How To Buy Leather Garment Fabrics

At present, our country is big and small.

There are more than ten thousand garment production enterprises, with an annual output of 50 million.

China has become a new leather production, processing and sales center in the world.

Leather clothing fabrics are generally divided into goat leather, sheep leather, cow leather, pig leather and horse leather.

The structure of goat leather fiber is more detailed than that of sheep leather, and its strength is higher than that of sheep leather.

Goat leather is characterized by its meticulous surface, dense fibers, a large number of fine velvet, and its pores are arranged in a semicircle. The handle is tough, soft and elastic, while the sheep leather has loose surface, small pores and soft handle.

High quality natural leather is soft, plump, crisp, breathable, solid, tensile, folding, tear strength and other properties are up to standard, as long as proper maintenance, "aging" is very slow.

The state has strict regulations on the physical properties of leather garments.

Visual inspection of fur clothing can be carried out in the following steps.

Appearance inspection: the front should be straight, symmetrical, and straight buttons.

The sleeves are uniform, the sleeves are round, and the sleeves are not twisted.

The rear body splicing is flat.

Silk or nylon silk is often used in clothing.

The stitching line of garment is usually made of polyester thread or silk thread, and jumpers and disconnection are not allowed. The length of the natural leather garment 30mm is 8~14 and the spacing is equal.

The smaller the diameter of the needle, the higher the strength of the seam.

The quality of leather clothing is mainly manifested in the following aspects: color fastness, coating adhesion, material usage, leather strength, processing and so on.

Consumers should pay attention to the following points when buying leather goods: we must recognize the trademarks, specifications, name and site of the leather garments, do not buy products without registered trademarks, and do not indicate the products of the manufacturers; two, leather clothing should not be such as fading, cracking, slurping, etc. The hand feeling should be plump and elastic. The color of the whole dress is uniform, no color difference, color flowers, smooth leather and fine grain. Three is a "touch", two "smell" and three "look".

"Touch" should be soft, plump and elastic. "Smell" should have no strong odor. It should be tasteless.

Generally three or four pigs or five or six sheep can make a fur coat, so the overall effect of leather clothing should be thin, thick and thin, and the color match properly. The smaller the primary and secondary parts, the better.

Leather inspection: first look at decolorization.

Choose the minor parts of leather clothing, such as the back of the collar, the inside of the clothes or the place of the garment. Wipe the water with cotton wool and press it with your hands. Choose a 10cm long part on the leather coat and rub it 20 times on the top of the cotton wool. Observe whether the cotton is stained with color. If the color is heavy, black or dark gray, it is a defective product.

The test shows that the general leather requires a grade of wet rubbing of three grades (see color contrast standard card for leather inspection station).

Then look at the surface of the split surface, or in the secondary part of the intuitive inspection, according to this principle, in the leather clothing minor part cut a small mouth, gently break with the hand, if the incision site deformation, indicating that the tear strength is not enough.

It can also pull the joints with medium strength. If there is a tendency to tear, it will be unqualified. It can also force the fingers to pull the top from the inside. If there are cracks and cracks, they are not qualified.

Leather accessories inspection: leather clothing life is very long, leather clothing accessories high quality requirements, zippers, buttons are generally copper top quality, leather lining is made of high quality silk.

The quality leather fur is soft, lubricated and elastic. The wrinkles that are pressed by hand can disappear very quickly. The thickness of the leather is uniform, comfortable, flat and crisp, not hard or soft.

Produced by glossy leather.

It has soft handle, clear grain, smooth and strong light. It has become the main material for high quality fur production, and needle stitching is widely used.