The SIASUN Dryer And The New Shrink Machine Have Been Developed.

Germany Brukner recently launched the new POWER-RELAX pine. Dryer 。 This machine is suitable for plain knitted fabric and cylinder knitted fabric.

The POWER-RELAX loosening dryer is divided into 3 layers, the first layer is the high-performance pre drying area (suction drying room), the second and third layers are highly efficient drying and tumbling relaxation zones. Compared with the conventional drying room with the traditional impingement nozzle, the upper part of the dryer is the suction drying room, which can save 25% of the heat energy. Because the temperature of the drying zone and the intensity of the air flow through the nozzle can be set according to the process, it can save 5% extra energy. If the heat recovery system is installed, the energy saving can be saved by 5% on the basis of the original heat recovery system.

The machine has a long time. Drying path of fabric And the process time, it can get a better fabric shrinkage value; the temperature of each drying zone and the intensity of the air flow through the nozzle are set according to the high accuracy of the process, so that the quality of the fabric can be improved and the yellowing phenomenon of the fabric can be avoided.

It uses the Brukner Split-Flow shunt technology, and the temperature sensitive fabric such as viscose fabric can be controlled by an independent hot air circulation system in each half box drying room in order to obtain higher temperature accuracy.

Italy hair road company recently developed a new shrink machine. The pre shrinking machine is composed of a cloth feeding device with pre steaming and wet feeding, an automatic alignment device, an automatic or manual weft straightening device, a stainless steel tending device with a strong steaming unit, a new pre shrinking unit, a non-stop inspection table, a simple or precise stacking, a A rack rack, an automatic or semi-automatic packaging unit, and a bar code label device.

New pattern Pre shrinking machine The vertical rotary stainless steel needle plate conveyor chain with differential control can be used to control the width of the plain knitted fabric and to correct the weft insertion.

It uses a strong suction steam to wet system, so that the fabric fiber can be fully expanded; the wet system is made of stainless steel structure, and the wet door width can be adjusted according to the width of the fabric.

The machine controls the tension of knitted fabrics through load sensors and electronic devices; the specially developed elastic blanket ensures a good pre shrinking effect. The large diameter finishing roller can be used for the heat setting treatment of knitted fabrics, and the continuous cloth winding or simple control method with cloth inspection platform is adopted.

The machine has selectable devices such as pulp edge, edge drying and trimming device, automatic photoelectric weft straightening device, etc. the calender rolls have metal roller and metal roller, metal roll matching table, polyamide fiber roller and so on.