How To Transform "Small Booth" Into "Large Space"

If the booth is allocated to a small booth, the booth designer should try to change the adverse conditions and factors, otherwise the whole exhibition will fail. How to make use of the existing adverse conditions to achieve a better display effect?

First of all, designers should have the skills of space design, organization and control, like architects, to make small booths "big". The following methods can be used:

1. In order to make the booth "bright", the light box structure can be used.

The K8 system (eight prism exhibition stand) or three-way plug-in frame structure, white organic glass inlaid, and straight tube fluorescent lamps installed inside can make the booth transparent, light and bright, and the stand image is prominent, which can attract the attention of the audience.

2. The exhibition hall environment can adopt a combination of overall photos and local photos.

If the exhibition hall is low, a group of grid lights can be installed on the ceiling in rows or grids. Or use trough lamp to illuminate the ceiling. The straight tube fluorescent lamp can also be used to make a large-area luminous ceiling. More advanced "electroluminescence" lighting technology can be used to make the ceiling, wall and ground of the whole site bright. In addition, straight tube fluorescent lights or neon lights are also installed at the back and bottom of the wall side display case and at the lower part of the booth. In this way, the booth will make people feel spacious and tall, changing the original sense of depression and depression.

3. The space interface and display channel should be white or light color.

White and light colors are used for the surface of the wall shed or the appearance of the props and partitions, which will increase the sense of spaciousness. However, with deep colors, people will feel confined and depressed.

4. Small scale is adopted in the booth design.

In a small exhibition space, the booth shape and display props must not be too large, but should be coordinated with the scale of the exhibition space. The scale selection should be based on the above body scale to make the audience feel cordial and comfortable.

5. Reduce the number of display props.

The exhibition hall is small, the display density of exhibits must be small and few, and the passageway must be wide to ensure the personal safety of the audience and make the exhibition hall appear wide.

6. The display of exhibits should be simple and integrated.

No matter the appearance of the booth image, or the appearance of the exhibits and other props, try to be "neat" and "simple", and absolutely avoid complicated and trivial shapes. It must be bright, simple, and generous to make people feel comfortable after watching. This is particularly important.

7. Do not use or use less decorative patterns.

The exhibition hall is small, so it is not suitable to use many large scale and strong color patterns, because the contrast of these patterns will make people feel that the exhibition hall will become smaller, and will dominate. A little separate pattern can be used (such as logo, inscription, tail flower, etc.). If you have to use a large area pattern, you must use a small flower pattern, and the color should be light.

8. Use less but refined and focused techniques.

The exhibition in the small space must select the most typical and representative exhibits; Moreover, these exhibits should also be treated differently, with distinct priorities. They should also be differentiated in terms of display methods, color selection, lighting quality and artistic techniques, rather than being stereotyped. The "small booth" will be transformed into a "large space" with careful carving.