Enterprise Pformation Is Inseparable From Advanced Environmental Awareness And Pollution Control Level.

At the beginning of the new year, the printing and dyeing enterprises in Shishi, Fujian province basically completed the recruitment in spring within 1~2 days.

Local

This year, the number of old workers returning to factories is the highest in the past few years. Technical personnel and technical workers in the first-line positions of printing and dyeing enterprises have all been put in place.

In many areas, the high pollution characteristics of the printing and dyeing industry have become a factor that puzzles the development of enterprises.

The printing and dyeing enterprises in Shishi have achieved green pformation through advanced environmental awareness under the collapse of energy conservation and emission reduction.

Enterprise pformation is inseparable from advanced environmental awareness and pollution control level.

In China

In the survey of the energy saving and emission reduction and circular economy research group of the Federation of industry and commerce, it was found that the 3 printing and dyeing industry centralized control zones, which are about 20 minutes away from Shishi City, have good environmental quality.

Here near the sea, the air is clean, the streets are clean, and all the printing and dyeing enterprises can not see a chimney, which makes people feel that this is an industrial area.

In fact, since 2015, the low temperature, low pressure and medium temperature medium pressure steam needed by the dyeing and finishing enterprises in Shishi three major printing and dyeing areas have been fully supplied, and the printing and dyeing enterprises have completely eliminated their own coal-fired boilers and chimneys, and dyeing and finishing enterprises have been in the forefront of the country in energy conservation and emission reduction.

According to statistics, Shishi's three major printing and dyeing control zones have eliminated 111 coal-fired steam boilers in 62 enterprises, leading the construction of a new circular dyeing and finishing industry development park without coal-burning boilers and chimneys in the whole country.

The local environmental protection department official said that the Shishi printing and dyeing industry was aware of the pollution problem at the beginning of its development.

In 1993, the first sewage treatment plant of Shishi was formally built, and the daily sewage treatment capacity was 70 thousand tons.

Since then, the newly opened printing and dyeing factory has been built in accordance with the sewage treatment plant. With the geographical advantages of Shishi Peninsula, the sewage produced in the production process of the enterprise has been discharged through deep-sea treatment after reaching the standard, and the enterprise only needs to pay a certain amount of sewage treatment fee.

When the Cheung Chi sewage treatment plant is about to become saturated, the government of Shishi will build two sewage treatment plants in Hongshan Town and Jin Shang Town along the coast. The daily sewage treatment capacity is 9 million tons and more than 8 million tons.

In this way, the three major control zones of the Shishi printing and dyeing industry, which centers on the three sewage treatment plants, have been formed.

At present, the waste water treatment work of dyeing and finishing enterprises around the centralized control area is undertaken by Haitian Environmental Engineering Company. On the monitoring equipment of the company, we can see that the treated wastewater COD is stable at 80mg/L, reaching the standard requirement of direct discharge.

According to the person in charge of Haitian environmental company, in July 2015, Shishi dyeing and printing first built a "credit card" sewage system, and formed a comprehensive evaluation mechanism of tax, energy conservation and emission reduction contribution.

The "credit card" sewage discharge is strict total control and discharge permit. Based on the establishment of the supervision method of the factory boundary outlet, the quota automatic management system is set up, and the quota management is strictly regulated, the illegal emissions are eliminated, the clean production is fully implemented, and the discharge of main pollutants is reduced.

For example, a company's emissions amount ahead of the total monthly emissions, and the valve will be forced to shut down, thereby closing down the enterprises to increase production without increasing pollution.

It can be said that the printing and dyeing industry in Shishi has begun to reduce the amount of industrial pollution emissions from the centralized discharge of industrial waste water, the reuse of recycled water, the centralized heating of industrial steam and the treatment of exhaust gas from stereotypes.

Energy saving and emission reduction rely on equipment pformation, new technology import and meticulous management.

Hong Kong overflow dyeing and finishing Weaving Co., Ltd. is a local company producing pure cotton, polyester cotton.

In the past two years, the output of the dyeing and finishing enterprises is also declining due to the poor economic situation, but the situation has improved since the start of this year.

A large LCD screen on the production site of Hong Kong overflow company shows the consumption data of water, electricity and steam.

According to the person in charge of the company, this is the newly installed online energy consumption monitoring equipment, which has played a great role in energy saving, emission reduction and staff assessment.

In the future, intelligent on-line monitoring should also be developed.

Xianghua Group Co., Ltd. is a local printing and dyeing enterprise, mainly engaged in pure cotton, polyester cotton, polyester, spandex and other woven, knitted high-grade fabric products dyed, brushed, finalized, after finishing production and processing services.

In terms of energy saving and emission reduction, the company mainly relies on equipment pformation and elimination of backward equipment; new technologies, new dyes and new auxiliaries are introduced; fine refinement management and performance appraisal are introduced.

Crown Hong Limited by Share Ltd focuses on the development, production and sales of functional clothing fabrics, with relatively high product quality.

The company responsible person said that with the increasingly stringent environmental requirements, the production of low value-added products has no room for survival, we must develop high-end high-end market.

He realized that only controlling the processing links was not enough. Future development must have its own channels.

The company is experimenting with business model innovation, utilizing overseas relations, setting up offices in Hongkong, independently placing orders on the international market and developing business channels.

At present, the company has developed high elastic polyester spandex products, high elastic polyester nylon fabric, has formed large-scale production, and products are mostly exported.

Chen Zhihua, President of China printing and dyeing industry association, believes that such a mode is difficult to start, but it is difficult to take this step. This is the upgrading road of Shishi printing and dyeing fabric enterprise.