The Prospect Of Hosiery Machine Market In China Is Good.

It is estimated that domestic cotton socks demand is around 1 billion 800 million pairs per year and grows at 8%~10% ratio. The annual demand in the international market is about 1 billion ~15 billion, and the demand growth is 3%. The demand for high-end market is constantly expanding, and the market of hosiery machines is promising.

Our country

At present, the occupancy of advanced equipment in domestic socks industry is less than 30%. In addition to a few large socks industry production enterprises have more advanced technical equipment, the other enterprises use relatively backward equipment, which seriously affects the development of production capacity and the improvement of product quality.

With the development of new socks to meet the needs of special functions in the use of new materials, hosiery machinery manufacturers are also improving the degree of computer control and improving the computer-aided pattern design system, while paying more attention to the development of all shaped, functional and efficient hosiery machines.

Now the knitting machine industry in China has already covered 7 major categories: circular weft knitting machine, flat knitting machine, hosiery machine, glove knitting machine, warp knitting machine, crochet machine and knitting machine.

But in these 7 categories of knitting machinery, the mechanical level of all kinds of machinery is uneven, and there is still a certain gap compared with the first-class machinery abroad.

Take the computerized flat knitting machine as an example: the price of a full-automatic computerized flat knitting machine abroad is as high as 800 thousand, while the domestic automatic computerized flat knitting machine sells for 20 tens of thousands of yuan.

Price is only one aspect. Over the years, import and export of medium and high grade knitting machines accounted for a large proportion of China's textile machinery.

Authoritative statistics show that in the knitting machine industry, China's high-end textile machinery's international position and share in the domestic market are not as good as those of advanced foreign countries.

towards

The reasons for this phenomenon can be summed up as follows: the knitting industry's requirements for knitting machinery have exceeded the domestic production level of knitting machine manufacturers.

Technology can not meet the requirements, of course, the market competitiveness is low, of course, the market will be insufficient.

In fact, the domestic knitting machinery manufacturers have begun to advance to high-end technology, but because of late start, manufacturers from capital to technology research and development are not good and bad. To catch up with foreign advanced level technically, it takes a long time and more capital investment.

When foreign manufacturers are developing towards computerization and automation, there are many knitting machine manufacturers in China around the production of manual machinery.

In today's knitting industry, due to changes in workers, funds and so on, the requirements for knitting machines have been developing towards semi-automatic and fully automatic computers.

Domestic manufacturers are mainly concentrated in Jiangsu and Zhejiang, especially in Changshu, Wuxi, Zhangjiagang, Hangzhou and Shaoxing.

Products are mainly exported to Zhejiang, Guangdong, Jiangsu and other places.

In these sales areas, the main range of manual machinery used in the past was Guangdong and Zhejiang. The main sales scope of semi-automatic machinery was Zhejiang and Jiangsu. The main sales scope of automatic machinery was Zhejiang and Jiangsu.

From the perspective of market sales, it is not only the demand of the domestic knitting industry for the automatic computer machinery is increasing day by day, but it is also an inevitable trend to replace machinery with machinery in the world.

Therefore, the domestic knitting machine industry will inevitably develop towards the high-end.

Hosiery machines and other equipment manufacturers must enhance the upgrading of product development with the downstream units, and speed up the pace of development.

Many of the user's equipment improvements were very successful.

According to the idea of expanding independent research and development by importing technology advocated by the state, the growth of R & D investment in manufacturing industry in the future should be higher than the increase in equipment investment, and at the same time, more attention should be paid to software and system upgrading.

Development direction of hosiery machine in China

In recent years, the development of new socks has been developing towards the adoption of new raw materials to meet special functions, especially health care functions.

Hosiery machine manufacturers are also improving the degree of computer control and improving the computer-aided pattern design system. At the same time, they focus on the development of full molding, functional and high-efficiency hosiery machines.

For example:

Fully molded underwear small caliber knitting machine

The SM8-8TOP type fully formed small diameter knitting machine pioneered by Italy SANTONI company is improved on the basis of hosiery machine.

They specialize in the production of elastic underwear and personal clothing, swimsuit, sportswear and medical care clothing for men and women.

Although the machine is cylindrical knitted, the yarns are only formed in the area of the garment, only in other areas, and then cut by the scissors on the machine.

As the whole underwear is fully molded, no need to cut and sew, which greatly improves the product quality.

The diameter of the machine is 10~16 inches, the machine number is in E16~E32, the 8 way circle system, the speed is 100~150 revolutions / points.

Hosiery machine for producing medical stockings

CC4-MED all electronic four system high performance single needle hosiery machine is used to produce 1:1 Leggings tight pants, anti thrombotic stockings, medical double pressure compression stockings and tights.

The size of the machine is five inches in diameter, 3.75~6 inch, and the machine number is E16~E34. Each system has a regulator to facilitate different needle selection.

The knitting process of socks can be directly generated on PC machines or machines.

Function keys are used to program machine functions in a simple or particularly precise way.

Omit

The MONO4 hosiery machine introduced by Italy MATEC company has changed the process of knitting socks from the stockings to the end of socks, and then sewing the socks.

It starts from the stockings, and forms a bag like closed stockings. Finally, the stockings are knitted, which saves the sewing process and improves the production efficiency.

The working principle of the machine is: first use the needles of each half of the syringe and the needle plate, and knit the bag socks through the retractable needle, then the needle plate turns 180 degrees, pfers the coil on the needle pin to the other half empty needle pin, then all needle needles braided cylindrical socks bottom.

It can be seen that socks and hosiery machines have gone beyond the scope of traditional consumer goods and knitting technology, and are developing and developing new products with advanced science and technology such as new fiber materials, computer control and electromechanical integration, biomedical engineering and so on.