Accounting: How To Find Errors

In daily accounting, mistakes happen frequently.

If a mistake is found:

First, confirm the amount of mistake.

The two is to confirm whether it is wrong in the debtor or the lender.

The three is to analyze the causes of possible errors based on the specific circumstances of errors, and adopt corresponding search methods, so as to shorten the time of finding errors and reduce the workload of checking accounts.

There are many ways to find errors. Several commonly used methods are introduced as follows:

(1) check up method (also known as positive search method).

The checking method is a method to find out the whole process of the original voucher, account book and compiling accounting report according to the order of account processing.

That is to say, first check whether the credentials are correct, then check the bookkeeping vouchers, the original vouchers with the relevant account books, and check the amount and balance of the accounts concerned.

This kind of examination method can be found to remember, miss, wrong subjects, wrong amount and so on.

The advantage of this method is that the scope of the check is large and it is not easy to omit. The drawback is that the workload is heavy and the time needed is relatively long.

Therefore, in practice, we usually use other methods to find out the error.

(2) reverse method (also called reverse checking).

This method is contrary to the checking method. It is a method to find out the process of accounting statements, account books and original vouchers according to the order of accounts processing.

That is to say, check the balance of the account concerned first, then check the relevant books in the order of records, check with the relevant bookkeeping vouchers or original vouchers one by one, and finally check the correctness of the accounting vouchers.

The advantages and disadvantages of this method are the same as that of the check method.

The difference is based on the actual needs of work, and for some reason, the possibility of errors in the later stage is greater.

(3) spot check method.

The spot check method is a method to extract part of the account bookkeeping records.

When errors occur, they can be segmented and focused on specific circumstances.

Check a part of account records with relevant bookkeeping vouchers or original vouchers.

It can also be searched according to the number of errors.

If the error is an angle or a division, it is only necessary to find the following mantissa; if the error is the thousand bits and tens of thousands of integers, it is only necessary to find thousands or tens of digits. Other bits should not be searched one by one or one by one.

The advantage of this method is that the scope is small, and it can save time and reduce workload.

(4) even legal.

Coincidence is a way to find out the records that are often encountered in an error, and to infer records related to errors.

This method is mainly applicable to finding missing, re recording, and incorrect records.

(1) search for missing entries.

A. the general ledger is missing. When the trial balance is in equilibrium, the amount of imbalance between the borrowers and the debits occurs. When the general ledger and the subsidiary ledger are checked, it will be found that the amount of the total amount of the borrower (or loan) that is accumulated by a borrower in a general ledger is larger than that of the general ledger, and there is a difference between the two loans.

Moreover, there is an amount equal to the difference between the general ledger and the subsidiary ledger, which indicates that the borrower or the loan of the general ledger is missing.

B. a detail account is omitted, and it can be found when checking the general ledger and the subsidiary ledger.

The general ledger has been trial balanced, but when checking the general ledger and the subsidiary ledger, it is found that the sum of the amount borrowed or borrowed by a general ledger is larger than the sum of the amount of borrowed (or loan) of the subsidiary ledger, which indicates that one side of the account may be omitted, and the relevant credentials of the subsidiary ledger can be checked.

C. if the bookkeeping credential is missing, there is no obvious error feature, and only by checking or checking the method.

Second, repeat the search.

A. the general ledger is memorizing.

When trial balance is in equilibrium, there is an imbalance between the borrowers and the two parties. When the general ledger and the subsidiary ledger are checked, it will be found that the sum of the total amount of the borrower (or the loan) party who has the sum of the account of a general ledger is less than the total amount of the loan account. There is a difference between the two loans.

There is a record of the amount equal to this difference, which indicates that the general ledger borrows (or the loan) side to remember, which side of the loan (or loan party) has a large sum and to remember where it is.

B. if the subsidiary ledger is re recorded, it can be found in the check of the general ledger and the subsidiary ledger.

The general ledger has been trial balanced. When the sum of the account receivage is less than that of the subsidiary ledger, the sum of the sum of the borrowed (or the loan) side of the subsidiary ledger may be a duplicate of the subsidiary ledger, and the check voucher related to the subsidiary ledger can be checked.

C. if there is no obvious error feature in the whole bookkeeping certificate, it can only be found by using the check method or the reverse method.

Third, record the search of the reverse account.

Reverse accounting means that in the time of bookkeeping, the amount of the occurrence of the mistake is mistaken, the amount of the debtor is credited, or the amount of the credit is recorded into the debtor.

When the general ledger records an account, the balance between the borrowers and the borrowers is found to be uneven when the trial balance is in equilibrium.

The difference is even, can be divisible by 2, and the quotient obtained is recorded in the account book. If the debtor is greater than the lender, it means that the lender is wrongly recorded as a borrower. Otherwise, it indicates that the borrower is wrongly credited as the lender.

If the subsidiary ledger is reversed and the general ledger record is correct, the trial amount of the general ledger is correct. It can be found by checking the general ledger and the subsidiary ledger.

4. Search for wrong accounts.

In practical work, erroneously bookkeeping refers to the wrong number. There are two common ones.

The first is digital dislocation, that is, the number of digits should not be moved forward or backward, or small or big.

For example: turning the thousand digit into a hundred digit (big decrease), 1600 is remembered as 160 (big change small), or the hundred digit becomes the thousand digit (small to become big), 3.43 writes 243.

If it is large, the difference between the correct number and the wrong number is a positive number in the trial balance or the general ledger and the subsidiary ledger. The difference between the sum and the wrong amount after 9 is exactly the same.

If the balance can be divided by 9 when checking accounts, the number of traders is exactly the number of accounts, and may be mistaken.

If it is small, the difference between the correct number and the error number is a negative number in the trial balance or the general ledger and the subsidiary ledger. The sum of the difference divided by 9 is multiplied by 10, and the absolute number obtained is exactly the same as that on the account.

The check should be followed: the negative number is divided by 9, the quotient is multiplied by 10 of the number of accounts, and may be mistaken.

Second,

。

Error is the wrong number in the process of registering books.

For mismatch lookup, we can determine the search method separately according to the difference formed by the wrong record. When searching, we should not only find the amount of occurrence, but also look for the balance.

In general, the difference formed by simultaneous mistake is the following:

First, the number of neighbors is reversed.

The inversion of adjacent numbers refers to the exchange of two adjacent figures when registering the account books.

For example, 43 mistake 34, or 34 mistake 43., if the former is small and the other is small, the difference between the correct number and the error number is positive when the trial balance is balanced. The difference between the correct number and the error number after the 9 is equal to the difference between the adjacent inverting two numbers, and is less than 9. can be found in the range of two adjacent numbers with the same difference.

If the former is turned upside down, the balance between the correct number and the error number is negative when the trial balance or general ledger and subsidiary ledger are accounted for.

Under the above circumstances, the difference can be divided by 9 while the effective number is only 9.

For example, the total balance of accounts receivable of an enterprise should be 881.34, while the total amount of the ledger is 944.34, and the general ledger and the subsidiary ledger are not equal.

The details of the subsidiary ledger are as follows: table 1-6., table 1-6, serial number, the amount of the account name (10000 yuan), 1 A 623.452 B 103.683 C 45.794 D 81.185 E 90.24 total 944.34 search steps:

First, get the positive error value: 881.34 - 944.34=-63 yuan.

Second, to judge whether the difference can be divided by 9, the difference is 63, which can be divisible for 9 (630 thousand yuan /9=7 yuan).

Third,

-63/9=-7. fourth, in the error table to find whether there is a difference between adjacent numbers of 7.

When the difference coefficient is negative, it will be smaller before checking.

According to the survey, the "8" - "1" =7 in the fourth row of "81.18" in the table is smaller than before.

It can be judged that it belongs to the error of digital inversion, that is, it may be 18.18 and is mistakenly written as 81.18. fifth. The fourth rows should be recombined by 18.18 corrections, and the total number is 881.34, which is consistent with the general ledger.

Two, digit inversion.

Such as: 425, 524701, 107, etc., the effective number of the difference generated by this inversion is more than three, and the middle number must be 9. The difference is 9, except that the quotient must be the same number as two, such as 22, 33, 34...

The 1 number in the quotient is exactly the difference between the two alternate numbers.

For example, if 802 errors are recorded in 208 yuan, the difference is 594, and the difference between 9 and 9 is 66. The difference between two inverted numbers 8 and 2 is 6., so the nearest neighbor digit inversion error search method can be used to find the difference between the number of hundred bits and two digit positions in the book record, 6 or 600, that is, 600 and 600, and the number of points, and, and, and the number of the group of 3O9 will be detected.

When adopting the above methods, we should pay attention to the following aspects: first, correctly choose the base as the comparison standard; two, ensure the comparability of the contrast index; three, analyze the change of the relative number and the absolute number at the same time, and calculate the influence on the total amount.