Leather Shoes Pass Rate Is Less Than 70% Brand Involves FENDI, BURBERRY

< p style= "text-align: center" > img border= "0" alt= "align=" center "src=" /uploadimages/201310/25/20131025033613_sj.JPG "/" < < > >

< p > the Consumer Protection Committee of Shanghai recently carried out a comparative test on some parts of PI market a target= "_blank" href= "http://www.91se91.com/" > shoes < /a >, and altogether 40 samples were selected, qualified for 27 batches, with a pass rate of 67.5%.

The unqualified samples refer to FENDI, BURBERRY and so on.

< /p >

< p > according to the introduction, the detection problems are mainly focused on footwear steel hook core, sensory quality, peel strength, folding resistance and other items.

In addition, the residual amount of harmful substances such as free formaldehyde and six valent chromium, which endanger the safety of consumers, were also detected. The situation is not optimistic.

< /p >

< p > shoe steel hook is installed between the sole and the bottom of the shoe. It is the "backbone" of the shoe. It plays an important role in bearing and balancing. It determines the stability of the shoes, especially the quality of the middle and high heels.

In this test, 11 samples do not meet the requirements of the national compulsory standard. The problems are mainly focused on the steel hook mark, the lower limit of hook length, the longitudinal stiffness, the hardness of the hook core and the bending performance.

For example, the women's shoes (nominal trademarks: BARCLAY bollie, model: BC04-4012/235mm), which are produced by the river forest (Shanghai) Trading Co., Ltd., are lower than the standard requirements (above 115mm). The nominal stiffness of the left and right shoe steel hooks is 366 kN.mm2 and 273 kN.mm2, respectively, which are significantly lower than the technical requirements of the standard of the product specified in the product standards of more than 500kN.mm2 (BC04-4012/235mm). The women's shoes (nominal trademarks: Kastgau, model: QE238008A) are rated below the standard requirements (115mm).

< /p >

< p > in order to standardize the commodity identification, the overall appearance requirement of the leather shoes standard must be marked with the Chinese shoe number in the shoe body.

In this experiment, there are 2 samples of famous foreign brands, namely, ladies' leather shoes, which are distributed by Fendi (Shanghai) Commercial Co., Ltd. (nominal trademarks: FENDI (Fendi), model: 814282 NEHFOQZO 235mm) and Boboli (Shanghai) Trading Co., Ltd. (women's leather shoes) (nominal trademarks: BURBERRY (Bo Baili), model: 38621061003/235mm) do not mark the Chinese shoes numbers, which do not meet the standard requirements, indicating that these famous foreign brands need to be improved in the implementation of China's product standards.

< /p >

< p > the test also detected the possible residual toxic and harmful substances, free formaldehyde and six valent chromium, in leather shoes.

China's current national standard < a target= "_blank" href= "http://www.91se91.com/" > Leather > /a > and the limit of harmful substances in fur "stipulates that the value of free formaldehyde should be less than 10% if leather is directly exposed to the skin and a target=" _blank "href=" http://www.91se91.com/ "> textile > _blank > product.

Many female consumers like to wear shoes with bare feet. Therefore, formaldehyde content is too high, which is more likely to cause harm to the human body.

The results of this experiment show that the measured value of free formaldehyde in women's shoes (nominal West Village name and model: X221E1330112/235mm), which is distributed by Shanghai junzhuo shoes industry Co., Ltd., is as high as 228mg/kg, exceeding the standard several times.

According to experts, excessive six valent chromium has a lethal effect on aquatic organisms.

The results of this experiment show that the six valence chromium index of some products is high.

< /p >

< p > Shanghai Consumer Protection Committee suggests that production enterprises should strengthen the learning and implementation of standards, especially the national mandatory standards, and organize production strictly according to the standard requirements.

The relevant standards making departments should revise and improve the relevant product standards as soon as possible, and incorporate the requirements of personal safety limits such as free formaldehyde and six valent chromium, so as to safeguard consumers' health rights and interests.

< /p >