On The Finishing Of Knitted Garments

Ironing is the next process of ready-made clothes. If a garment is not done well in some parts, it will be completely finished if it is not well done.

The general requirements of ironing: the seam is straight and straight; the vertical angle should be the vertical angle, the arc should be round and symmetrical, and the symmetrical part requires symmetry.

In practice, some specific operations are as follows (mainly in knitted apparel). Round Neck Shirt For example:

First, first press the side seam of the clothes, and the children are clear and straight.

Second ironing sleeves, for flat sleeves seams, it is best to have both sides to the sleeves, and to hold the size of the front pieces. After heating, it is necessary to see if the sleeves of both sides are symmetrical. It is very easy for the knitted garments to appear asymmetrical on both sides. Therefore, the clothes should be put straight before stepping on the suction fan. For the sample or the size of the product, the product must be roughly measured in size after the placement. Clothing fabric Uniqueness)

The third body is usually ironed and usually ironed. However, some things can not be ironed or can be pressed for a long time. printing Some fabrics must be bright if they exert themselves. If the fabric of the spandex is too hot to be retracted, the waist of the waistband with rubber bands is usually blown by steam. (of course, before making clothes, the fabric or rubber band should be pre contracted).

Fourth the collar of the collar is ironed. The round collar should be round and symmetrical. Flat knitting rib Cover the seam of the back collar.

Hello! These are the experiences and methods that I have summed up in the production practice for your discussion and communication. Knitted garment Tofu blocks for production and management.