Home >

Aiming At Market Demand And Timely Launching Constant Tension Hanger

2014/6/26 8:06:00 18

Market Demand Hanging Spindle Textile Machinery

in recent years, with the continuous improvement of "a href=" http://www.91se91.com/news/index_c.asp "spinning" /a "counts and yarn quality, textile enterprises are increasingly strict in lifting spindles.

The original roving tension is consistent when using ordinary hanging spindles and big yarns. But when small or medium yarns are used, the quality of the bobbins will change, and the roving will be tightened to loose and even produce sliver.

Wang Pingzu said that this is due to the uneven weight of roving from large to small, which not only causes unexpected drafting, but also has spindle deviation.

in view of this situation, the spinning enterprise proposes that the hanging spindle must be consistent with big yarn, middle yarn and small yarn roving, that is to say, when the weight of the bobbin changes, roving must not change, including 420 spindles, each roving tension should be consistent.

"if you want to achieve every a href=" http://www.91se91.com/news/index_c.asp "> tension < /a > uniform, then there is only constant tension hanging spindle.

Wang Pingzu said that the development of constant tension ingots did not cause enough attention from the Tong long textile machinery company. However, with the market changing, they found that developing constant tension ingots is not only an urgent need for textile enterprises, but also a powerful weapon for the production of hanging spindles themselves to base themselves on the market.

As a result, they invited experts to carry out detailed technical argumentation, and all the technical forces of the organization developed automatic constant yarn tension hanger in 2011.

The hanging spindle can automatically adjust the yarn tension to a constant value, which can fundamentally eliminate the phenomenon of long detail yarn defects and roving falling.

Wang Pingzu said, at present, the company's constant tension < a href= "http://www.91se91.com/news/index_c.asp" > hanging spindle < /a > has been running in the user enterprise for 4 years. From the effect of use, there is no spindle difference between the roving roving and roving, the tension of the large, medium and small yarns is the same, and the maximum tolerance range is below -0.1 micron.

commitment downstream user /p >

three years can be maintained free of charge .

Jiangyin tonglong textile machinery company has entered the hanging spindle industry for more than ten years. It enjoys considerable popularity in the industry. Its production hangs for Shanxi's Hongji, Jingwei, Changzhou Tonghe and 4806 companies and other domestic key spinning machine manufacturers. Dezhou's one cotton, Weifang Haitian, Fujian jioda, Hubei INTERCHINA 3542, Ningbo Bailong and other well-known cotton textile enterprises are also their key users.

"nevertheless, we still feel the pressure of competition in the industry is very great. There are only 15 enterprises in Jiangyin.

Wang Pingzu said that although competition has depressed the profits of enterprises, they do not dare to slack off in new product development, product quality and after-sales service.

the service life of hanging spindles is usually 5~6 years. According to Wang Pingzu's experience in the user enterprise inspection for many years, when the hanging spindle has been used for 3 years, though it can still be used, the quality of spinning has begun to drop.

Therefore, he suggested that after 3 years' use, the spinning enterprises must be unloaded for one maintenance. After the maintenance, there will be no problem in the 3 years.

Tong long textile machinery company also promised to customers: Hang ingot can enjoy free maintenance after 3 years.

This not only prolongs the service life of the hanging spindle, but also improves the spinning quality.

enterprise future planning

quality first stable development .

in order to ensure the quality of products, the polyoxymethylene materials used for the production of hanging spindles from Tong Long Textile Machinery Company are all imported from Korea, and the price per ton is 2800 yuan higher than the domestic price.

Wang Pingzu said, because the hanging ingot can not be refueling, and the hanging spindle needs toughness, strength and flexible rotation, which means that the material requirements are very high.

Therefore, if we want to produce high quality hanging spindles, we have to invest in materials.

Wang Pingzu said that the strict control of product quality by Tong long textile machinery company not only earned them high praise from customers, but also harvested export orders, which they sold to 20 thousand ingots in India market last year.

"P >" domestic has 130 million spindles at present, and the replacement period of hanging spindles is about five or six years.

Therefore, the market space of hanging ingot is very large, and the tip of iceberg is enough for us to eat.

When it comes to enterprise development planning, Wang Pingzu said.

Although the market is large, they say they will not blindly expand the scale of production.

at present, Tong Long spinning machine company sells about 2 million spindles each year, which will basically maintain such a scale in the future.

In Wang Pingzu's view, the quality of products will be threatened once the scale is enlarged blindly and the training of workers can not keep up.

hanging spindles, on the one hand, are matched with the main engine, but the quantity is rather limited. More orders come from the renovation and pformation service of textile enterprises.

"Therefore, we must rely on advanced technology, high standard product quality and good after-sales service to maintain a stable customer team, firmly in order to update these enterprises orders."

Wang Pingzu said.

It is precisely because of adhering to advanced technology, high quality products and good service that Tong long textile machinery has achieved today's performance.