Revealing The Production Process Of Putian Fake Shoe Factory

Making the shoe cut: that is to cut out the material with a cutting tool. It is quite dangerous to operate this machine. The workers' fingers are cut down. (this process will be replaced by laser cutting in the future. The laser cutting bed is usually with single head, double heads, three heads, five heads, CAD, and then projection in laser.

Line up, line up, high temperature laser cut through.

The vamp is sewn up here.

The factory is now on the order of Jordan (China), which can be seen from the LOGO.

The good shoe upper is sent to the product inspection area, the Inspector checks the product, and the inspector is responsible for repairing the thread.

(face inspection area), that is, the needle train, the whole pair of shoes.

The most concentrated and intensive place can be replaced by zero. Only by increasing the process, can we reduce the proportion of manual sewing cars. For example, we should use seamless fit and reduce the labor ratio as far as possible, so that the quality of the finished products is relatively high, because this process is too demanding for skilled workers, especially for brands that are very strict in quality requirements, the output will often be stuck here because defective products are destroyed and repaired.

)

Shoe last, a model used for shoes.

The new shoes should be filled with or with the hollow part of the shoes, so that the new shoes will have a good appearance and fit.

For shoes designers, no matter how the shoe styles are, they can be changed. They can be divided into five points: the last point, the warp and the fatness.

The comfort and beauty of shoes are very much related to the shoe last, and the development of new shoe last ones is very expensive. Only a relatively large factory can develop.

Related links:

The unhealthy development of cotton industry has made chemical fibers more and more important in the cotton textile industry.

In the past 2011-2013 years, the use of cotton fiber in our country has dropped sharply, while the use of polyester staple and viscose staple fiber has risen sharply, and its price is much lower than that of cotton. Most enterprises have used their cotton instead of cotton as raw material.

Duan Xiaoping, President of China Chemical Fiber Industry Association, suggested that cotton spinning enterprises should shift their attention to the cost and price of chemical fiber to pay attention to quality and function in the context of structural adjustment and pformation and upgrading, so as to enhance the added value of cotton textile products.

In recent years, with the development of technology, China's cotton production has been increasing. However, the cotton consumption of cotton textile enterprises is decreasing. If we want to change the inherent attitude of cotton textile enterprises to domestic cotton quality, we must constantly improve their internal quality and adapt to the development needs of cotton textile enterprises.

Wang Qingcui believes that it is difficult to increase cotton consumption in the future.

In the 3 years of storage and withdrawal, many cotton textile enterprises have accepted the use of chemical fibers, have been pformed from technology and equipment, and have also brought economic benefits to enterprises. With the continuous development of chemical fibers, they are becoming more and more popular in downstream industries.

In the future, if we want cotton textile enterprises to use cotton back, we must use cotton more attractive than chemical fiber.

Wang Qingcui said that with the marketization of cotton prices returning, cotton consumption in 2015 should be slightly restored, but the quantity will not be too large.