Most Trading Volume Of Textile Machinery Suffered A Decline In 2015.

international

The thirty-eighth phase of the annual volume of international textile machinery statistics released by the Federation of manufacturers shows that most of the last year's statistics show that

The volume of trading has declined.

Among them, the volume of new staple spinning spindles decreased by nearly 8% compared with the same period last year; the number of long spun spindles and air spinning machines that had been shipped had decreased by 61% and 6% respectively; the number of spindles of the drawn texturing machines had been reduced by nearly 26%, and the turnover of new large circular machines decreased by 6% compared with the same period last year.

The delivery volume has increased by 14%, and the turnover of the flat knitting machine has increased by 52%.

The statistics of the International Federation of textile manufacturers in 2015 were the result of cooperation with more than 140 home textile machinery manufacturers, representing a comprehensive assessment of global output.

Short staple spinning machine dropped nearly 8%

Long fiber spindles dropped by 61%.

In 2015, the volume of new staple spinning machine decreased by nearly 8% compared with the same period last year, a second consecutive year decline.

The number of staple spindles dropped to about 9 million spindles, the lowest level since 2009.

Most (92%) new staple spun sold to Asia, down 7% compared to the same period last year.

Among them, the world's largest buyer of short staple textile machinery, China, dropped by 26%, while the sales of spindles sold to Bangladesh, Indonesia and Vietnam increased by 97%, 4% and 31% respectively.

In 2015, 4 of the world's top 5 staple textile machinery importers came from Asia: China, India, Vietnam, Bangladesh and Indonesia.

The global trading volume of long staple (Yang Mao) spindles dropped from about 138 thousand spindles in 2014 to nearly 54 thousand ingots in 2015, a drop of 61%.

In the past few years, Turkey has been one of the major investors in long staple spinning, but the long fiber spindles sold in the country in 2015 dropped by 83%, from 67 thousand in 2014 to 11 thousand in 2015.

Most (58%) long staple spindles are sold to Asia, and about 41% of long staple spindles are sold to Europe.

In 2015, Iran was the largest importer of long staple ingots, with an import volume of 14 thousand and 200 spindles, followed by China and imports of over 13 thousand spindles.

In 2015, the turnover of rotor spinning machines dropped to 383 thousand spindles, a decrease of 6%.

About 81% of global trading volume is exported to Asia, with a slight increase of 2%, about 312 thousand.

On the contrary, the rotor spinning machines sold in North America and Western Europe decreased by 47% and 60% respectively.

Sold to the largest importer of rotor spinning machines in the world, China's rotor spinning machine has surged by 66%.

The importers of the world's second and third largest spinning machines are India and the United States.

The trading volume of the bomb increased sharply.

Shuttleless loom volume growth

The volume of the global single heater stretch deformation spindle (mainly for nylon filament) decreased from more than 6500 in 2014 to 1200 in 2015, a drop of nearly 82%.

About 65% of these spindles are sold to Asia, followed by Eastern Europe and South America, accounting for 32% and nearly 3% respectively.

The volume of the double heater stretch deformation spindle (mainly used for polyester filament) continues to decline, and the global trading volume is 322 thousand spindles, down 25% from the same period last year.

Asia accounts for about 81% of the world's trading volume, of which China accounts for 57%, the largest investor in the world.

In 2015, the volume of global shuttleless looms increased by 14% to about 82 thousand units.

Among them, the volume of water jet looms increased by 24%, to nearly 30 thousand units, and the volume of rapier / loom looms increased by 17% to 32 thousand.

On the contrary, the volume of air-jet looms dropped by more than 1% to about 20 thousand units.

It is no surprise that Asia is still the main destination of all kinds of shuttleless looms (jet, water jet, rapier and loom), accounting for 93% of the world's total delivery volume in 2015.

Among them, loom looms accounted for 39%, rapier loom / loom 37%.

In the volume of shuttleless loom sold to Europe and North America, the percentage of rapier / loom loom is 75% and 25% respectively, and the proportion of loom loom is 8% and 2% respectively.

Big circle continues to slide.

There has been a significant increase in flat knitting machines.

In 2015, the total volume of global circular machines dropped to 26 thousand and 700 units, a decrease of 6%.

About 88% of all kinds of circular machines are exported to Asia, of which China is the largest buyer, accounting for 53%.

India and Bangladesh ranked second and third respectively, buying 6500 units and 3100 units respectively.

For the electronic flat knitting industry, 2015 was a good year, with a global volume of 70 thousand and 100, an increase of 52% over the previous year, the highest increase since 2011.

No surprise, Asia is still the largest buyer, accounting for 93% of the total delivery volume.

Among them, China is still the largest buyer, and its import volume has increased from 19 thousand to 35 thousand and 500.