Matters Needing Attention In Clothing Version Room Equipment

　 I. computers

1, the computer system is best to work in clean environment, the right switch machine. (unable to turn off the power directly).

2, strictly prohibit live plug and pull external equipment. (external equipment means: Plotter , digitizer, printer, etc.)

3, the computer and drawing machine must have a stable voltage supply (if there is no stable voltage, it is recommended to install a voltage stabilizer).

4, do not install and delete programs at will. To prevent sudden power failure, loss of files and data and damage to computers, it is best to install UPS uninterruptible power supply.

5, the computer configuration should be reasonable, such as the power supply of the computer is too poor, easy to burn the motherboard, parallel port, serial port and so on.

6, electrostatic interference, grounding wire; and so on.

　　 Two. Digitizer

1. Finish drawing (reading) and close the machine. Prevent excessive or too low voltage.

2. Version room equipment The power cord should be placed neatly, placed in a safe place to prevent people from walking around and tripping the line.

3. When the machine is not used, the cloth should be covered with dust; and so on.

　　 Three. Matters needing attention in drawing machines

1. When the machine is in operation, it should not directly insert data lines. (it will cause unnecessary damage to the serial port and serial port of the machine).

2, when the machine is not operating, try to lift the pressure wheel.

3, the machine does not operate as far as possible to cover the machine with cloth and prevent dust from falling into it. (accelerating the aging of the electronic circuit such as motherboard, reducing the service life of the machine).

4, when the machine is in operation, try to keep the machine far away from the wall, reduce the echo, and also reduce the noise of the machine.

5. Lubricate the advanced sewing machine oil properly at the place where the car axle is moving, and increase the service life of the pen truck.

6. If there is abnormal sound when the fan turns, just open the hood and drop a bit of advanced sewing oil in the place where the fan is rotating. (pay attention to safety!!!)

7. machine In operation, anything, especially hands, must not be allowed to move close to the left and right sides of the pen to prevent accidents.