How To Maintain Sandals Hibernation

Step one: different

The stains on leather upper can not be wiped with wet cloth, and can not be washed in water. Otherwise, it will damage the color of the shoe surface and make the leather shoes hardened and deformed.

Light coloured

Glossy leather sandals, use dry cloth to wipe off stains, some shoe oil can.

Suede

Hemp bottom shoes: the bottom of the hemp rope is easier to dust, but it can not be washed with water, which will affect the appearance.

Use household dribler to adjust to the cold wind gear, blow off the dust in the lap of the rope bottom platform, and gently brush it again with a soft small brush.

Sandal bottom table Sandals: after wearing, you can use the clean cloth to wring dry, wipe the dust on the bottom mat and dry it.

Leather or PU bottom Sandals: apply the corresponding shoe polish to the leather while nursing, gently brush the vamp evenly with a soft shoe brush, then wipe the skin with a clean cloth on the leather surface for several times to make the leather more shiny and more textured.

Cloth Sandals: though they are cloth materials, they should not be washed with water.

If there is a slight oil stain, it can be cleaned with a small amount of detergent used in tableware and fruit, and then washed and dried with rags.

If there is a phenomenon of bubbling and stratification after cleaning, you can use the ironing iron at 80 degrees, cover the upper part with white cloth, and press it for 5~10 seconds. Basically, it can be restored. Please do not wear it immediately after repair, because the time for curing the glue inside the cloth is more than 1 hours.

Leather Sandals: wipe the dirt on the vamp with clean soft cloth first.

Then use 2 Cleanser, 1 alcohol and 50 parts of water to make the cleaning fluid. After soaking the cloth, wipe it on the vamp and do not need too much effort.

After the shoes are naturally dried, wipe them again on the upper with soft cloth soaked in water, then place them in the ventilating place and dry them naturally.

Sequins: the first one is glued on the shavings. It feels like some abrasive paper. The second one is sequins. No matter which one, as long as the dip is likely to drop, it can only be used or clean with a clean towel, wet with water, stained with a little bit of silk and a little bit of dirt.

The second style should not be scrubbed with cotton. The sequins will leave cotton wool.

Just wipe the cloth with polyester cloth. It's OK to dip in some water, but not too much.

Suede: This suede is a very troublesome leather. MM should be considered before buying, sweating easily, and not suitable for rainy days.

If dirt is stained, wipe the dust on the surface of the shoe with a shoe brush. Then wipe the dirt evenly with the eraser, which is said to have a special suede eraser. The intensity should be moderate and try to be like the same direction, so that the texture will be in the right direction, the damage will be reduced and the decontamination will be improved.

In addition, there are suede detergent for shopping malls.

Canvas: don't use detergent and soap. The washing powder will fade and the soap will turn yellow.

You can use toothpaste to find a toothbrush. The softer the hair is, the better the softer the hair is. Brush gently with toothpaste, brush the waste water together and wipe it up. Then clean the part that has just been cleaned with water.

Don't bask in the sun after you brush it, fade it down, put it in the shade, and dry it naturally.

If it is a white canvas, and cover it with a layer of paper towels, it will not turn yellow.

Satin: many of the more high-end dress shoes are mostly satin and silk. Advanced satin is not recommended for you to do any processing. You can only be careful when you wear them.

If you want to deal with it, the only way is to use an eraser, but there will be some chips.

Never use brushes. Instead, use magic wand to remove chips with static electricity.

In addition, satin shoes can not be exposed to the sun and will fade.

Lacquer leather: shoe polish should not be polished. It is only necessary to gently wipe the surface of shoes with dry soft cloth. Because the paint has waterproof effect and is not easy to stain stains such as water stains, so as long as the dust on the vamp is lightly brushed, the shoes will instantly shine as new.

You can also use hand cream to wipe the class.

Notice that the surface of the lacquer is coated with a bright layer, so the shoe cloth should be as soft as possible (for example, wipe the cloth on the computer screen), otherwise there will be scratches without careful care.

Lacquer shoes can not be exposed to the sun, otherwise it will be prone to yellowing, skin cracking and aging.

Lacquer leather is airtight, and it is easy to breed bacteria. It is best to wear it every other day.

Mirror skin sheepskin sheep skin: dermis is most commonly divided into cowhide and sheepskin. Sheepskin is soft and comfortable, but it is really not very good. It is hard to get rid of dirty things.

Other methods mentioned above, such as eraser and toothpaste, can be used.

Plastic: if your feet are prone to sweat, they are not suitable for wearing plastic film shoes. Canvas or genuine leather is more suitable because of good air permeability.

Many MM wear plastic on rainy days, so it's easier to dirty.

Brush the old toothbrush with a small amount of clean, gently brush. Do not exert force. The toothbrush must be worn or brushed soft, otherwise it will easily damage plastic shoes.

After repeated cleaning several times, the plastic shoes will become a new look, and they will basically return to their original appearance.

Net surface: this kind of shoes can be regarded as "noble shoes". In addition to using cloth to wipe gently, it is only careful to be careful when wearing clothes. Conclusion: in addition to the maintenance and cleaning methods introduced above, we should pay attention not to wear the same pair of shoes for a few days. Shoes also need to breathe and breathe. After wearing them, they must be cleaned in time, then the shoe stays and protective bags are put into the shoebox.

The second step: do well in mould proofing and moisture-proof treatment.

Before storage, sandals must be dried naturally.

If there are mildew spots, use soft cloth or soft brush to remove mildew spots, and timely polish shoes polish, put some moisture-proof agents in the shoebox.

Otherwise, after shoes are stored, the damp of the shoes will lead to mold and spores spread into the air, which will cause indoor air pollution and easily cause tinea pedis and other diseases.

The third step: proper collection and prevention of deformation.

In order to prevent the deformation of sandals, it is best to put up the shoe braces and put them in the shoebox.

Shoe boxes should be placed in a cool place away from heating and lighting, and can not be extruded.

The number of shoeboxes is not enough. Try to keep sandals in different latticed shoes to prevent shoes from deforming.