Direct Spinning Machine Exhibition Lida Group: A New Image With You "Digital" Exhibition.

In October 15, 2018, on the day of ITMA ASIA + CITME 2018, Lida Group held "RieterDigital Day" (Lida digital activity day).

Mr. Norbert Klapper, Chief Executive Officer

Taking the customer of the UPtime system as an example, this paper explains how these technologies make the spinning process digitalized.

At the same time, it analyzes the challenges involved in digitalization and points out the way forward for Lida Group.

Norbert introduced that Li Da has always attached great importance to customer needs and listened attentively to customer feedback. Among them, low yarn profit, shortage of professional personnel and shortage of operational workers are the main problems facing spinning mills.

The three demands of spinning customers are exactly what they want to solve when they are seeking new technology.

And Lida's equipment is to satisfy these needs of customers, so as to solve the problem of short efficiency resulting from its spinning process.

How to control costs and benefits and ensure that enterprises can make profits is the key to implementing intelligent manufacturing.

Intelligent manufacturing is not suitable for all enterprises. Intelligent manufacturing requires enterprises to decide according to their actual conditions.

In this regard, Norbert has made good suggestions for China's spinning enterprises. "At present, China's spinning mill is not very objective.

First of all, China's labor costs are increasing, and China's labor costs are quite high compared with other Asian countries.

This is also a concern for China's spinning mills.

Secondly, in March this year, when the government stopped subsidies to the spinning mills in Xinjiang, the profits of the spinning enterprises were also reduced.

Once again, our Chinese customers are heading for the United States.

In view of these three reasons, our Chinese customers tell us that they need to invest in factory automation, digitalization and efficiency improvement.

To solve the problem of short board with low efficiency, it is necessary to upgrade and upgrade existing equipment for higher productivity and higher quality.

This is how we help Chinese customers to remain competitive.

Lida has always been concerned about the development of textile technology, the goal is to lead the development of the whole industry, and the next goal is to achieve the digitalization of spinning.

Because Lida equipment not only covers pre spinning preparation, but also the only supplier and supplier of four spinning technologies.

At the same time, Lida also has service, R & D, production and quality experts.

Lida's professional technology in the spinning field, combined with digital technology, will surely bring considerable benefits to our customers.

Mr. Huang Wei, director of Lida China market and communications department, then introduced the layout characteristics of Lida exhibition booth to the media. On the exhibition stand, the 4 spinning technologies of Lida have 4 corresponding touch screens to reflect some characteristics of the spinning system equipment, and selected some practical cases to show the customers.

There are also 3 touchscreens that display digital technology for Lida, the Essential digital spinning suit, the UPtime and the SPIDERweb.

Among them, the Essential digital spinning suit is new.

Lida has three business groups, including the whole machine, special parts and after sales. This year, the three business segments have been unveiled for the first time in a unified overall image.

Compared with previous exhibitions, the biggest change this year is the display of "digitalization", without a large number of machine displays. Instead, it is a large number of screens. There are 7 65 inch 4K touchscreens, 4 LED screens, and many screens of different sizes.

Huang Wei said that perhaps this is a development direction of the future textile machinery exhibition.

L new digital platform - Essential digital spinning set

Lida has introduced a new Essential digital spinning platform, and has written a new chapter in the digital field of spinning factory.

The operation and control of the spinning plant can be completed by clicking operation. This platform makes it possible. The platform can visualize the potential of the whole spinning process and see it clearly at a glance.

Moreover, compared with all other existing schemes, the Essential digital spinning set has higher flexibility, more precise function and compatibility with third party applications.

At this exhibition, a new digital platform for rotor spinning system is presented.

In 2019, the platform will cover all systems including ring spinning, compact spinning and jet spinning.

In the middle of 2019, the digital UPtime and SPIDERweb cobweb of Lida will also be integrated into the Essential digital spinning set.

UPtime

The UPtime system adds intelligent elements to the equipment maintenance of spinning mills. Based on real-time monitoring parameters and big data analysis, the system extracts data affecting device performance, identifies differences and causes, and hints at potential problems and even equipment defects in the future.

Through this predictive maintenance, UPtime has optimized the equipment maintenance work of the spinning mill.

L four new spinning machines extend product line further.

At this exhibition, Lida will also issue ring spinning frame G 37, G 38 and

K 47, K 48 and other new aircraft, and continue to retain G 32 and K 42 two models.

Ring spinning frame G 37

Ring spinning frame G 38

In view of the shortage of users, flexible production and high quality yarn quality, the "8" series of machines is an ideal choice. This series provides a comprehensive configuration, which is based on electronic drafting system, ISM premium single spindle monitoring and integrated slub yarn device. It realizes highly automated, optimal operation and highly flexible production of conventional and special yarns to ensure customers benefit.

Compact spinning machine K 47

Compact spinning machine K 48

The "7" series of machines, which are not short for employment, but users of flexible production and high quality yarn requirements, provide a high degree of flexibility for users. The spinning range includes the production of special yarns, which are not affected by the length of the fuselage, and cover the longest spindles.

The electronic drafting system reduces the batch parking time. The ISM basic integrated single spindle monitoring system greatly improves the efficiency of the operator and the efficiency of the machine.

The four models can be matched with new LENA spindles, which significantly reduce energy consumption.

In the three ring spinning frames G 32, G 37 and G 38, the EliTe EliTe RIET compact spinning device can be selected.

L self leveling drawing frame RSB-D 26 shows

In spinning preparation, Lida also has new products.

The self levelling drawing frame RSB-D 26 will usher in the first show in Shanghai, bringing excellent sliver quality, lower production cost and simpler operation and maintenance to users.

Self leveling drawing frame RSB-D 26

SSM world's first CWX-W winder

The new SSM CWX machine has expanded the application scope of the winder.

The power consumption of the new winder CWX-W can be as low as 35 watts per spindle. It is an ideal energy saving inverted barrel system, which is used for weaving, knitting and circular machines.

Aftermarket business upgrading and pformation potential

Li Da after-sales service provides many retrofit schemes to enhance the performance of existing Lida equipment.

For example, Lida's newly developed cotton picker has greatly enhanced the UNIflocA 11 capacity of the automatic grabbing machine, up to 1400 kilograms per hour, the highest energy consumption can be reduced by 20%, and at the same time, the maintenance and spare parts cost can be saved.

Customized spinning system to enhance production efficiency and user competitiveness

Customized system solutions according to different customer needs: Delta ensures that the spinning plant has been maintaining extremely high productivity and strong competitive advantage.

At this exhibition, Lida will, from a practical point of view, demonstrate four kinds of spinning processes in an interactive way, including ring spinning frame G 32, compact spinning machine K 47, rotor spinning machine R 36 and air-jet spinning machine J 26.

Quality technical special parts

High quality technical components from Blake, Graff, N. B. and Xu Sen are the best performance of the spinning mill. These high-quality accessories include the new top comb Ri-Q-TOP 2035 (35 teeth) and Ri-Q-TOP 2040 (40 teeth) from Graff, and the new EliTe leaning compact spinning system from Xu Sen.