Shenyang Hongda JWF1312B Drawing Frame

　　 JWF1312B Drawing frame is a new generation drawing frame based on JWF1312 drawing frame and JWF1312A drawing frame, which is redesigned by optimizing mechanical structure, improving evenness control and improving electrical control.

The machine's even system has wider selection and can choose two or even UQA or EDA leveling systems according to the needs of customers. The company has also optimized the transmission box design, simplifying the transmission structure, greatly improving the service life of the transmission belt, and making the lubrication more convenient and reliable at high speed. The self stopping structure of the cradle, cluster, press roller and so on adopted the contact self stop and proximity switch, which greatly improved the reliability of the above processes and reduced the maintenance cost.

By optimizing the detection platform, the transmission parts installed on the detection platform can be installed. Installation datum The accuracy is improved. Through the improvement of the whole detection box, the accuracy and frequency of the feeding sliver will be further improved.

　　 Type JWG1779 Towel loom

The JWG1779 towel loom has adopted the leading technology and manufacturing level in China. The machine is characterized by high speed, low energy consumption, low vibration and low noise.

It is designed with a cloth operated loop forming mechanism. The ring lifting mechanism is one of the important institutions of towel looms. The cloth operated ring lifting mechanism can make wool, warp and weft interwoven into terry loops to form towel tissues. It uses the electronic control towel system, and uses the servo motor to drive the four link mechanism to complete the towel loop action. Towels with 3 weft, 4 weft, 5 weft and 7 weft can be woven according to fabric requirements, so as to obtain high quality products.

It uses multi loop control of Terry tension and ground warp tension. When weaving towel tissue and side grain organization, it can control the tension of wool warp by stages. It can not only achieve good loop effect, but also increase production efficiency. This machine uses variable speed weft density weaving, and variable speed weaving of main motor through frequency converter to improve production efficiency. In addition, it can control the coiling servo motor by programming, and finish weaving weft with variable weft.

　　 JWG9201A large V cheese rack

The JWG9201A large V cheese rack is suitable for all kinds of warping machines such as CGGA114 series and G1201. It is suitable for 97 ~ 3.64tex pure cotton, chemical fiber and blended yarn.

The JWG9201A large V bobbin is replaced by an electric cycle chain, and the cylinder is replaced for 2~3 minutes at a time. When changing the cylinder, the machine will drive the chain to move as long as the button is pressed, making the cylinder changing process more centralized and efficient.

The self stopping mode of the broken ends is photoelectric single yarn self stopping. It can not only react quickly when broken, but also prevent the warp shaft from being broken by the broken ends. The type of yarn clipper is collectively controlled and cylinder pull rod, which ensures high speed operation of yarn under low tension and prevents loosening of yarn when it is stopped.

The cleaning device of the JWG9201A large V bobbin is single yarn blowing. This blow out mode can purge the flying flowers in view of the flying position of the flying yarn, avoiding the yarn from producing cotton defects. It also has automatic identification head function, which can prevent the quality accident caused by the leakage and hanging yarn of the truck.

　　 JWF1302B drawing frame

The JWF1302B drawing frame has a high-speed design, which is used by the main supplier for spinning carded yarn and air spinning. Its cleaning rod and roller roll up and down with the pressure cradle, clearing the obstacles for high-speed output. The sealed air duct and the negative pressure device ensure the suction effect of vacuum suction. The online check device of parallel roller press can ensure the quality and safety of the output sliver.

It adopts a new design of sealing cover. The column turns the arm to change the barrel automatically, advances forward, enhances the operation efficiency. The new concave convex roller gap design makes replacement and adjustment more convenient. Its automatic circulation control adopts PLC, and the self leveling control adopts the warp and weft EDA self leveling device. The following cleaning adopts pneumatic automatic control to make cleaning more timely and thorough. In addition, the machine also has a 10.4 inch Android touch screen. The interface is more concise and smooth, and the operation is more convenient.