Dongguan Enterprises Intelligent Leather Cutting Robot Industry Hotspot

A machine can achieve tens of thousands of intelligent typesetting operations, and the price of this device is still a matter of waiting for discussion compared with the wages of skilled workers.

Is this leather intelligent cutting robot applicable?

In the world's largest footwear production base, it often forces Dongguan enterprises to develop intelligent machines that are more closely related to production needs.

In order to keep their enterprises in an invincible position, after years of running in with the first-line shoemaking factories, the self-developed leather intelligent cutting robot can raise the utilization ratio of one leather to 89%.

This can not be done artificially.

Maximum utilization

An irregular natural leather material is pformed into a smooth upper by Emma CNC intelligent cutting robot. First, data scanning is needed to change the traditional paper shoe into CAD file, that is, the electronic version of the traditional cardboard.

Traditional shoes and cardboard need to be painted by hand.

There are two ways to cut leather materials. One is to compare them with paper boards, and then to cut them with scissors.

The two is to cut with a knife.

Obviously, hand shears are of poor accuracy.

If a skilled worker completes a workload of 1000 cardboards a day, the workload of the worker will be very large.

If you cut with a knife, every newly designed shoe has different shoes. If a shoe does not have an order, it will be useless to spend thousands of dollars.

It can be seen that both the cardboard and the knife die are very demanding for manpower.

The advantage of using electronic version is that different cardboard can be painted with data scanner or cursor.

After digitalization of solid cardboard, it lays a foundation for more key processes.

After scanning, the CAD document will be sent to the robot that really performs the cutting function. At the top of the robot, there will be a high-definition digital camera with tens of millions of pixels. It will identify the defect points carried by the natural leather material itself, then arrange the CAD file on the leather material. The final typesetting is the best utilization plan after tens of thousands of calculations.

Through projection technology, the CAD graphics are displayed on the leather material. These shapes can be used to make full use of leather.

The most subtle aspect of the robot is the processing of the defective points. The defects of the original leather material just fall on the seam or the position of the package.

Intelligent cutting in 6 minutes

The best utilization rate of typesetting will be pmitted to the cutting zone immediately.

The two flexible mechanical arms emit the special sound effect when the robot runs, and the rhythm of the left and right starts simultaneously, at the end, the sharp knife head starts to smooth the leather according to the instructions issued, and the shoe leather surface of each shoe is thus heard out.

Generally speaking, a skilled worker works for 6 years in such a block.

Only 10 pairs of shoes can be put on the plate, and only 8.5 pairs for a novice. It usually takes five or six workers to spend an hour or so.

However, manual adoption often leads to such a situation: ensuring speed but not ensuring accuracy, ensuring utilization rate, but not ensuring speed.

Therefore, manual cutting can achieve the accuracy of cutting robot, which may take longer.

Emma CNC's robot, intelligent typesetting only takes about 3 minutes, and it can achieve one side typesetting while cutting.

As a whole, 2 people operate a machine and only need 6 minutes to cut a piece of raw leather, which can replace the workload of five or six workers.

The time is short, the quality is good, and the work efficiency is greatly improved.

It is learned that the whole

The price is 600 thousand yuan, and more than 300 customers at home and abroad have taken the initiative to find Emma CNC to order.

"Even with the loss of cooked workers and the recruitment of a new worker with only 3 months' experience, the robot will get the same result."

Emma, President of CNC, said that the concept of cutting has not been formed in foreign countries, because in the development of China's footwear industry, there will be various needs in the production process, making it easier for Chinese enterprises to develop such robots.

The world clothing shoes and hat net Xiaobian believes that even if the machine is so competent, the most unbelievable point is the maintenance of machines, which can be cured by human diseases. But if the equipment fails, can the after-sale service be done well, and the useful life of a device and the number of years that can be used are also a problem.

The expensive equipment small business is not dare to try, the fund is a problem, but this aspect starts to face the lease, the small plait thinks also is a good choice.