Is The Standard AN Equivalent To 50% Chest Circumference Consistent With All Groups?

This refers to the more standard shape of the fitted style clothing, because the fit and size of the garment is mostly 6~8 centimeters (refer to woven fabrics).

If the net chest circumference is 84 centimeters, the garment chest circumference is 90~92 centimeters.

Sleeve width is 20% chest circumference (90~92 cm) minus 1.5 to 2 centimeters equals 16.5 to 17 centimeters, or 50% and 3~4 centimeters based on the net arm circumference of the human body, basically the same size as the former; and according to the sleeve sleeve angle of the fitted sleeve is about 42 degrees, because sleeve length is long enough to get through sleeve width and sleeve depth.

Therefore, the sleeve angle and sleeve width are determined, and the height of sleeve hill can be obtained.

By measuring the 50% hole arc length of the sleeve fat diagonal and multiplied by 0.25 cm by 2, the AH value (sleeve length) is 50% centimetre plus or minus 0~1 cm.

If you want to make the sleeve fat thin, the AH value is 50% chest circumference minus 0.5 ~ 1 centimeters.

If it is a special figure, it is necessary to measure the size of the arm circumference and get the width of the sleeve after the 50% loose weight of the arm. Then determine the sleeve type, that is, the diagonal angle of the sleeve, which is 42 degrees or 43 degrees. Then you can get the diagonal value of sleeve fertilizer and sleeve height, that is, the AH value.

The width of armhole door is determined by sleeve width reduction from 3.5 to 4 centimeters. The position of the deep line of sleeve sleeve is adjusted by the difference of sleeve height, that is, BNP line to BL line.

The AH value of the cuff arc of fat body is likely to be less than 50% chest storage by 1 centimeters. As for the reduction, the diagonal measurement of the width of the sleeve should be measured.