat can depend on our own skills. < /p >
< p > this conference on the development of urbanization policy, for decorative hardware industry, there will be future investment opportunities. < /p >
- Related reading
Energy Saving And Emission Reduction To Promote Hardware And Software Upgrading In Footwear Industry
|
2013/12/25 14:47:00
27
- Shoe Market | Fake And Inferior Products Are Attached To Famous Brand Shoes And Brand Shoes To Turn Into "Famous Brand Shoes"
- Recommended topics | The Core Of Clothing Inventory Management Is To Reduce Clothing Inventory Instead Of Handling Garment Inventory.
- Regional policy | 杭州《余杭家紡聯盟標準》推廣實施 成為我國首個地方家紡行業標準
- News Republic | Online Shopping Mode Diversified Traditional Clothing Enterprises Try Water O2O
- Expo News | Australian Fashion Week: Print And Soft Colors Become The Specialty Of The Show.
- Shoe Market | Children'S Shoes And Clothing Market Is Large And Homogeneous.
- News Republic | Clothing Problems Frequently Appear. The New National Standard Of Clothing Will Be Enforced In August.
- News Republic | The Prospect Of Infant Clothing Market Is Excellent.
- Industry Overview | How To Build A Textile Powerhouse: What Has Been Missing In The Past 10 Years?
- Regional policy | In August This Year, China'S First Child Furniture Regulations Will Be Implemented To Protect Children'S Healthy Growth.
- Experts Predict That The Era Of Comprehensive Risk Management In The Silk Industry Has Arrived.
- 2013 Dalian International Fashion Festival
- 2013年前10月棉紗進出口雙增長
- 我國五金行業外向型發展特征日漸明顯
- Energy Saving And Emission Reduction To Promote Hardware And Software Upgrading In Footwear Industry
- Tips For Interpersonal Communication
- Monthly Report On Cotton Market In November 2013
- There Is Always A Good One For You: Different Skills, Rich Display Of Different Clothing Stores.
- Teach You A Few Tricks Of Winter Clothing Display Skills
- "Fast Fashion" Clothing Comparison Test 64% Sample Clearance