Design Of Enclosure And Enclosure Shoes -- Types Of Shoe Covers

The shoe is a kind of very common shoe, it is the shoe that the front shoe of the shoe is partitioned into the two parts that wrap around and shoe cover. The change of the cover is a change of flower color of the front Gang, but it has little influence on the rear side. The combination of the cover and the different back bands will form a variety of tongue cover shoe, ear type cover shoe, opening cover shoe, shallow mouth type cover shoe and cover shoe. I have talked about the design of the transected tongue shoe and the tongue shoe, and I haven't touched the tongue shoe. The whole tongue shoe is a vertical tongue shoe.

In the basic structure design, the design process of the outer ear shoe is the most complex, because it needs to consider the difference between the front and the rear points of the shoes. The design of the cover shoe is more complicated than that of the outer ear shoes, because the location of the cover is the most eye-catching position in the whole shoes. We must pay attention to the position, shape, difference between inside and outside and the design of the craft sew. Therefore, the premise of designing the shoe is to grasp the structural design of the foundation first, then capture the design of the enclosure. If there are problems in the design, it is necessary to analyze the design problems of the foundation structure or the design of the enclosure, so that we can solve the problem and solve the problem.

The key to the design of the cover shoe is the design of the cover. From the point of view of structural design, it can be understood that the shoe covers can be broken down into "ten sides of the front cover". That is, many different structures can match the front cover with different styles. See color I series. This is a set of shoe covers.

The color picture I-l is a front opening type cover shoe. The so-called cover shoes, refers to the contour and shoe cover contour line is not really disconnected cover shoes. The front shoe of this shoe is used to distinguish the outline of the shoe and the cover with flower holes. It is necessary to design the location, shape and difference between the inside and outside of the flower hole.

The color picture I-2 is a side opening flip shoe. The front part is divided into two parts: the cover bar and the shoe cover, which are then stitched and turned over to form a shoe without a clear line. The back band is connected with the tongue by rubber bands.

The color picture I-3 is a whole tongue flower shoe, which belongs to the vertical tongue type structure. The flower of the front group extends back to Baotou, and develops into a girth. The tongue and shoe cover are joined together to form a tongue cover, which is stitched by pressing and stitching on the shoe cover. The flowers are decorated with flower holes and flower teeth.

The color picture I-4 is a whole tongue female surround shoe, the surround bar is pressed on the shoe cover, the shoe tongue and the shoe cover are connected as a whole, also belong to the vertical broken tongue type structure. The metal chain can be used as a cross arm, so it can not hide the position of the break. It is generally designed as a whole tongue cover.

The color picture I-5 is an outer ear shoe. The front cover of the front shoe is pressed on the surround strip and is sewn by the stubble sewing process. Notice that its shoe covers are relatively short, and the front ends of the girth are open to the middle.

The color picture I-6 is a suture ridge shoe. The shoe cover and the surround strip are connected by holes and slots to form a three-dimensional shoe ridge. Usually, the shoe that seams out the effect of the three-dimensional line with the shoe cover is called the "seam ridge shoe", and the bottom shoe is a style change in the seam shoe.

Types of shoe covers

The cover shoe is a general term, and it is subdivided into many types. If the shoe is divided according to the structure of the back, it can not tell the characteristics of the cover. If the shoe is divided into the shoe according to the inlaying relation between the round bar and the shoe cover, the structural relationship between the round part and the shoe cover part can be clearly seen, and it is easier to design. The following are the types of shoe covers that are classified according to the characteristics of the enclosure.

1. Wai shoes
The shoe is a kind of shoe covered on the shoe cover, which is pressed around the shoe. Generally, press the stubble quantity on the shoe cover and fold the rim around the shoe. Because the shoe covers are surrounded by the middle, there is a sense of shrinkage, which is more standard and suitable for designing a steady, rigorous, restrained style footwear. See color map I-4.

2. Footwear
A shoe is a shoe that is covered by a shoe cover. In general, when the processing is done, the weight of the strips is increased and the hem of the shoe covers is folded. Because the edge of the shoe cover is exposed outside, it has the sense of outward extension and expansion. It is suitable for designing shoes with natural, lively and dynamic style. See color map I-5.

3. flip over shoes
Flip shoe is a kind of shoe that uses the technology of surfacing and stitching. Generally, there are two kinds of processing methods. One is to add 1.5 to 2mm joint seams to make joint seams, and the other is to add the amount of crushing and the amount of hem. The stitching effect is that there is no clear line on the front of the cover, which is simple and exquisite. It is suitable for designing delicate, implicit, handsome style shoes. See color map I-2.

4. seam ridge shoes
Slit ridge footwear is a kind of shoe that seams a solid line between the girth and the shoe cover. During processing, due to different sewing methods, there are many types of extruded ridge, opposite ridge, two ridge, three ridge, and Bao ridge, each of which has specific requirements. Because the shoe ridge is a three-dimensional line, visual impact is strong, suitable for the design of heavy, casual, avant-garde footwear, the common bottom shoes, wrinkle head shoes and so on are all suture ridge shoes. See color map I_6.

5. fake covers
A fake shoe is a shoe that has a contour line with a shoe cover but does not really disconnect. During processing, there are commonly used techniques such as fake lines, flower holes, and flower strips to divide the fence and shoe covers. The appearance is similar to that of the shoe, which is a color change of the imitation cover structure.