High Demand For Energy Saving And Emission Reduction, Printing And Dyeing Industry Will Eliminate Backward Production Capacity

Recently, the Ministry of industry and Commerce issued a notice to make good preparations for the elimination of target plan in 2015 and 13th Five-Year. The Ministry of industry and commerce requires that we should focus our efforts on innovating our thinking and methods. eliminate The existing catalogue defines backward production capacity; the two is to eliminate backward production capacity such as environmental protection and energy consumption; the three is to promote structural adjustment and exits excess capacity. The Ministry of industry and Commerce asked for a comparison of the "12th Five-Year" elimination of backward production capacity tasks, and formulated 15 key industries in leather making, paper making, printing and dyeing in 2015. In addition, in line with the implementation of environmental protection and energy consumption standards and the adjustment of structural adjustment, key industries should be formulated, especially the elimination of overcapacity contradictions and the prevention and control of air pollution in the tanning, papermaking, printing and dyeing industries in 13th Five-Year, and by 2017.

Eliminate backward and promote high-end process

Li Yi, vice president of the China Textile machinery and equipment industry association, said: "eliminating backward production capacity in the printing and dyeing industry will create more market space for advanced equipment, and promote the adjustment of the product mix by many domestic low-end equipment manufacturers, and eventually accelerate the development of the entire printing and dyeing industry." Li Yi pointed out that compared with the previous dyeing and printing equipment, the more advanced, energy-saving and environmental protection equipment has become the mainstream of the market. For example, dyeing equipment pays more attention to low bath ratio, and air flow dyeing machine will be more popular. After finishing equipment is more intelligent, such as online fault diagnosis and online control, it can accurately weigh and allocate additives and other raw materials, and effectively reduce the failure rate of equipment, to provide users with continuous production protection. In addition, the use of advanced dyeing and printing equipment also urges enterprises to pay more attention to the improvement of production links and processes, and enterprises should view the characteristics of energy saving and environmental protection from the perspective of the whole production process and realize the green production of the whole industrial chain.

Bao Dequan believes that the elimination of backward production capacity of printing and dyeing is a good policy for our printing and dyeing industry. He said: "for many enterprises, eliminating backward production capacity can avoid vicious competition in the market, and effectively solve the problem of insufficient orders, protecting the interests of high-quality enterprises and improving profitability. At the same time, it can also change the image of China's low and middle price in the global printing and dyeing industry, which has always been based on low price and volume. It will prompt enterprises to spanform and upgrade rapidly, innovate and innovate, attach importance to R & D innovation ability, increase the variety of products that meet the needs of the market and embark on the development path of green industry.

Challenge and development.

The elimination of backward production capacity brings high-end and green development opportunities to printing and dyeing equipment manufacturers. Meanwhile, it will inevitably bring many challenges to many small and medium-sized enterprises. Powerful large enterprises will continue to develop advanced, environment-friendly and energy-saving new products. The increase of domestic production equipment cost will inevitably accelerate the spanfer of middle and low end industries to Southeast Asian countries and regions, and many small and medium enterprises with low end must also face the situation that they can not operate and shut down.

However, instead of eliminating backward production capacity and bringing about passive spanformation of enterprises, Chu Jianan believes that improving equipment level is an inevitable way for enterprises to develop continuously. Nowadays, domestic equipment user enterprises do not choose semi-automatic or even manual equipment for many years ago. In order to save costs, domestic textile manufacturers are facing more difficulties than people. Some enterprises have enough orders, but the workers are not enough, so the production line is unable to start. Chu Jianan said: "this situation makes textile enterprises have to use more computer operations to reduce manual labor, thereby reducing production costs. This also urges the equipment manufacturer's products to be upgraded and realized. automation Energy saving. Otherwise, even if they are not eliminated because of backward production capacity, they will face the fate of being eliminated in the future. In addition, the spanfer of middle and low end industries to countries such as Southeast Asia and other countries will inevitably make China's middle and low end roads more and more difficult. Therefore, the state's policy of eliminating backward production capacity is an expedient measure to help enterprises develop in a short time.

Small and medium sized enterprises face many ways to cope with competition

From the perspective of market competition, large and powerful enterprises seem to be able to develop better. At the same time, the cost advantage of products can even monopolize the market, while small and medium-sized enterprises are relatively difficult. However, Li Yi believes that in the current market environment, small and medium-sized enterprises "small boat good turn around", perhaps on the contrary can achieve better development. It is clearly not an advantageous way to combine production and assembly technology. Small and medium-sized enterprises can cooperate with large enterprises by developing some new products with market demand, such as digital monitoring technology of continuous dyeing and printing equipment.

At the same time, Chu Jianan believes that enterprises adhere to R & D investment and technological spanformation, but also strive to break through the "ceiling" of enterprise development. He pointed out that the development plan of the company in the next 5 years is to provide technical services and achieve 1 to 1 of sales revenue. The company will start with the concept of building 4S shop, and provide product parts, regular maintenance service and post spanformation service for different equipment enterprises, and even develop into equipment rental companies in the later stage. In addition, the company can also train professional and technical personnel on this platform, and provide the most advanced technology for different enterprises by integrating the best technicians. By doing well in service, we can expand our company's business and make use of Internet thinking and tools to save more enterprises.

We need to strengthen our sense of social responsibility.

Finally, under the policy of elimination of backward production capacity, whether enterprises can really implement backward production capacity is crucial for industrial development and environmental protection.

Li Yi believes that some phenomena must be avoided in the process of eliminating backward ones. For example, individual enterprises are not eliminated but will shift backward production capacity to relevant enterprises. policy Less stringent areas continue to produce. Only by eliminating fluke psychology and improving social responsibility, can enterprises really eliminate this phenomenon. Bao Dequan also pointed out that while setting up the concept of green production, the government departments should also strengthen supervision and control, and stop the activities such as "guerrilla" and "steal emissions", so as to really strengthen and standardize the determination to eliminate backward production capacity.