Introduction To The Quality Inspection Of Shoes And The Characteristics Of Genuine And Fake Leather

How to distinguish the quality of leather shoes produced by shoemaking equipment?

1. Inspection of sole (sole store) materials mainly include rubber, plastic, rubber and plastic, materials, polyurethane, natural leather, etc. When purchasing, check the flatness of the big bottom, the clarity of the patterns, use the nails to press the soles lightly, be flexible, not so hard, and will not peel off. Otherwise, it is the lower rubber content of the sole, too much use of reclaimed rubber filler, easy to break, and not durable.

Two, the heel inspection should be installed firmly and smoothly, and the hand will not be deformed or loosened. Middle and high-heeled shoes pay more attention to the identification of heel quality, put the shoes on the counter smoothly, and the heel face can fully touch the table, and the hands do not shake; the height of the heel should be consistent with that of the two heels.

Three, the check of hook is an important accessory that is set up between the outsole and the bottom of leather shoes, and can not be seen from outside. When choosing, the shoes are put on a firm table, and the center of the hook is pressed hard. On the contrary, it indicates that the quality of hooked heart is poor. After wearing, the lumbar part will be convex or concave, which will make the foot feel uncomfortable, and it will hurt if walking.

　　 Genuine leather Leather characteristics:

1. pigskin leather shoes: Pig leather granules round and thick pores, sloping into the leather, the pores on the grain surface are arranged in three groups, forming a triangular pattern with uneven grain and special patterns. Pig leather has excellent wear resistance.

2. yellow cattle leather shoes: the pores on the grain surface of the cattle leather are round, and they really extend into the leather. The pores are distributed evenly on the leather surface evenly and evenly.

3. buffalo leather shoes: Buffalo Leather granules round and thick pores, and straight into the leather, the number of pores is less than that of yellow cattle leather, evenly distributed on the leather surface, the grain is uneven and rough. Wear resistance is poor, but tensile strength is high, so it is suitable for all kinds of mechanical wheel leather.

4. horse hide leather shoes The pores of the granules are oval, larger than the pores of yellow cattle skin, and they are more inclined into the leather. The pores are arranged regularly, forming a mountain like shape, and the quality of the leather is looser than that of the yellow cattle leather.

5. sheepskin leather shoes: granule pores flat surface, more inclined into the leather, pores a few groups, arranged like scales or zigzag shape, sheep leather surface is fine and smooth, goat leather is more clear than sheep leather pores, elastic and elastic.

False leather characteristics:

1. fake leather: synthetic leather and synthetic leather, characterized by no pores. "Imitation sheepskin" and other synthetic leather, no matter how many images are imitated, can be seen after careful observation.

2. odour: fake leather has a smell of plastic cloth and no smell of hair when burning.

3. identification: when you get your leather shoes, press your fingers to the edge of the upper part of the shoe near the sole. If it is cowhide, it will appear tiny wrinkles. When the fingers are released, the wrinkles will naturally disappear. But synthetic leather will not happen.

There are 4 ways to solve the problem when shoes are rubbed feet:

1, put a band aid on the back of the foot or the foot of the shoe to relieve the direct friction between the shoes and the skin.

2. Apply the cream on the foot of the new leather shoes, or dry it with a wet napkin, then thoroughly soak the liquor, and use a clip to fix it on the grinding foot. After a night, it can soften the skin.

3. shoes Because it is too small and pinch, it may be wet with a wet towel, then wedge up with shoes, and it will be comfortable to wear.

4. Wear the feet at the edge of the shoes. Cover them with wet towels for a few minutes to soften the damp. Then roll the glass cylinders and other cylindrical objects for several times.