Introduction Of Several Commonly Used Fabrics For Outdoor Sportswear

　 1.mont-bell waterproof cloth three level system

As the world's premier waterproof The coat manufacturer, mont-bell understands that the quality waterproof coat requirements are not "waterproof" so simple. Different people will have different requirements on the air permeability, weight, folding volume and price of the coat on different occasions, so mont-bell uses three different kinds of waterproofing. cloth For different purposes.

2.GORE-TEX

The highly praised GORE-Tex is highly waterproof and breathable, so it is the best choice for making top coat. After more than 20 years of development, mont-bell has become the largest Gore-Tex clothing manufacturer in Japan. Gore-Tex itself is a very thin expanded polytetrafluoroethylene film ePTFE (expandedPoly-Tetra-Fluoro-Ethylene), which is placed on the cloth in a sandwich manner. It is characterized by 1 billion 400 million small holes per square inch, the size of each hole is only 1/20000 drops of water, but 700 times larger than that of water vapor molecules. Therefore, only water vapor is allowed to pass through the water points. The water resistance is as high as 45000mm, and the air permeability is as high as 13500g/m2/24hrs. Therefore, it has excellent waterproof and breathable functions. Because the cloth used by mont-bell is lighter and lighter than usual, its permeability is higher than that of other companies.

Another feature of the mont-bellGore-Tex coat is that there are very few Gore-Tex marks on clothes. From the very beginning, mont-bell has made use of the function of Gore-Tex to produce excellent clothing, rather than using Gore-Tex cloth as a selling point. Therefore, clothes do not deliberately leave the mark of Gore-Tex.

　　 3.Dry-Tec waterproof breathable membrane

For those who require extreme lightweight, mont-bell specially developed Dry-Tec waterproofing cloth, its water resistance is as high as 30000mm water pressure, similar to Gore-Tex, and also has the air permeability of up to 6000g/ /24hrs, while the weight is lighter 1/3 than Gore-Tex, while the folding volume is smaller than half. It is a new generation of super PU class waterproofing breathable membrane developed by mont-bell. Its secret is to mix the technology of PolyUrethane (polyurethane) and Ceramic (silicon carbide) and synthesize it in three tiered structure. The bottom layer is a very tough film, which is used to combine cloth and resist water pressure. The pore size is only 0.1mm, the center is highly permeable layer, and has a larger pore (5-10mm). Finally, it is a thin and wear-resistant protective coating containing silicon carbide, and the pore size is 5mm. This unique structure enables Dry-Tec to have exceptional waterproof and breathable performance and lighter weight. Other advantages of Dry-Tec include: folding volume is very small, very washable and wearable, very suitable for active sports people. (1mm is 1/1000mm).

　 4.HydroBreeze-PXTM

In demand Practical On occasion, MontBell specially chooses HydroBreeze waterproof cloth. It is the material developed by Montbell for the new generation of all-weather jacket. It is made from the famous Hydropro waterproof membrane of Montbell. However, the waterproof membrane contains 0.1mm air holes. Similarly, the size of the pores can only allow sweat to pass through and block water droplets. The water resistance is as high as 20000mm, and the air permeability is 4000g/ /24hrs. It is more comfortable than the general waterproof raincoat. In addition, its weight is lighter and softer than other tarpaulins. HydroBreeze is quite washable. After washing 20 times, it can still maintain 15000mm water pressure. The new generation of HydroBreeze-PX is more durable and resistant to wear, and is the choice for heavyweight windshield and rainproof clothes. (1mm is 1/1000mm).