There Are No Dirty Shoes In All Kinds Of Shoes.

Cleanliness

Artificial leather: artificial leather cleaning is relatively simple. As long as the cloth is cleaned with wet cloth, wipe it immediately with a dry cloth. Avoid using the shoe polish oil for a long time to wipe the vamp, which will cause small cracks in the upper leather cortex.

Grind leather surface (anti fur surface): the shoe upper with this material is also clean. It only needs a clean and dry toothbrush to brush on the leather surface in one direction. In order to ensure the life of the shoe, please try to avoid touching the upper with water and oil.

　 Leather upper This kind of leather cleaning is the easiest. We can find a damp cloth and wipe it with dry cloth.

Special fabric surface: the cleaning method of this material is to clean the upper part of the shoe with a small toothbrush and clean water, then clean it with a small toothbrush and then wipe it with a dry cloth. I would like to remind you not to use brushes and water to brush the vamp directly, and try to avoid using shoe polish to maintain uppers, which will reduce the life of shoes themselves.

Maintenance

We should first guarantee. shoes Internal drying, you can find some paper as stuffing into the shoe interior, to stretch the surface of the shoes to smooth and smooth, but do not need too much paper. Next, find a small package of preservatives on the shoes, wrap the shoes with special shoes, and use the hair dryer to stretch the shoes and shoes to 5-10 smooth meters. Remind everybody to blow the air of the shoes and the air inside the shoes to ensure the tightness of the shoes. Finally, place your shoes in a ventilated and dry place, and avoid being irradiated with strong light.

First, when shoes are dirty, wash them with water and gently scrub them with water, then rinse them with clean water and place them in a cool, ventilated, dry place to avoid direct sunlight and exposure. Do not use heating or open fire to avoid aging, glue, fade and serious deformation. The excessive direct sunlight, and the improper nursing methods such as the heat of the blower will reduce the service life of the shoes. When it is washed, it can not be soaked for a long time. The general soaking time should not exceed 20 minutes. Genuine leather shoes It can not be soaked in water.

Two, if stored for a long time, shoes should be cleaned first, dried and placed in a cool and ventilated place, so that shoes have enough time to blow dry, so as to avoid mildew. Real leather shoes should be supported by paper balls or shoes, so as to avoid serious deformation. Turn the toe ends towards the wall and dry them at the ventilating room at normal temperature, so that the water can be prevented from soaking into the foam materials at the bottom. (because the foaming materials are not easy to dry, it is recommended not to put the wet shoes flat. )

Three, in the process of wearing or brushing, do not use excellent brush or force too much, nor can you use fingernails or sharp tools to pick out the edges and corners of these printed patterns. After wearing for a period of time, there may be some small cracks (especially the tortuous parts) on the surface of some patterns, which are all normal.

Four, every day athletes or regular sports enthusiasts, it is best to prepare more than two pairs of sneakers for replacement; the nylon mesh fabric and artificial tanning leather on running shoes are relatively easy to maintain, and can be washed by sailors. It is best not to wash with washing machines or soak in water. Separate shoes and shoelaces from neutral soap / detergent. When you wash your shoes, remove the insoles, gently brush them with soft brush, and rinse them at last.

Five, in order to enable you to achieve a satisfactory dress effect, please treat your shoes fairly. Remember not to wear general jogging shoes or walking shoes for vigorous sports such as football and basketball. At the same time, no sport shoes can contact with sharp weapons.

The leather surface of 1: shoes is wet with cotton cloth. After drying, wipe!

Toothbrushes, smear with water and wipe from the inside, for example, the front of the shoe is in front of the shoe, so the shoes should be brushed in the direction of the shoe toe. So the dirty stuff will not be left on the shoes too much! After all the tests are finished, remember not to be exposed to the sun directly, that will make the white shoes yellowed. The correct method is to put the shoes in the cool and airy place in your home. If there is a little sunshine in the ventilation area, you can rely on the tissue, all wet and put on the upper surface (that is to cover all the shoes), so that there will be no yellow shoe phenomenon. 2: network, most of the network surface is PV net, which can be used.