Guangxi: Clothing Quality Sampling Inspection Pass Rate Of 86.25%

The Guangxi Zhuang Autonomous Region industry and Commerce Bureau recently released to adult clothing and sports clothing The results of the quality inspection test showed that the 80 batches of goods had a 13.75% pass rate and a pass rate of 86.25%. The unqualified items mainly involve fiber content, product identification, and color fastness to rubbing.

According to the introduction, the Guangxi market supervision department has sampled 60 batches of adult clothing and 20 batches of sportswear in three shopping malls, supermarkets and stores in Nanning, Liuzhou and Beihai respectively. According to GB 18401-2010, "basic safety technical specification for national textile products", GB 5296.4-2012 "instructions on the use of consumer goods, textiles and textiles", as well as an enterprise standard or product indication index that has been put into effect, 10 items of product identification, fiber content, decomposable carcinogenic aromatic amine dye, water fastness and so on are entrusted to the testing institutions. The results showed that in the 80 batches of the samples, the fiber content was not up to 8 batches, the product identification was not qualified 8 batches, and the color fastness of rubbing was unqualified 3 batches.

The main reason for the failure of fiber content is measured. fibre The deviation between the type and the mark, and the deviation between the measured value and the nominal value exceeds the standard tolerance range. The reasons for the discrepancy between the fiber content and the actual measurement indicate that the production management of enterprises is not strict, and they do not attach importance to the inspection of products. In order to reduce the cost and save the inspection cost, some enterprises blindly mark the data on the basis of the data supplied by the supplier.

The failure of product identification is mainly manifested in the lack of product specifications and specifications. The reason for the unqualified marks is that some producers and distributors are vague, incomprehensie, and incomprehensiblly aware of the labeling requirements, resulting in deliberate or unintentional omission or mislabeling. In addition, some enterprises may have product standards which deliberately do not label their products to escape the quality requirements that their products must meet.

Color fastness is mainly assessment. dyestuff There must be a certain degree of fastness on the top of the fiber. Otherwise, the pigments will fall off and spanfer to the skin during the wearing process, which will harm the human body or contaminate other textiles, which will affect the consumers' health and beauty. The main reason for the failure of color fastness is that the fabric is not inspected before commissioning, and the raw materials purchased are not evaluated according to the standard requirements. Although color fastness is not a harmful factor. However, mandatory standards and product standards have made clear requirements for color fastness, while those with substandard products are not qualified.

Consumer reminder

Pay attention to see the product instructions, that is, product identification, because product identification is a tool to convey information about the performance, quality and usage of products to consumers. Consumers should try not to buy clothes without instructions and labels to protect their rights and interests. When choosing textile products, purchase is preferred. Pure cotton For products with good permeability, the fabric should be light and soft. If the product has a pungent odor, be careful when choosing it.