Below 100 Yuan, The Qualified Rate Of Snow Boots Is Only 40%.

Winter shopping

I really need more eyes.

Yesterday, the Jiangsu Provincial Quality Supervision Bureau released the sampling and risk monitoring quality analysis report of snow boots.

According to the new standard of snow boots, the passing rate of snow boots is 75%, but it is worth noting that the qualified rate of snow boots below 100 yuan is only 40%.

Experts also warned that most of the snow boots sold at present are not able to defend the melted snow and are not suitable for walking in the snow.

Less than 100 yuan of snow boots, 60% is not qualified.

The snow boots were sampled in 60 batches, from production enterprises, physical shops and online stores.

The test results showed that there were 45 batches of qualified products with a pass rate of 75%, and the main problems of substandard products were

Wear resistance, folding resistance, cold proof performance and logo marking are not qualified.

The quality supervision department also carried out risk monitoring for water vapor permeability, surface and lining materials.

In the risk monitoring, a total of 49 batches reached the target rate, reaching 81.7%.

The sampling results showed that the passing rate of snow boots below 100 yuan was just over 40%, and the passing rate of snow boots between 100 yuan and 200 yuan reached more than 70%, while the passing rate of snow boots between 200 yuan and 300 yuan was 80%, reaching 300 yuan, and the qualified rate of sampling samples was 100%.

In the process of sampling inspection, the quality supervision staff found that the implementation standards of snow boots in the market were rather confusing, especially the standards of snow boots purchased by physical shops and online shops were various.

The relevant standards of leather shoes, leather sandals, injection shoes and tourist shoes.

"The size marking of some snow boots is also not up to standard, some are marked with euro code, others are European code and international common code."

Yang Dongfei, Minister of light industry and textile department of Zhenjiang quality inspection center, said many of the three products were flooded with small commodity markets.

Why do online shopping boots have the highest pass rate?

It is noteworthy that in this sampling inspection, the pass rate of the three channel samples is actually that the online store has won the leading position with a slight advantage, the pass rate is 77%, the qualified rate of the production enterprise is 76%, and the qualified rate of the physical shop is only 67%.

Is the online shop selling snow boots more reliable? "Reality is not the case," Yang Dongfei explained. The difference in sampling time led to this result. "When sampling last September, only online shops were selling on a large scale, and the shop did not buy many snow boots until the end of October, so there were only 9 batches of samples in the shop."

Yang Dongfei said that the next sampling inspection, they will take this factor into account, more scientific and reasonable sampling.

He reminded us that online shopping snowball boots should be careful of quality.

Unqualified snow boots

durability

The soles are easy to break and not wear resistant, some are only 2 millimeters thick.

This time, there are 9 batches of snow boots with no folding resistance. That is to say, the shoe sole of snowball boots can be made in half by ninety percent off, and the wear resistance of 5 batches of shoes is not up to standard.

Yang Dongfei said that the two items are not qualified, which is related to materials and design. It may be the ratio of shoe sole materials, and it may also be the use of long-term storage of aging shoes, or even the use of renewable rubber.

In this test, some snow boots are not only resistant to the folding resistance of the soles, but also take apart a look. The actual sole thickness is only about 2 millimeters, and the sole of the decorative pattern is even hollow.

"The standard of snow boots does not specify the thickness of the sole, which provides an opportunity for the manufacturer to reduce the thickness of the sole."

Yang Dongfei said.

Warmth retention

Known as "fur and wool", the result is artificial hair.

This time, 6 batches were "losing points" in terms of warmth.

Snow boots are warm, and the structure and materials are the key, but some snow boots are "tricky".

In this test, there are some snow boots known as "fur and wool", but after cutting, it will be found that the back is all skin and fur, but the former is artificial plush, and the place that really needs warmth is poor warmth retention.

Yang Dongfei said that producers do this to deceive consumers.

Then how can we see whether these snow boots are really all skin and fur? Experts have demonstrated on the spot, pulling the outer side and lining of the outside to pull hard, and pulling apart, obviously feeling that there are other interlayers, which is certainly not the fur and the whole body, but the dragging is not real.

To keep the snow boots warm, the structure of its material is very important. Yang Dongfei introduces that the snow boots are mainly divided into single skin structure, three layer structure and four layer structure.

Most of them are warm and breathable, and are warm and durable.

The three layer structure and four layer structure material may be used as synthetic material, sponge, artificial wool and so on.

Waterproofing property

Most of the domestic snow boots are not snow free.

Many people understand from the name of snow boots that snow boots should be boots worn in the snow.

But what is the actual situation? The experts' statement has made many people feel depressed.

"Now manufacturers have the view that snow boots should be classified into indoor and outdoor."

Yang Dongfei said, in fact, under normal circumstances, some countries believe that snow boots should be outdoors and worn in the snow, but others believe that snow boots should be a warm shoe for indoor use.

Yang Dongfei said, at present, most of the snow boots produced by domestic manufacturers are not suitable for walking in the snow field. "If the snow is deep enough to snow, the snow boots may fail once and for all."

At the same time, he said that the name of snow boots is now a bit embarrassing. Although it is called snow boots, it is not suitable for walking in the snow. At the same time, the new standard of snow boots does not require snow boots to have the function of preventing snow water.

You have to learn these tricks.

1, look at

Look at the logo: the official product logo should include trademarks, brand names, shoe numbers, material, place of origin, business name and contact mode, and three package regulations.

Look at the soles: the thickness of the soles, the thicker the sole, the better the insulation performance; the depth of the pattern, the depth of the pattern should be moderate, too shallow, not slippery, too deep, and the sole will break easily.

2. Touch

Feel the upper side: the skin is a plump, plump, plump, plump and elastic body, while the artificial Plush feels fine, but the elasticity is poor. The artificial leather has soft and soft handle and is relatively smooth.

Shoe soles: good soles are meticulous, smooth, with no visible bubbles and glue shrinkage. They are flexible and elastic, while poor soles are poor in elasticity, rough in workmanship and stiff in hands.

3, smell

It is advisable that a small amount of hair on the side of the body be smelled after burning, with a smell of burning and hair. The residue is loose and crisp black coke, and can be crushed by hand.

There is no smell and other pungent odors. Some of the soles made from recycled rubber materials smell a strong petrol smell. The wear-resisting and folding properties of such soles are the worst in the sole. The intermediate materials are also irritating because of the poor quality of the glue.

4, ask

Ask if the product has after-sales service and warranty period.

At present, most of the snow boots sold in the market and online shops have no necessary "three package regulations" in their products and packaging.

Two ask whether there is a formal sales invoice.

When issuing sales invoices, the uncertain quality information, such as materials inside and outside the seller, should be specified in the sales invoice for some products that are not clearly marked and the seller is selling during the sales process.